Download autopac 300 fully automatic service manual

AUTOMATIC POLYPROPYLENE
STRAPPING MACHINE
AUTO PAC 300
OPERATION MANUAL
&
SPARE PARTS LIST IM
PO R TA
K EE P
NT !
IT WEL
L
11/02/06
Explanations for Each Model NO. :
TP-601A
: Three Phase Transit Model with Roller-Driven Table
TP-601AS : Three Phase Transit Model with Roller-Driven Table and
Stainless Steel Frame
TP-601B
: Three Phase Transit Model with Belt-Driven Table
TP-601BS : Three Phase Transit Model with Belt-Driven Table and
Stainless Steel Frame
TP-601BP : Three Phase Transit Model with Belt-Driven Table and Press Bar
TP-601BPS : Three Phase Transit Model with Belt-Driven Table,
Press Bar and Stainless Steel Frame
11/02/06
PART I
CONTENTS
1. Safety Instructions………………………………………………1~2
2. Construction and Function of Units……………………………3~5
6~8
3. Technical Date...…………………………………………………
4. Control Panel ………………………………………………… 9
10~11
5. Electric Unit ……………………………………………………
6. How to Load P.P. Strap…………………………………………12
13
7. How to Operate …………………………………………………
13
8. Recommendations for Trouble-free Operation….………………
9. Adjustments.……………………………………………………14~18
10. Installation of Arch Unit………………………………………19~20
11. Wiring Diagram …………..……………………………………21~30
31
12. Inverter Parameters Setup……….………………………………
13. Troubleshooting ……………………………………………… 32
14. Pneumatic System Diagram………………………………….…33
15. Installation of Cylinder Unit……………………………………34
16. How to connect Upstream and Downstream Machine…………35
11/02/06
1. Safety Instructions
(1) Before operating
a. Please always wear proper eye protection and safety gloves before operating this
machine.
Eye protection must be worn
Safety gloves must be worn
b. Please make sure if the power voltage is correct.
c. It can only be operated with P.P. strap; not PET strap or Polyester cord strap.
(2) During operating
a. The weight of package should not exceed 80kg(TP-601A) and 35kg(TP-601B/BP),
and the size should not be less than 250mmx250mmx20mm.
b. Check if the machine emits any smokes or unusual sound when it is running.
c. Warning
a-1. For your own safety, please read instruction manual before operating. Keep away
from arch while the machine is running.
b-2. Do not put your hands or body into the Archworking area when the machine is
running.
(3) After operating
a. Please pull out the power plug.
b. Please get rid of the dirt or impurity on the machine.
(4) Signs
Hot! Heiss! chaud!
Caution, risk of electric shock
Do not touch!
-1-
11/02/06
(5) Maintenance
a. Please turn off the power before opening the top plate.
b. Please do not touch the heater due to the high temperature.
c. Be careful with the heater if you open the front plate for 30mm.
(6) Other remainders
a. Do not alter or bypass protective interlocks
b. A safety manual must remain attached to the machine at all times
c. Do not alter circuits and machine unless authorized to do so by the manufacturer.
d. All electrical apparatus must be properly grounded.
e. Wire the machine according to the local electrical code.
-2-
11/02/06
2. Construction and Function of Units
a. TP-601A
7 Transmission group
1 Strapping head unit
These rollers are driven
by motor.
This unit is the most important part of the
machine for cutting and sealing of P.P.
strap.
2 Bandway unit
This is the arch track through which
P.P. strap forwards or reverses.
5 Body unit
4 Reel unit
Holds the strap coil.
(If strap core is 230/
280mm, you can take
off the center drum to
have core size 200mm.)
6 Electric control unit
8 Auto strap feeding unit
3 Accumulator unit
This unit accumulates the quantity of strap required
for smooth feeding into the chute track.
-3-
11/02/06
b. TP-601B
1 Strapping head unit
This unit is the most important part of the
machine for cutting and sealing of P.P.
strap.
2 Bandway unit
This is the arch track through which
P.P. strap forwards or reverses.
5 Body unit
4 Reel unit
Holds the strap coil.
(If strap core is 230/
280mm, you can take
off the center drum to
have core size 200mm.)
3 Trassmission group
These belts are diven by motor.
6 Electric control unit
8 Auto strap feeding unit
3 Accumulator unit
This unit accumulates the quantity of strap required
for smooth feeding into the chute track.
-4-
11/02/06
c. TP-601BP
1 Strapping head unit
This unit is the most important part of the
machine for cutting and sealing of P.P.
strap.
9 Pneumatic unit
2 Bandway unit
This is the arch track through which
P.P. strap forwards or reverses.
5 Body unit
4 Reel unit
Holds the strap coil.
(If strap core is
230/280mm, you can
take off the center
drum to have core
size 200mm.)
7 Transmission unit
6 Electric control unit
8 Auto strap feeding unit
3 Accumlator unit
This unit accumulates the quantity of strap required
for smooth feeding into the chute track.
