Download - Fujitsu

On the DC Input Power Model, the
"Environmental Status" and Some Part of the
"FRU Status" Information Is Not Displayed (CR
6853843)
This issue is resolved by updating the system firmware to 7.2.7.b or later.
On the DC input power model of SPARC Enterprise T5120 Server, when you execute
the prtdiag command of Solaris OS, the "Environmental Status" and some part of
the "FRU Status" information is not displayed.
Incomplete Data Output Example:
============================ Environmental Status ============================
<-- No data output.
============================ FRU Status ============================
Location
Name
Status
-----------------------------------------------------SYS
MB
enabled
SYS
HDD0
enabled
SYS
HDD1
enabled
<-- Part of data is not on display.
Workaround: None. From ILOM, check the component information and the status of
fan, temperature, power sensor and so on.
114
SPARC Enterprise T5120 and T5220 Servers Product Notes • March 2010