Download Operation Manual - Tru

Transcript
12) Rotate the wheel until the installation knob is at a 12:00 position. Level the TR-30, and
adjust the caster knob until the caster bubble reads zero.
13) With the TR-30 held in a level position with one hand (do not grasp or hold tightly), rotate
the wheel one full turn while watching the caster bubble. Here the bubble should not move
more than 1/8 of a bubble. If the bubble does move repeat the run out procedure.
CASTER ZERO ADJUST
CASTER ZERO ADJUST
A
C
M
AN15
RED KNOB
B
D
RECOMM
ENDED RUNOUT PROCEDURE
19