-5-
11/02/06
3. Technical Date
a. TP-601A
Sealing method
Strap width:
Strap reel diameter:
Width :
Depth:
Table height:
Electrical connection:
Weight:
Heat
8 mm to 12 mm
200 mm (280mm OPTION)
1580 mm
706 mm
820 mm
AC 220V/380V/400V/415V, 3PH
330 kg
-6-
11/02/06
b. TP-601B
Sealing method
Strap width:
Strap reel diameter:
Width :
Depth:
Table height:
Electrical connection:
Weight:
Heat
8 mm to 12 mm
200 mm (280mm OPTION)
1580 mm
706 mm
825 mm
AC 220V/380V/400V/415V, 3PH
330 kg
-7-
11/02/06
c. TP-601BP
Sealing method
Strap width:
Strap reel diameter:
Width :
Depth:
Table height:
Electrical connection:
Weight:
Heat
8 mm to 12 mm
200 mm (280mm OPTION)
1580 mm
706 mm
825 mm
AC 220V/380V/400V/415V, 3PH
347 kg
-8-
11/02/06
4. Control Panel
1
Start Switch
This is the switch to start a strapping operation.
A strapping cycle is completed only after
actuation of this switch.
2
Stop Switch
HAND
Push the stop switch in case of emergency.
Simply push this the strapping operation
stop switch to completely stop.
*Lock stop switch if strapping has to be interrupted
for a short period of time. The machine will stop
but the heater element will maintain its temperature.
The machine will then be immediately ready for
operation without need for warming-up of the heater
element.
3
Reset Switch
This is the switch to activate auto strap feeding.
In addition, it is used for troubleshooting. If the strap
is mis-fed, you can push this button to solve the problem.
4 Auto/Hand/Transit Selector Switch
With the selector switch placed to HAND position,
the table conveyors will stop running and the photo eyes
will not be activated but the machine can strap if the start
switch is activated. With the selector switch is turned
to AUTO position, the table conveyor will run and the
photo eyes are activated so that the machine will
automatically strap the package when it passes below
the arch. If the selector switch is turned to
"TRANSIT", the package will be advanced without
being strapped. (The conveyor rollers/belt will run but the
photo eyes will not activated.)
5
Strap Selector Switch
This switch is used to select how many (1,2, or N) straps are
required for each package.
6
RESET
Tension Adjustment Knob
External adjustment of strap tension by step-by-step rotation
of this knob.
-9-
AUTO
STRAP/BOX
2
N
1
STOP
TRANSIT
11/02/06
5. Electric Unit
Timer, T1 30 : T1 timer determines the time necessary for strap take-up. Set
T1 timer bearing in mind the time required for strapping the minimum-size package.
Normally, Timer T1 is set at about 0.5 seconds, but may have to be adjusted depending
on arch size.
Timer, T3 31 :
When you set the machine so that it applies three straps per box, this timer defines when
the second strap is to be applied. By adjusting this timer, you can make the time
interval between application of the first/second and second/third straps identical.
-10-
11/02/06
5. Electric Unit
(OPTION For SIEMENS PLC )
33 Timer, T3 :
When you set the machine so that it applies three straps per box, this timer defines
when the second strap is to be applied. By adjusting this timer, you can make the
time interval between application of the first/second and second/third straps identical.
34 Strap After Press Bar Time
This is the timer for machine to strap package after press bar descends
35 Transit Speed (OPTION)
External adjustment of transit speed by simple turn of a dial.
36 Press Bar ON/OFF
Bundle press function only when PRESS BAR selector is set at " ON".
Strapping without bundle press when PRESS BAR selector is set at " OFF".
33
34
-11-
35
36
11/02/06
6. How to Load P.P. Strap
‧Ensure that the power
switch is turned off before
loading P.P. strap.
Step 1
Place a strap coil on the reel drum in
according to the arrow direction as indicated on the Reel Out Circular 9 .
After placing it, put the Reel Out
Circular on the strap coil and tighten it
by the Reel Nut Handle 10 .
Step 2
Thread the tip of P.P. strap into the Band
Guide Roller 11 . After that, push it through
the Free Angle 12 . At this moment, twist
the strap so that the inside part of the P.P.
strap turns out downward and outside surface
touches on the roller. See the drawing.
Step 3
Insert P.P. strap into the Pool Feed Shooter 13 ,
pushing the lever 14 down and feed P.P.
strap about 1-2 cm beyond Pool rollor 15 .
Step 4
Turn on the power supply switch, and then
push Reset Switch 17 . After about 4
seconds, the strap will automatically
go into the arch and pool.
-12-
11/02/06
7. How to Operate
8. Recommenations for
Trouble-free Operation
1. Turn on the switch (make a 90-degree
clockwise turn). The front door will
lock at the same time and the strap will
be automatically fed into the
accumulator box. If you want to open
the front door, turn off the switch first
(make a 90-degree counterclockwise
turn).
The operator can now open the front
door without risk. (See drawing below)
2. Wait for about 2 minutes until
the heater element has reached its
required operating temperature.
3. Switch to AUTO operation mode.
Make the bundles line up in the
middle of the conveyors. Let
bundles pass the photo eyes of the
machine and be strapped as the straps
number setting one by one.
4. After operation, turn off the
power supply switch.
1. Make sure to turn off the power supply
switch, when maintenance and/or exchange
of strap coil is required.
2. Pull the strap out of the Accumulator Box
and rewind it on the Reel Unit to prevent
cambering, if the machine will not
be used for long periods of time.
3. In order to change the strap width, use
the strap conversion kit which is sold
as an option.
4. When the electric plug receptacle has
to be changed, check the revolving
direction of motor. (P12 NO. 15 ).
5. Always keep the machine clean,
especially by removing dust and strap
fluff in the vicinity of the sealing head
and heater unit.
6. Do not use extension cords.
-13-
11/02/06
9. Adjustments
(1) Heater temperature
Set the knob to position 4 or 5
Adjust the heater temperature by selecting
a value between l and 6. Choose the suitable
temperature, bearing in mind the environmental
conditions of the machine. If the heater
temperature is too high or too low, a proper
seal will not be obtained. Gradually increase
or reduce the heater-knob value until
obtainging an optimum seal.
