Download VOYAGE DATA RECORDER
Transcript
SAFETY INSTRUCTIONS CAUTION WARNING ELECTRICAL SHOCK HAZARD Observe the following compass safe distances to prevent interference to a magnetic compass: Do not open the equipment unless totally familiar with electrical circuits and service manual. Only qualified personnel should work inside the equipment. Turn off the power at the switchboard before beginning the installation. Standard compass (m) Steering compass (m) DCU 2.50 1.60 DRU 1.10 0.65 Microphone 0.55 0.35 VHF I/F unit 0.75 0.50 RAP 0.75 0.50 Fire or electrical shock can result if the power is left on. Do not install the equipment where it may get wet from rain or water splash. Water in the equipment can result in fire, electrical shock or damage the equipment. Attach securely grounding to the ship's body. Be sure that the power supply is compatible with the voltage rating of the equipment. The grounding is required to prevent electrical shock. Connection of an incorrect power supply can cause fire or damage the equipment. The voltage rating of the equipment appears on the label above the power connector. I