Download specifications platform ladder

The top of the body between the side compartments shall be an open storage area approximately
38” wide x 14-1/2” deep and 87” long. This area shall be framed with 3”x3” 3/16” wall
extrusions. The floor shall be 1/8” embossed diamond plate supported by the body mainframe
extrusions. The body top shall have an access hole for aerial hydraulic oil fill and check.
Compartments
All body compartment walls and ceilings shall be constructed from 1/8” formed aluminum 3003
H14 alloy plate. Each compartment shall be modular in design and shall not be part of the body
support structure.
Compartment floors shall be constructed of 1/8” aluminum diamond plate welded in place.
Compartment floors that are over 15” deep shall be supported by a minimum 1.5” x 3” x 1/8”
walled aluminum extrusions. The compartment seams shall be sealed using a permanent pliable
silicone caulk. A series of louvers shall be supplied to facilitate ventilation of each compartment.
Each louver shall be 3” wide by 3/4” tall and 1/2” deep.
Compartment Sizes
The approximate compartment sizes and locations shall be as follows:
There shall be one (1) transverse compartment (L1/R1) ahead of the forward stabilizers. The
compartment shall be approximately 42.5” wide x 43” high x 94.5” deep (upper) (transverse) and
42.5” wide x 26” high x 22.5” deep (lower) (each side) and contain approximately 128.72 cubic
feet of storage space. The door opening shall be approximately 42.5” wide x 69” high.
Left Side:
There shall be one (1) compartment (L2) over the forward stabilizers. The compartment shall be
approximately 31” wide x 28” high x 26” deep (upper) and 31” wide x 29” high x 14” deep
(lower) and contain approximately 20.34 cubic feet of storage space. The door opening shall be
approximately 31” wide x 57” high.
There shall be one (1) compartment (L3) behind the forward stabilizers. The compartment shall
be approximately 48" wide x 69" high x 25.5" deep and contain approximately 48.88 cubic feet
of storage space. The door opening shall be approximately 48” wide x 69” high.
There shall be one (1) compartment (L4) over the rear wheels. The compartment shall be
approximately 50.5” wide x 20” high x 26” deep and contain approximately 15.20 cubic feet of
storage space. The door opening shall be approximately 50.5” wide x 20” high.
There shall be one (1) compartment (L5) over the rear wheels. The compartment shall be
approximately 52.5” wide x 20” high x 20” deep and contain approximately 12.15 cubic feet of
storage space. The door opening shall be approximately 52.5” wide x 20” high.
There shall be one (1) compartment (L6) over the rear stabilizer. The compartment shall be
approximately 50.5” wide x 15” high x 18” deep (upper), 19.25” wide x 27.5” high x 23” deep
(lower forward), 31.25” wide x 27.5” high x 14" deep (lower rearward) and contain
approximately 21.9 cubic feet of storage space. The door opening shall be approximately 50.5”
wide x 42.5” high.
There shall be one (1) compartment (L7) behind the rear stabilizer. The compartment shall be
approximately 15” wide x 15” high x 18” deep (upper) and 15” wide x 35.5” high x 23” deep
(lower) and contain approximately 9.43 cubic feet of storage space. The door opening shall be
approximately 15” wide x 50.5” high.
There shall be one (1) compartment (L8) down low ahead of the rear stabilizer with a
horizontally-hinged single pan door constructed of the same material / finish as the body
wheelwells. The compartment shall be approximately 15.5” wide x 8” high x 23” deep and