Input:220V, 230V, 240V
Output:3−5.2V
TEMP−CONT
-14-
11/02/06
(2) Feed and take-up
mechanism
If this unit is not correctly adjusted, strap feed
and take-up will become irregular.
Normally, this unit is set to accept P.P. strap
with the thicknesses of 0.55mm-0.75mm
If a different strap thickness is used, adjust the
section marked by a circle in the drawing so that
the clearance between the Upper Roller Spring 23
and the Upper Shaft Spring Hook 24 should
be the thickness of the strap you are using.
Strap can only be taken up properly if
this unit is precisely adjusted. (If not, strap
will be sealed before being tightened around
the package ) Moreover, strap will leave
the chute arch track when feedinig into it if
there is no clearance.
1. Check if the control unit returns to its
original position. Insert the strap
between Feed Roller 22 and Upper Feed
Roller 21 .
2. Loosen 2 Bolts 27 holding the right-hand
Block Arm 25 with the Press Arm Shaft
26 . Press Arm Shaft can then easily be
moved by hand.
3. Adjust so that there is a clearance between
the Upper Roller Spring 23 and the
Upper Shaft Spring Hook 24 the same
as the thickness of the strap you
are using.
4. Tighten 2 Bolts 27 .
- 15 -
11/02/06
(3) How to adjust LS3, LS2
Figure 1 shows the correct position for LS3 Proximity Sensor 31 and the Limit Switch
Cam 32 while the machine is in home position.
The machine will stop as soon as the LS3 Proximity Sensor 31 detects that Limit Switch
Cam 32 is activated. At this time, the Cam Follower 41 must stop at the corner position
on the Tension Cam 42 as shown in figure 1-1. If not, please adjust according to the
following instructions.
Adjustment
If Cam Follower 41 stops before the correct position:
1. Loosen the two M6 screws and turn the Cam Roller slightly clockwise, then tighten the
M6 screws.
2. Reset the machine and allow it to cycle again to ensure that the Cam Follower 41
stops at the correct position.
3. If the problem has not been eliminated, please repeat the "Step One" until the Cam
Followe 41 stops at the correct position.
-16-
11/02/06
If Cam Follower 41 stops beyond the correct position:
a. Please also loosen the M6 screws but turn the Cam Roller slightly counterclockwise
until the Cam Follower 41 stops at the correct position.
Figure 2 shows the correct position for LS2 Proximity Sensor 33 against the lobes of the
Limit Switch Cam 34 while machine is running.
When LS2 Proximity Sensor 33 detects Lobe A of the activated running Limit Switch
Cam 34 , the machine will stop about 0.3 seconds so that the machine can switch to
take-up . In the meantime, Cam Follower 41 has to stay on the corner position of the Tension
Cam 42 as shown in figure 2-1. If the Cam Follower is not at the correct position, please
make the same adjustment as for LS3.
-17-
11/02/06
(4) Amount of strap in Accumulator Box
The machine has already been set in its
Accumulator Box.
However, some adjustment may be
required, depending on the actual
quality or thickness of the strap used. If
adjustment is necessary, proceed as shown
in the following drawing.
a. In case that there is an insufficient amount of strap
in the Accumulator Box, loosen the Nut
27 and turn the Screw Bolt 28 counterclockwise.
b. In case that there is an excessive amount of
strap in the Accumulator Box, loosen the Nut
27 and turn the Screw Bolt 28 clockwise.
-18-
11/02/06
10. Installation of Arch Unit
-19-
11/02/06
10. Installation of Arch Unit
(1) Open the Roller table 1 , 15 .
(2) Take the LH bandway 2 off.
1PC
6 TMS, M5x8
11 HBS, M8x15
4PC
18 PW, M8 (A)
4PC
8 TMS, M6x8
12 SW, M8
2PC
4PC
(3) Slide the the arch unit 3 into the fixing brackets 4 and fix both sides of the arch
frame with 11 12 18 .
* Please note that is imperative to open the flaps of RH bandway 5 to
protect them when installing the arch unit in. (open the flaps, before inserting the arch
unit in)
(4) Set the LH bandway 2 , with 6 and 8 .
a. Please note that the arch bandway (refer Fig. A) should be positioned between LH
bandway and its fixing bracket.
b. Please set the LH bandway 2 closely to 17 corner guide (PART NO. T6-2-21260).
c. Push the 16 Band guide Spring Bracket backward to check if B will be
automatically turned open. If so, the installation is OK.
(5) Position the upper table 1 15 onto the machine body.
