Download Philips 109b5
Transcript
Lock/Unlock, Factory Mode, Burn In, Service Mode V50 109B5 6 X Go to cover page OSD Lock OSD lock is a feature which disables the OSD controls. It can be used when the monitor is set up for demonstration purposes or when adjustment of the OSD is not desirable. Switch on OSD lock feature: Press and hold the button continuously for 15 seconds. Release the button when the message To access BURN IN mode First of all, monitor displays an image. 1. Disconnect the video cable (interface cable). 2. Turn off monitor 3. Press '" " and " " simultaneously on the front control panel,then the BURN IN mode comes on the screen of monitor as below. 50 seconds around "CONTROL MENU IS LOCKED" appears. 5 seconds around repeatly Switch off OSD lock feature: Press and hold the button continuously for 15 seconds or until the message window "CONTROL MENU IS LOCKED" disappears, and 4. Reconnect the video cable, then return to normal image. "MAIN CONTROLS" appears. SERVICE MODE (Indication-Factory mode) ------------------------> 00010 00010: stands for 1. using 10 hours already. 2. turn on/off 10 times. 3. using several hours + turn on/off monitor. To access factory mode 1. Turn off monitor (don't turn off PC) 2. Press '" " and " " simultaneously on the front control panel,then press " ",wait till the OSD menu with characters V50 109B5 97K V0.41 20030421 (below OSD menu)" come on the screen of monitor. MODEL SELECT V50 109B5 97K V0.41 20030421 Default setting of MODEL SELECT (Do not change it.) MODEL SELECT V50 109B5 97K RESERVE RESERVE RESERVE RESERVE RESERVE SWDDC LF 3 LF ON OSD Factory Mode Indicator MODEL SELECT V50 109B5 97K V0.41 20030421 3. If OSD menu disappears on the screen of monitor, press " " again (anytime), then the OSD menu comes on the screen again. 4. Using " " : to select OSD menu. 5. Using " " : to increase or decrease the setting. 6. Using " " to access/confirm the selection. To leave factory mode 7. After alignment of factory mode, turn off monitor (if you do not turn off monitor, the OSD menu is always at the factory mode), then turn on monitor again (at this moment, the OSD menu goes back to user mode).