Download LED REAR LIGHT BAR KIT - Harley

Transcript
-J06123
REV. 2014-10-01
LED REAR LIGHT BAR KIT
GENERAL
Kit Number
67800491, 67800492, 67800493, 67800494
Models
For model fitment information, see the P&A retail catalog or
the Parts and Accessories section of www.harley-davidson.com
(English only).
Installation Requirements
Loctite® 271 Threadlocker and Sealant - Blue (Part No. 9967197) to secure the screws.
Be sure that all lights and switches operate properly before
operating motorcycle. Low visibility of rider can result in
death or serious injury. (00316a)
BCM PROGRAM PROCESS
The BCM will self-learn the LED turn signals by activating the
Hazards after LED installation. Activate the Hazard Warning
Lamps (four-way flashers). See operator's manual or service
manual. The BCM ignores the first 8 cycles of the Hazards.
The BCM learns during the next 8 Hazards. The BCM is
updated after 16 cycles.
SERVICE PARTS
The rider's safety depends upon the correct installation
of this kit. If the procedure is not within your capabilities
or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation
of this kit could result in death or serious injury. (00308a)
is08414
1
A
Kit Contents
See Figure 1 and Table 1.
INSTALLATION
To prevent accidental vehicle start-up, which could cause
death or serious injury, remove main fuse before proceeding. (00251b)
1.
Remove the existing rear light bar. See the service manual.
Retain screws (A).
2.
Remove the license plate bracket if it is attached to the
light bar. See the service manual. Retain hardware and
parts.
3.
4.
Figure 1. Service Parts: Light Bar Kit
Table 1. Service Parts
Item
1
Part Number
67800491
LED Light bar kit, chrome, smoked 67800492
Install the license plate bracket to the new rear light bar.
See the service manual. Secure with screws removed
earlier.
Install the new rear light bar. See the service manual.
Secure with screws (A) removed earlier.
Description (Quantity)
LED Light bar kit, chrome, red
LED Light bar kit, black, red
67800493
LED Light bar kit, black, smoked
67800494
Items mentioned in text, but not included in kit.
A
Screw (2)
Install all other components or parts that were previously
removed.
-J06123
Many Harley-Davidson® Parts & Accessories are made of plastics and metals which can be recycled.
Please dispose of materials responsibly.
1 of 1