-20-
11/02/06
11. Wiring Diagram
a. For TP-601A, TP-601B
Ⅰ Ⅱ
Ⅰ
Ⅰ
Ⅱ
Ⅱ
Ⅰ Ⅱ
Ⅰ
Ⅱ
Ⅰ Ⅱ
-21-
11/02/06
11. Wiring Diagram
a. For TP-601A, TP-601B (For CSA)
4
A
4
2
3
2
1
3
1
A
B
B
C
C
D
D
MACHINE MODEL
E
E
F
F
PAGE
-21-1-
11/02/06
11. Wiring Diagram
a. For TP-601A, TP-601B (For CSA)
4
3
4
A
3
2
1
A
B
B
Ⅰ Ⅱ
Ⅰ
Ⅰ
Ⅱ
Ⅱ
Ⅰ Ⅱ
Ⅰ
C
Ⅱ
Ⅰ Ⅱ
C
D
D
MACHINE MODEL
E
E
F
F
PAGE
2
1
-21-2-
11/02/06
11. Wiring Diagram
a. For TP-601A, TP-601B
Ⅰ Ⅱ
Ⅱ
Ⅰ Ⅱ
Ⅰ
Ⅰ Ⅱ
Ⅰ
Ⅱ
Ⅰ Ⅱ
T1
T2
T3
L1
L2
1
2
FWD 3
REV 4
+12 5
6
7
8
9
10
11
-U1
Frequency Inverter
220V-1HP
-22-
11/02/06
11. Wiring Diagram
b. For TP-601BP
-23-
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
L1
L2
L3
PE
2
1
4
2
L3
L2
L1
3
6
1.25 mm2/ 4C
5
-QS1
Main Power Switch
-F7
15A
F4
2A
L22
-F1 5A
-F2 5A
-F3 5A
L11
L21
L31
-24-
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
L11
L21
L31
-F5
3A
L12
L11
L31
2
1.25 mm
(37) (+24V)
(30) (OV)
L11
L21
L31
rem: K5M is standard version
M
3~
2
1.25 mm / 4C
U1
V1
T3
T2
T1
L13
-F6
3A
W1
L11
L1
1.25 mm
L31
L2
1
Trip
Relay
2
FWD 3
REV 4
+12 5
6
7
(91)
8
(64)
9
(30)
10
11
-U2
Frequency Inverter
220V / 1HP
2
3
A2-(56) (PAGE 7)
0V(30)(PAGE4)
A1-(75) (PAGE 6)
-R4
TRANSIT
SPEED ADJ.
VR 5K
1
2
OV(30)(PAGE 4)
rem: Inverter is option version
-25-
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
4
3
2
1
A
A
(+24V)
(37) /P2.2C
(OV)
(30) /P2.1C
B
B
-K1
(85)
(86)
(87)
(88)
A1
A2
(97)
(30)
K
A
Stop
DC Voltage
Power ON
-K1
C
C
(+24V)
(36)
A1-(78) /P5.1E
A1-(79) /P5.1F
A1-(71) /P5.1B
A1-(76) /P5.1D
A1-(77) /P5.1E
(36) /P3.4C
M5F
D
+24V
M5F
OUT7+
OUT7-
OUT8+
OUT8-
OUT9+
OUT9-
M4+
M4-
M5W
0V
M5W
M4 IN
IN_9
IN_8
IN_7
+24V
MODEL
M4/M5 P.C.B
D
MACHINE
(15)
(16)
(10)
(9)
(12)
(11)
(14)
(13)
E
E
(5)
(6)
(8)
(7)
M
M
-YB1
M1 BRK
-M5
-M5-1
-YC2
M4 CLUTCH
-YB3
M4 BRK
F
(+24V)
(36)
(OV)
(30)
F
PAGE
4
3
2
1
-26-
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
(+24V)
(36) /P3.4C
(OV)
(30) /P2.1C
-YB4
(17)
Press Bar
SOL.
(For BP)
(+24V)
(36)
(OV)
(30)
(+24V)
(36)
(OV)
(30)
-27-
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
4
3
2
1
A
(+24V)
( 36 ) /P3.4C
BROWN
BLUE
BLACK
BROWN
B
BLUE
BLACK
BROWN
BLUE
BLACK
C
BROWN
BLUE BROWN
BLACK
WHITE
BLUE
BLACK
BROWN
D
WHITE
BLUE
BLACK
-SB4 -SB3
Ⅱ
E
Ⅱ Ⅰ
Ⅰ
-SA2
Ⅰ Ⅱ
I1.4
( .4)
Ⅰ
Ⅱ
-SA3
I1.5
( .5)
Q1.1
( .1)
I1.3
( .3)
( .0)
I1.2
( .2)
Q1.0
I1.1
( .1)
Q0.7
( .7)
I1.0
( .0)
( .6)
I0.7
( .7)
Q0.6
I0.6
( .6)
( .5)
I0.5
( .5)
Q0.5
I0.4
( .4)
( .5)
I0.3
( .3)
Q0.5
I0.2
( .2)
( .4)
I0.1
( .1)
Q0.4
I0.0
( .0)
( .3)
-A1
Q0.3
E
F
PAGE
F
rem: K5M is standard version
Inverter is option version
M4/M5 PCB
M5W
/P3.3C
(79)
( .2)
(78)
Q0.2
(77)
( .1)
MODEL
M4/M5 PCB M4/M5 PCB M4/M5 PCB
IN_7
M5F
IN_8
/P3.2C
/P3.3C
/P3.2C
(76)
Q0.1
D
Inverter
#3
/P2.2F
(75)
(.0)
(75)
Q0.0
(74)
A1
-K5M
(73)
A1
-K4M
(72)
A1
-K3M
A2
(71)
M4/M5 P.C.B
IN_9
A1
/P3.2C
-K2M
A2
(70)
A1
-K1M
A2
C
A2
B
A2
( 30 ) /P2.1C
(0V)
A
MACHINE
4
3
2
1
-28-
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
(+24V)
(36) /P3.4C
(30) /P2.1C
(OV)
2
-B9
2
-U2
( .1)
Q2.1
(81)
-HL1
(83)
I2.3
( .3)
(82)
K A1
-K4
A2
I2.2
( .2)
A
( .3)
Q2.3
A1
-K3
A2
( .2)
Q2.2
(56)
1
(55)
I2.1
( .1)
1
A
K
-A2
(54)
I2.0
(.0)
(80)
( .0)
Q2.0
A1
-K2
A2
K
A
2
(60)
-R5
3
1
RA A+ A-
2
(61)
-R3
1
3
2
(62)
-R6
3
1
RC C+ C-
DC+10V
IO
-A3
(90)
VO
RB B+ B-
MO
VR 5K
D/A Modules
2
-R2
3
1
RD D+ D-
(63)
VR 5K
VR 5K
rem: Inverter Error Signal
is option version
-29-
VR 5K
11/02/06
11. Wiring Diagram
(OPTION For SIEMENS PLC)
A1
CPU224
DC/DC/DC
214-1AD22-OXBO
A2
EM 223
DC/DC
223-1BF22-0XA0
4DI/4DO
1M
.0
.1
.2
.3
M
L+
-30-
EM 235
AI4/AQ1 X12Bit
A3
235-OKD22-OXAO
