Download HYBRID BATTERY SYSTEM

Transcript
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
8.PERFORM DIAGNOSIS PROCEDURE
Perform the diagnosis procedure related to displayed DTC.
>> GO TO 12.
9.CHECK HYBRID VEHICLE CONTROL ECU POWER SUPPLY CIRCUIT
Perform the circuit inspection for the hybrid vehicle control ECU power supply circuit.
Is malfunction confirmed?
YES >> GO TO 11.
NO
>> GO TO 10.
10.CHECK INTERMITTENT INCIDENT
Perform the trouble diagnosis for intermittent incident.
>> GO TO 11.
11.IDENTIFY PROBLEM
Check the malfunctioning parts
>> GO TO 12.
12.ADJUST AND/OR REPAIR
1.
2.
Repair or replace the malfunctioning part.
Reconnect parts or connectors disconnected during Diagnosis Procedure again after repair and replacement.
>> GO TO 13.
13.CONDUCT CONFIRMATION TEST
Perform the step again that the DTC or malfunction was confirmed in this procedure.
>> INSPECTION END
Diagnostic Work Sheet
INFOID:0000000004212230
DESCRIPTION
There are many operating conditions that lead to the malfunction of
Hybrid vehicle control components. A good grasp of such conditions
can make troubleshooting faster and more accurate.
In general, each customer feels differently about a incident. It is
important to fully understand the symptoms or conditions for a customer complaint.
Utilize a diagnostic worksheet like the sample in order to organize all
the information for troubleshooting.
SEF907L
Revision: July 2008
HBB-4
2009 Altima Hybrid