Download MAINTENANCE INTERVALS - Safety

SEBU8354-07
155
Maintenance Section
Bucket Lower Pivot Bearings - Lubricate
i02814823
Bucket Lower Pivot Bearings
- Lubricate
i03657242
Bucket Tips - Inspect/Replace
SMCS Code: 6805-040; 6805-510
SMCS Code: 6101-086-BD; 6107-086-BD
Personal injury or death can result from the bucket
falling.
Block the bucket before changing bucket tips.
Bucket Tips
Illustration 127
g00891053
Z-Bar
Illustration 129
g00101352
(1) Usable
(2) Replace the tip.
(3) Replace the tip.
Check the bucket tips for wear. If the bucket tip has a
hole, replace the bucket tip.
1. Remove the pin from the bucket tip. The pin can
be removed by one of the following methods.
• Use a hammer and a punch from the retainer
side of the bucket to drive out the pin.
Illustration 128
g00891056
VersaLink
Wipe off the fittings before you apply any lubricant.
Apply lubricant to the grease fittings. The grease
fittings are located on both sides of the bucket.
• Use a Pin-Master. Follow Step 1.a through Step
1.c for the procedure.