Download Application Suite User`s Manual

Terminal Manager Services
device is left in the ‘Locked’ mode. The ‘S03’ response indicates the current operating state of
the clock- locked, interactive, or at a prompt.
Clock Status Reporting, when enabled, will cause CMINetServer to send the following
messages to Message Server for delivery to all client applications:
• ‘NS3111’ – device has connected
• ‘NS3114’ – device has been disconnected on demand
• ‘NS3116’ – device connection has been terminated due to failure of device to respond
The three menu items ‘Get Configuration File’, ‘Refresh List’, and ‘Update Status’ all
affect the display of the network tree in the fixed window. Their operation will be discussed on
the section describing the contents of the network tree display. The remaining menu item
‘Version’ sends a command to NetServer through the TCP connections and receives the
following response which will be displayed in the ‘Connection Status’ window of the ‘Show
Comm’ display.
NetServer
NetServer
Release: F00229
Version: x.x.x
The Schedules submenu contains menu items for setting the schedule of global system
functions. Currently, only the Set Time function is supported as a global function. Selecting the
‘Set Time’ menu item will bring up a schedule dialog box similar to the one used to schedule
connections for terminals.
Figure 16
Global Set Time Schedule
The set time schedule dialog box is used to set the time of day when CMINetServer will
send the current system to all connected devices. The schedule is a daily schedule, and will be
User’s Manual
©1996-1998 Control Module, Inc. – ALL RIGHTS RESERVED
Version 2.0 5.10.01
Page 36