Download - Liberated Manuals

TM 38-470
(7). The following is a list of items required for recharging each static free breather system:
Part Number
Materiel
4 spot color-change
3456P – fits SAE AS26860 type humidity indicator
humidity indicator disc
assembly
Dow Corning #732
2 each*
Multi-purpose silicone
sealant, MIL-A-46106
100
Bagged desiccant, MIL6850-00-264-6572
pounds
D-3464
50
Silica desiccant, MIL-D6850-00-616-9146
pounds
3716, type 1, grade H
1 each
Bag, nylon, 58” x 36”
Fabricated item
4 each
Bag, nylon, 22” x 60”,
Fabricated item
with ties
* Additional silicone sealant needed for ISO shelters along with nylon rope, NSN 4020-00-2633483
Quantity
1 each
Miscellaneous hand tools are required.
Contact the USAMMA for specifications and fabrication information on acquiring static free breather systems.
SECTION XV. AVIATION SUPPORT EQUIPMENT
5-15. Detailed preservation requirements.
a. Aircraft. Presently aircraft are not authorized for APS storage, however, aviation support equipment is authorized.
b. Tool kits and sets.
(1) Non-CH storage. Not applicable.
(2) CH storage. Kits and sets will be biannually inspected for condition and completeness. Components will be
cleaned and protected as required. Non-electrical metal components will be wiped with a rag dampened with preservative
oil. Components will be returned to and properly positioned in containers or tool box as appropriate.
c. Air mobile shelters.
(1) Non-CH storage is not applicable.
(2) CH storage.
(a) Open shelter and inspect shelter and tentage for damage. Repair as necessary in accordance with TM 554920-376-14&P.
(b) Preserve uploaded tool kits and sets in accordance with paragraph 5-14b above.
(c) Clean shelter and tentage inside and out with a mild detergent solution. Rinse and dry thoroughly.
(d) Clean grounding rod and tent poles and laterals. Tape together with ASTM-D5486, type IV, tape. Stow flat
on floor diagonally.
(e) Clean electrical cables and coils and tape together with ASTM-D5486, type IV, tape.
(f) Fold tentage and stow in shelter.
(g) Apply a small quantity of lubricant to each hinge and cover hasp.
(h) Lower hinged cover and secure locking hasp.
5-48