4AI/1AQ
MO
VO
IO
SIEMENS
SIMATIC
S7-200
SF
RUN
STOP
PORTO
14DI/10DO
1M
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
2M
1.0
1.1
1.2
1.3
1.4
1.5
1M
1L+
0.0
0.1
0.2
0.3
0.4
2M
2L+
0.5
0.6
0.7
1.0
1.1
M
L+
1M
1L+
.0
.1
.2
.3
RA
A+
ARB
B+
BRC
C+
CRD
D+
D-
11/02/06
12. Inverter Parameters Setup
(OPTION For SIEMENS PLC)
F0
×
F10
1
F20
×
F1
×
F11
0
F21
×
F2
×
F12
×
F22
×
F3
×
F13
×
F23
0
F4
×
F14
×
F24
2
F5
×
F15
×
F25
×
F6
70
F16
×
F26
×
F7
30
F17
×
F27
×
F8
×
F18
50
F28
0
F9
×
F19
×
F29
×
-31-
11/02/06
13. Troubleshooting
Machine
works
Problems
Incorrect strap
feed and take-up
Strap unsealed
Improper
strap tensioniog
Probable Causes
Dust and strap residues in Feed Unit
Strap end is split
Loose strap at Reel Unit
Strap jumps out of arch track
Poor quality of strap
Remedy
(1) Incorrect strap threading direction on reel holder (1) Reload strap correctly (see P9)
(2) Incorrect loading of strap
(2) Check if strap is twisted in loading section (see P9)
(3) Strap gets in between strap coil and Reel Flange (3) Reload strap
(4) Adjust amount of strap accumulated (see P15)
(4) Insufficient or excessive strap
(5)
(6)
(7)
(8)
(9)
(11) Check wire or change Heater
(10) Improper positioning of package on Table Top
(11) Wire inside or outside of Heater is broken,
loose or out of connect
(12) Adjust Heater Temperature (see P11)
(5) Check and clean unit
(6) Adjust Cutter Tension Spring or change cutter
(7) Adjust or change Brake Tension Arm Spring
(8) Adjust F/R mechanism (see P12)
(9) Cut off the damaged part of strap or change the
roll
(10) Replace the package in the center of the Sealing
Head
(12) Improper setting of temperature
(13) Adjust Tension Knob (see P11) or increase weld
(14) Change or reset Tension Jaw Spring
(15) Adjust Timer T1 (see P7)
cooling time
(13) Value set at Tension knob is too high
(14) Tension Jaw Spring is worn-out or dislodged
(15) Value set for Timer T1 is too short
-32-
11/02/06
14. Pneumatic System Diagram
-33-
11/02/06
15. Installation of Cylinder Unit
1
12
6
8
9
11
10
2
3
4
5
7
1.
2.
3.
4.
4.
Stand the cylinder unit 1 and through the shaft 8 into bracket 2 .
Fix the cylinder unit 1 on brcket 2 by 3 , 4 , 5 .
Screw the shaft 6 all into press bar 7 then tighten 8 down .
Insert the PU Tubing 9 into Tube Fitting 10 .
Insert the PU Tubing 11 into Tube Fitting 12 .
-34-
11/02/06
16. How to connect Upstream and Downstream Machine
(1) B8 Connector (for Upstream machine):
Pin 1 and Pin 2: To send signal to upstream machine for entering the package (Refer
to 11. wiring Diagram of PART I).
(2) B9 Connector (for downstream machine):
Pin 1 and Pin 2: To receive the signal from the downstream machine to pass through
the package (Refer to 11. wiring Diagram of PART I).
If there is no downstream machine, please still plug in the B9 connector to avoid
machine waiting for this signal which will cause the transit belt not running after the
strapping cycle is completed.
-35-
11/02/06
shape
classification
shape
classification
HBS
ER
TMS
RR
PMS
SR
FMS
SP
HB
BR
THS
MB
HSS
KYA
CAP
KYB
HN
KYC
WN
HBW
PWA
FLG
8x 12~ 16x0.4~0.8t
6x 13~ 14x0.8~1.5t
NTE
8x 14~ 16x1.3~1.5t
6x 15~ 16x1.0~1.5t
PWB
PWC
PN
8x 20~ 23x2.0t
6x 16~ 19x2.0t
PW
PWD
SW
DS
TW
TTP
BWW
FTP
11/02/06
This bill of material, with the aid of illustrations, all the parts used in the TP-601A/B/BP series.
When ordering, kindly submit a list using the descriptions, part no.s, and quantities as
indicated.
EXPLANATION OF BILL OF MATERIAL
The following instructions are designed to assist you when ordering parts.
