Download Installation Instruction

Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools:
❑ Socket set including ratchets and extensions
❑ Screwdrivers
❑ Pliers
❑ Bench vise
❑ Wire crimping pliers, wire strippers
❑ Floor jack
❑ Measuring tape and placement markers
❑ Vehicle jackstands
❑ Safety glasses
❑ Timing light
Power Tools:
❑ Power drill
❑ Drill bits
You should understand the following skills:
❑ Power tool safety procedures
❑ Undercar safety procedures
❑ Proper measuring techniques
❑ Proper electrical assembly techniques
❑ Basic engine operation and tuning techniques which include:
-Fuel pressure measurement techniques
-Timing adjustment techniques
'
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
Technical Support Hotline at 1-800-416-8628
before you start your engine.
©2004 Edelbrock Corporation
Brochure No. 63-0190 - DC/mc
Page 3 of 28
Rev. 03/04
Catalog #70003 & #70004