Download manual - Seiler Microscope

Please note: Please take care when connecting the cables as the connector pins are
ELECTRICAL CONNECTIONS
fragile. When it is necessary to use a transformer, it is recommended to use one that is
insulated.
Please note: Please take care when connecting the cables as the connector pins are fragile. When it is necessary to use a
Connect thetocables
following
the steps below:
transformer, it is recommended
use one
that is insulated.
Connect the cables following the steps below:
•
•
•
•
•
Connect
the Power Cable to the
ConnectthePowerCabletotheMultivoltageACCable
Multivoltage
AC Cable Connector on
ConnectoronelectricalpaneloftheColumn;
electrical panel of the Column;
ConnectthePedalCabletotheControlPedalConnector;
Connect the Pedal Cable to the Control
Connectthecableleadingoutofthemicrofocussystemtothe
Pedal Connector;
Microfocus/ZoomCableConnector;
Connect the cable leading out of the
ConnecttheXYConnectioncabletotheXYSystem;
microfocus system to the Microfocus/Zoom
Connectthevideosystempowercabletothe12VDCPower
Cablevideo
Connector;
Outupt connector. (where
system is included)
Connect the XY Connection cable to the
XY System ;
Connect the video system power cable to
the 12VDC Power Outupt connector.
(where video system is included)
Lower View of Arm, showing where electrical connections are made.
MICROSCOPES-7.5.1-MOP-01 – Review A - Mach 2010
Issue: 2010
– 11 –