1. The parts are illustrated, with indication of their part no.s.
2. As far as the contents or the book are concerned, only the assembly parts
are described, e.g. unit, group, set, etc.
3.
(a) If you want to order the control unit on page 1, please indicate the no. at the top
of the page. (T6-1-90005, T6-1-90006, T6-1-90008, T6-1-90009)
(b) If you would like to order the tension group (in the control unit), indicate the
no.on page 1 corresponding to tension group. (T6-1-60003) For further details
on the tension group see page 19.
(c) If you would like to order the whole tension arm assembly, then indicate no.
(T6-1-61001) on top of page 21.
(d) If you would like to order a tension jaw spring only, then indicate the no.
corresponding to the spring on page 21. (T6-1-61140)
4. Part no.s are to be understood as follows (parts exclusively used for TP-601A/B/BP
seried machine.)
Please find T6-1-10110 as an example below:
T6……………………………………………………..MODEL NO.(TP-601A/B/BP)
1…………………………………………………….…UNIT NO. (CONTROL UNIT)
10110…………………………………………………..PART NO. (TENSION CAM)
11/02/06
PART II
CONTENTS
1. Strapping Head Unit……………………..…...……………
1~26
2. Bandway Unit………..……………………………………27~41
3. Accumulator Unit….....…..………………………………42~48
49~56
4. Reel Unit……………..……………………………………
57~67
5. Body Unit……..…………………………………..………
6. Electric Control Unit…..………………...………………68~77
7. Transmission Group………..……….……….………..…78~96
8. Auto Strap Feeding Unit……………….………………97~101
9. Pneumatic Unit……..…….....……………..……..………102~107
11/02/06
1
STRAPPING HEAD UNIT
REF.
NO.
PART NO.
T6-1-90005
T6-1-90008
1
2
3
4
5
6
7
T6-1-90006
T6-1-90009
T6-1-10004
T6-1-20003
T6-1-30000
T6-1-40003
T6-1-50004
T6-1-50005
T6-1-60003
T6-1-70004
T6-1-70005
DESCRIPTION
T6-1-90005
T6-1-90008
T6-1-90006
T6-1-90009
Q'TY
Strapping Head Unit (For TP-601B
/TP-601BP)(For 12mm)
Strapping Head Unit (For TP-601B
/TP-601BP)(For 9mm)
1
Strapping Head Unit (For TP-601A,12mm)
1
1
1
1
1
1
1
1
1
1
1
Strapping Head Unit (For TP-601A, 9mm)
Cam Group
Slide Table Group
Press Group
Heater Group
Strapping Head Group (For TP-601B, TP-601BP)
Strapping Head Group (For TP-601A)
Tension Group
Feed Group (For 12mm)
Feed Group (For 9mm)
-1-
REMARKS
1
SEE PAGE 2
SEE PAGE 5
SEE PAGE 9
SEE PAGE 14
SEE PAGE 17
SEE PAGE 17
SEE PAGE 19
SEE PAGE 23
SEE PAGE 23
11/02/06
1-1
CAM GROUP
-2-
T6-1-10004
11/02/06
1-1
T6-1-10004
CAM GROUP
REF.
NO.
1
2
3
4
5
6
7
8
9
10
T6-1-10110
T6-1-10120
T6-1-10131
T6-1-10142
T6-1-10171
T6-1-10181
T6-1-10201
T6-1-11000
T6-1-12000
T6-6-10180
Tension Cam
Cam Shaft End Plate
Limit Switch Cam (LS2)
Limit Switch Cam (LS3)
Gear Box Pulley
Limit Switch Bracket
V-Belt (A25)
Gear Box
Cam Ass'y
Magnet Brake
1
1
1
1
1
1
1
1
1
1
20
21
22
23
24
25
26
27
28
29
30
KYA070720
BR6205ZZ
HBS0845H
HBS0825
HBS0612
HSS0610
PW08B
SW08
SW06
SW04
PMS0408
Key, 7x7x20
Bearing, 6205ZZ
HBS, M8x45 (H)
HBS, M8x25
HBS, M6x12
HSS, M6x10
PW, M8 (B)
SW, M8
SW, M6
SW, M4
PMS, M4x8
2
2
4
1
2
6
4
5
2
4
4
PART NO.
DESCRIPTION
-3-
Q'TY
REMARKS
SEE PAGE 4
11/02/06
CAM ASS'Y
1-1-1
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
51
52
PART NO.
DESCRIPTION
T6-1-12000
Q'TY
T6-1-12110
T6-1-12120
T6-1-12130
T6-1-12140
T6-1-12150
T6-1-12160
T6-1-12170
T6-1-12180
T6-1-12190
T6-1-12210
T6-1-12220
T6-1-12230
T6-1-12350
KYA070790
KYB070748
Slide Table Cam
RH Press Cam
Center Press Came
Heater Cam
LH Press Cam
Cam Shaft
Cam Shaft Coupling
Collar, 28.8x34x28.3
Collar, 28.8x34x21
Collar, 28.8x34x8
Collar, 28.8x34x4.5
Collar, 28.8x34x15
Collar, 28.8x34x27.8
Key, 7x7x90
Key, 7x7x48
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
HBS0620
HSS0810
HBS, M6x20
HSS, M8x10
4
1
-4-
REMARKS
11/02/06
1-2
SLIDE TABLE GROUP
-5-
T6-1-20003
11/02/06
1-2
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART NO.
