Download MAINTENANCE INTERVALS - Safety

120
Maintenance Section
Quick Coupler - Lubricate
SEBU7781-02
1. The power train oil filter is located on the left side
of the machine behind the engine compartment.
2. Remove the oil filter with a strap type wrench.
3. Clean the filter mounting base. Remove any part
of the oil filter gasket that remains on the filter
mounting base.
4. Apply a light coat of oil to the gasket of the new
oil filter.
5. Install the new oil filter by hand. When the gasket
contacts the filter mounting base, tighten the oil
filter for an additional three quarters of a turn.
Illustration 182
g01037453
FWL1-Up and KZN1-Up
i02005661
1. Wipe off all grease fittings before you apply
lubricant.
Quick Coupler - Lubricate
SMCS Code: 6129-086
2. Apply lubricant through each fitting.
Reference: For more information, refer to Special
Publication, SEBU6250, “Caterpillar Machine
Fluids Recommendations”.
i02021513
Radiator Core - Clean
SMCS Code: 1353-070-KO
Illustration 180
g01037450
PDF1-Up
A grease fitting is located on each side of the quick coupler.
Illustration 183
Illustration 181
FWL1-Up and KZN1-Up
g01037452
g00387726