Download Wilhelm_HIL_Thesis_BINDING_FINAL - UWSpace
Transcript
Figure 10: Single polymer electrolyte fuel cell The bipolar plate in Figure 10 acts as a current carrier and provides physical structural rigidity to the cell. It also plays a key role in reactant gas delivery and product water removal. Modern fuel cell bipolar plate design reduces or eliminates reactant gas humidification requirements by wicking water to dry areas of the membrane and removing water from saturated areas of the gas diffusion layer 21. Bipolar plates were originally produced from machined graphite, but are now most often either stamped and anodized metal or molded conductive polymer. The gas diffusion layer distributes gases to the reaction sites on the catalyst layer and wicks water from the membrane to the flow channels in the bipolar plate. It is composed of carbon cloth with water permeability and physical characteristics that maximize performance 22. The polymer electrolyte membrane and catalyst layer are manufactured as a single unit, known as a membrane electrolyte assembly (MEA). The MEA facilitates the fuel cell reaction in Figure 10. It allows protons to travel from the anode to the cathode during the reaction, but is an electronic insulator forcing the electrons produced to travel through an external circuit and do work. The reaction on both the anode and cathode is catalyzed primarily by platinum, but this area is the focus of research to develop new catalysts and doping compounds to reduce cost and increase functionality such as catalyst regeneration 23. The sulfate group shown in the simplified chemical representation of a PEM shown in 13