T6-1-20110
T6-1-20120
T6-1-20141
T6-1-20150
T6-1-20163
T6-1-20163S
T6-1-20170
T6-1-20180
T6-1-20193
T6-1-20210
T6-1-20220
T6-1-20230
T6-1-20250
T6-1-20311
T6-1-20321
T6-1-20340
T6-1-20351
T6-1-20371
T6-1-20840
T6-1-20910
T6-1-20920
T6-1-20930
T6-1-20930S
22
23
24
T6-1-21000
T6-2-10130
TA-071
30
31
32
33
34
35
BR6304ZZ
ER15
HBS1025H
HBS0830
HBS0650H
HBS0620N
HBS0620NS
HBS0620
36
T6-1-20003
SLIDE TABLE GROUP
DESCRIPTION
Slide Table Frame
Slide Table Frame Shaft
Slide Table Back Adjuster
Slide Table Stopper
Slide Table
Slide Table (Stainless Steel Model)
Band Guide (For 12mm,9mm)
Flap Connecting Spring Bracket
S.F.S. Ass'y
End Plate
Slide Table Spring Hook
Slide Table Tension Spring
Cam Follower, KR22xLL
Support
Lever
Bracket
Spring
Spring
Detector Plate
Sensor Plate
Loop-eject Lever
Loop-eject Plate (For TP-601B/TP-601BP)
Loop-eject Plate (For TP-601B/
TP-601BP)(Stainless Steel Model)
Strap Guide Arm Ass'y
LN Bandway Stop Spring
Return Spring
Bearing, 6304ZZ
Snap Ring, E-15
HBS, M10x25 (H)
HBS, M8x30
HBS, M6x50 (H)
HBS, M6x20 (N)
HBS, M6x20 (N) (Stainless Steel Model)
HBS, M6x20
-6-
Q'TY
REMARKS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
4
4
4
SEE PAGE 8
11/02/06
1-2
REF.
NO.
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
T6-1-20003
SLIDE TABLE GROUP
PART NO.
DESCRIPTION
Q'TY
HSS0810
TMS0610
HN10
PW08A
PW06A
SW10
SW06
HBS0615
HBS0408
TMS0412
SW04
NTE04
HN06
SW03
HN03
HN04
PMS0416
PMS0412
FMS0508
FMS0508S
HSS, M8x10
TMS, M6x10
HN, M10
PW, M8 (A)
PW, M6 (A)
SW, M10
SW, M6
HBS, M6x15
HBS, M4x8
TMS, M4x12
SW, M4
NTE, M4
HN, M6
SW, M3
HN, M3
HN, M4
PMS, M4x16
PMS, M4x12
FMS, M5x8(For TP-601B/TP-601BP)
FMS, M5x8 (For TP-601B/TP-601BP)
(Stainless Steel Model)
HBS, M4x8
4
2
1
1
4
1
6
1
4
2
7
1
4
3
3
2
1
1
2
2
HBS0408
-7-
2
REMARKS
11/02/06
1-2-1
REF.
NO.
1
2
STRAP GUIDE ARM ASS'Y
PART NO.
T6-1-21000
T6-1-21002
T6-1-21110
T6-1-21111
MB2025
T6-1-21000
T6-1-21002
DESCRIPTION
Q'TY
Strap Guide Arm Ass'y (For TP-601B/BP)
Strap Guide Arm Ass'y (For TP-601A)
Strap Guide Arm (For TP-601B/BP)
Strap Guide Arm (For TP-601A)
Metal Bush, 2025
1
1
1
1
2
-8-
REMARKS
11/02/06
1-3
PRESS GROUP
-9-
T6-1-30000
11/02/06
1-3
REF.
NO.
1
2
3
4
5
6
7
PRESS GROUP
PART NO.
DESCRIPTION
T6-1-30000
Q'TY
REMARKS
T6-1-30110
T6-1-30120
T6-1-30130
T6-1-30140
T6-1-30150
T6-1-30160
T6-1-30170
Press Arm Shaft
Cutter Tension Spring Hook
Upper Roller Spring
Upper Shaft Spring Adjuster
PressTension Spring
CutterTension Spring
Press Arm End Plate
1
1
1
1
3
1
1
10
11
12
BR6304ZZ
ER15
T6-1-31000
T6-1-31000S
2
1
1
1
SEE PAGE 11
SEE PAGE 11
13
T6-1-32000
T6-1-32000S
1
1
SEE PAGE 12
SEE PAGE 12
14
15
16
17
18
19
20
21
22
T6-1-33000
HBS0620
HSS0615
TMS0610
HN08
HN06
PW08A
PW06B
SW06
Bearing, 6304ZZ
Snap Ring, E-15
RH, Block Arm Ass'y
RH, Block Arm Ass'y
(Stainless Steel Model)
Center Block Arm Ass'y
Center Block Arm Ass'y
(Stainless Steel Model)
LH, Block Arm Ass'y
HBS, M6x20
HSS, M6x15
TMS, M6x10
HN, M8
HN, M6
PW, M8 (A)
PW, M6 (B)
SW, M6
1
1
2
2
2
2
1
2
1
SEE PAGE 13
-10-
11/02/06
1-3-1
RH, BLOCK ARM ASS'Y
REF.
PART NO.
NO.
1
T6-1-31110
2
T6-1-31120
T6-1-31120S
3
T6-1-31130
4
T6-1-31140
5
BR628ZZ
6
SP0824
51
52
HBS0835H
HN10
DESCRIPTION
T6-1-31000
Q'TY
RH, Block Arm
Upper Cutter
Upper Cutter (Stainless Steel Model)
Upper Cutter Pin
RH, Block Spring
Bearing, 628ZZ
Spring Pin, 8x24
1
1
1
1
1
1
1
HBS, M8x35(H)
HN, M10
2
1
-11-
REMARKS
11/02/06
1-3-2
CENTER BLOCK ARM ASS'Y T6-1-32000
REF.
