Download Assembly, Operator`s and Parts - 2012

Transcript
Operation - 2295 Loader
Caution
Shut tractor off and store parking stands within loader cross tube
remembering to stand on the outside of the loader arms. Start
the tractor and continue to cycle loader and attachment to verify
loader operation.
5. With the tractor in neutral, continue to retract
the lift cylinders and extend the bucket
cylinders to rotate the upright back against the
lock pin stops. Shut the tractor off and set park
brake.
6. Install both upright attachment pins and secure
with hairpin clip. Start the tractor and slowly
raise loader until the parking stands are off the
ground.
Caution
Shut tractor off and store parking stands within loader cross tube
remembering to stand on the outside of the loader arms. Start
the tractor and continue to cycle loader and attachment to verify
loader operation.
Removing Loader:
1. Raise loader to provide clearance to engage
both parking stands. Shut off tractor. Standing
along the outside of the loader arms remove
parking stands from storage position and
engage within the loader mainframe.
22