Download AUTOMOTIVE SPECIAL TOOLS

AUTOMOTIVE SPECIAL TOOLS
Water Pump & Multipurpose Cleaning Gun
GM Water Pump Socket
6060A
6046
Similar to
Kent-Moore J-43181
• Works on 1993–newer Cadillac 4.6L V8 Northstar engine,
and 1995–1999 Oldsmobile Aurora 4.0L V8.
• 1/2" sq. drive for use with 1/2" drive breaker bar or
ratchet.
• Tool is designed to self-center in the water pump housing,
allowing the tangs to fully engage the water pump for
removal or installation.
No. 6060A – GM water pump socket. Wt., 2 lbs., 10 oz.
GM Heater Line Quick-Connect Release Tool
• Specially designed for separating quick-connect fittings on
heater lines of 1999–2006 Chevy and GMC C/K trucks.
• Tool snaps around the hose and simultaneously
depresses the locking tabs to disengage the fitting.
No. 6046 – GM heater line quick-connect release tool.
Wt., 2 oz.
Similar to Ford
No. 303-249
(T92P-70010-AH)
7784
Ford Gear-Position Sensor Adjuster
When you’re adjusting the manual-lever position sensor on
a Ford automatic transmission, this tool gets the detent
setting right the first time.
• For use on E40D, AXOD-E, AX4N, AX4NS, C6, and
AOD-E automatic transaxles and transmissions.
No. 7784 – Ford gear-position sensor adjuster.
Wt., 2 oz.
“Blast-Vac” Multipurpose Cleaning Gun
• Perfectly suited for quick and efficient cooling system
6043
138
flushing. Simply attach it to radiator or heater hoses and
you’re in business.
• Also usable in washing engines and even shop floors.
• Two simple connections: one to shop air and one to a
typical water faucet.
• No. 6043 creates a unique vortex air/water blast for
powerful cleaning applications.
• The tool can also be used to vacuum by turning the
venturi inside the gun in the opposite direction. Air flow
is reversed to create a strong vacuum.
Note: While normal water pressure will handle the
majority of a cooling system flush, short blasts are
sometimes needed to loosen some contaminants from
within the system.
No. 6043 – “Blast-Vac” multipurpose cleaning gun.
Wt., 13 oz.