Download MAINTENANCE INTERVALS - Safety

SEBU7781-02
125
Maintenance Section
Tire Inflation - Check
i01921569
Windows - Clean
SMCS Code: 7310-070
Use commercially available window cleaning
solutions in order to clean the windows. Clean the
outside windows from the ground unless handholds
are available.
Note: Use a damp cloth to clean the windows. Using
a dry cloth will damage the surface of the window.
i02009134
Windshield Washer Reservoir Fill
SMCS Code: 7306-544
Illustration 194
g01311464
(4) Splines
2. Lower the pump in order to expose the splines (4).
NOTICE
When operating in freezing temperatures, use
Caterpillar nonfreezing window washer solvent or
equivalent. System damage can result from freezing.
3. Clean the male splines on the steering column.
Clean the female splines in the pump.
4. Apply proper grease to the splines. Refer to
Operation and Maintenance Manual, “Lubricant
Viscosities” for selecting the proper grease.
5. Push the pump into position.
6. Tighten the four bolts that hold the pump.
7. Test the steering system.
i02005573
g00387726
Tire Inflation - Check
Illustration 195
SMCS Code: 4203-535-AI
1. Open the engine access door on the back side of
the machine.
1. Measure the tire pressure on each tire. Consult
your Caterpillar dealer for the correct load rating
and for the correct operating pressures.
2. Inflate the tires, if necessary.
Reference: For more information, refer to
Operation and Maintenance Manual, “Tire Inflation
with Air”.
Illustration 196
g00448380