Download Specs_Vol 3_Div13thr.. - Precon Industries File Access

UPH Barracks
Fort Hunter Liggett, CA
***Safety Pays***
Certified Final Submittal
W912QR-13-R-0038
Chloride, Polyethylene, and Rubber
Insulating Tape
UL 512
(1993; Rev thru Jan 2008) Fuseholders
UL 514A
(2004; Rev thru Aug 2007) Standard for
Metallic Outlet Boxes
UL 514B
(2004; Rev thru Aug 2007) Standard for
Conduit, Tubing and Cable Fittings
UL 6
(2007) Standard for Electrical Rigid Metal
Conduit-Steel
UL 651
(2005; Rev thru May 2007) Standard for
Schedule 40 and 80 Rigid PVC Conduit and
Fittings
UL 67
(2009) Standard for Panelboards
UL 797
(2007) Standard for Electrical Metallic
Tubing -- Steel
UL 817
(2001; Rev thru May 2007) Cord Sets and
Power-Supply Cords
UL 83
(20086) Standard for
Thermoplastic-Insulated Wires and Cables
UL 869A
(2006) Reference Standard for Service
Equipment
UL 870
(1995; Rev thru Jul 2003) Standard for
Wireways, Auxiliary Gutters, and
Associated Fittings
UL 943
(2006; Rev thru Feb 2008) Ground-Fault
Circuit-Interrupters
1.2
DEFINITIONS
Unless otherwise specified or indicated, electrical and electronics terms
used in these specifications, and on the drawings, shall be as defined in
IEEE Std 100.
1.3
SUBMITTALS
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for information only. When
used, a designation following the "G" designation identifies the office
that will review the submittal for the Government. The following shall be
submitted in accordance with Section 01 33 00.00 06 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Panelboards; G
Transformers; G
SECTION 26 20 00.00 06
Page 4