Download MAINTENANCE INTERVALS - Safety

146
Maintenance Section
Quick Coupler - Lubricate
SEBU7459-09
i01362849
Quick Coupler - Lubricate
SMCS Code: 6129-086
S/N: AYA1-Up
S/N: AYB1-Up
S/N: BAB1-Up
S/N: BAC1-Up
S/N: AYE1-Up
S/N: AYL1-Up
S/N: AXR1-Up
S/N: AXS1-Up
S/N: AYS1-Up
S/N: AXX1-Up
Illustration 225
S/N: AXY1-Up
Illustration 224
g00765907
2. Remove bolt (2). Swing the condenser away
from the radiator. Use the control knob (1) in
order to release the hydraulic oil cooler. Swing
the hydraulic oil cooler (3) and the condenser (4)
away from the radiator.
g00718871
Wipe off the coupler pins. Coat the coupler pins with
new grease.
Illustration 226
i01442049
g00101939
SMCS Code: 1353-070-KO
3. You can use compressed air, high pressure water,
or steam to remove dust and other debris from
the radiator fins. However, the use of compressed
air is preferred.
1. Open the engine hood. The radiator assembly is
located at the rear of the machine.
4. Swing the hydraulic oil cooler back into the
operating position and replace the two bolts.
Radiator Core - Clean
5. Swing the air conditioner condenser back into the
operating position and replace the two bolts.
6. Close the engine hood.