Transcript
Million Colors T8 LED Tube User Manual This Million Colors T8 LED Tube Light can give out millions of colorful light. You can select any color you like with just any power switches. It takes only a few minutes to replace your old tubes with hardly changes on the original electric circuit. The Tube itself is made with 5050 SMD RGB-LEDs, which is of super Bright. Replacement It is very easy to replace the old fluorescent lamps. Please view attached image bellow: Use Instruction ① POWER On/Off : Use old bulb switch can do power on or off. ② COLOR select : A. When installation completed, turn on the light and then quickly turn it off. B. Switch the power again, the light will changed colors automatically. First start with 20 stored colors, then goes to random. C. When you saw your favorite color, you could turn the light off at once. D. Turn on the Light again, the color of the light will be your favorite one, it will not change any more E. If you are tired of the current colors, repeat A-D operation to select color again. Note: One switch can control many T8 LED Tube Light simultaneously. Please see following contact drawing. Using method is the same as A-E.