PART NO.
NO.
1
T6-1-32110
2
T6-1-32120
T6-1-32120S
3
T6-1-32130
T6-1-32130S
4
T6-1-32140
5
T6-1-32150
6
BR628ZZ
7
SP0820
8
SP0622
9
MB2025
51
52
53
54
FMS0510S
PMS0610
PW06A
SW06
DESCRIPTION
Q'TY
Center Block Arm
Universal Press
Universal Press (Stainless Steel Model)
Lower Cutter
Lower Cutter (Stainless Steel Model)
Cutter Spring Hook
LH & Center Block Spring
Bearing, 628ZZ
Spring Pin, 8x20
Spring Pin, 6x22
Metal Bush, 2025
1
1
1
1
1
1
1
1
1
1
1
FMS, M5x10 (Stainless Steel Model)
PMS, M6x10
PW, M6 (A)
SW, M6
2
1
1
1
-12-
REMARKS
11/02/06
LH, BLOCK ARM ASS'Y
1-3-3
REF.
NO.
1
2
3
4
5
6
7
PART NO.
T6-1-33110
T6-1-33120
T6-1-32150
BR628ZZ
SP0820
SP0622
MB2020
DESCRIPTION
LH, Block Arm
Left Jaw
LH & Center Block Spring
Bearing , 628ZZ
Spring Pin, 8x20
Spring Pin, 6x22
Metal Bush, 2020
-13-
T6-1-33000
Q'TY
1
1
1
1
1
1
2
REMARKS
11/02/06
1-4
HEATER GROUP
-14-
T6-1-40003
11/02/06
1-4
HEATER GROUP
REF.
PART NO.
NO.
1
T6-1-40110
T6-1-40111
2
T6-1-40120
3
T6-1-40130
4
T6-1-40140
5
T6-1-40150
6
ER15
7
T6-1-40170
DESCRIPTION
T6-1-40003
Q'TY
Heater Cover(For TP-601A)
Heater Cover(For TP-601B/BP)
Heater Crank Spring
Heater Slider Guide (L)
Heater Slider Guide (R)
Heater Crank Shaft
Snap Ring, E-15
Heater Stopper
1
1
1
1
1
1
2
1
41
42
T6-1-41000
T6-1-42000
Heater Set
Heater Crank Set
1
1
51
52
HSS0610
HBS0615
HSS, M6x10
HBS, M6x15
2
4
-15-
REMARKS
SEE PAGE 16
11/02/06
HEATER CRANK SET
1-4-2
REF.
NO.
1
2
3
4
5
6
51
PART NO.
DESCRIPTION
T6-1-42000
Q'TY
T6-1-42110
T6-1-42120
T6-1-42130
BR6304ZZ
MB2015
ER15
Heater Crank
Heater Bearing Shaft
Heater Crank Collar
Bearing, 6304ZZ
Metal Bush, 2015
Snap Ring, E-15
1
1
1
1
2
2
HN08
HN, M8
2
-16-
REMARKS
11/02/06
1-5
STRAPPING HEAD GROUP
-17-
T6-1-50004
T6-1-50005
11/02/06
1-5
STRAPPING HEAD GROUP
REF.
PART NO.
NO.
T6-1-50004
1
2
51
52
54
55
56
57
58
59
T6-1-50005
T6-1-50102
T6-1-50103
T6-1-50111
T6-1-50112
HBS0820
HBS0620
HBS0516
PW06B
PW05
SW08
PW08C
HBS0525
HN05
SW05
T6-1-50004
T6-1-50005
DESCRIPTION
Q'TY
Strapping Head Group
(For TP-601B/TP-601BP)
Strapping Head Group (For TP-601A)
Strapping Head (For TP-601B/TP-601BP
Strapping Head (For TP-601A)
Band Width Block (For TP-601A)
Band Width Block
(For TP-601B/TP-601BP)
1
HBS, M8x20
HBS, M6x20 (For TP-601A)
HBS, M5x16 (For TP-601B/BP)
PW, M6 (B) (For TP-601A)
PW, M5 (For TP-601B/BP)
SW, M8
PW, M8 (C)
HBS, M5x25 (For TP-601B/TP-601BP)
HN, M5 (For TP-601B/TP-601BP)
SW, M5 (For TP-601B/TP-601BP)
-18-
1
1
1
1
1
4
1
1
1
1
4
4
2
2
2
REMARKS
11/02/06
1-6
TENSION GROUP
-19-
T6-1-60003
11/02/06
1-6
TENSION GROUP
REF.
PART NO.
NO.
1
T6-1-60111
2
T6-1-60120
DESCRIPTION
T6-1-60003
Q'TY
Tension Arm Shaft
Tension Arm Spring
1
1
4
T6-1-60140
Tension Arm Spacer
2
6
7
8
T6-1-60160
BRHK2516
ER15
Tension Arm Spring Hook L-Type
Bearing, HK2516
Snap Ring, E-15
1
2
2
11
BRIR202517
Bearing, IR202517
2
41
42
T6-1-61001
T6-1-62000
T6-1-62000S
Tension Arm Ass'y
1
Tension Jaw Set
1
Tension Jaw Set (Stainless Steel Model) 1
53
HN08
HN, M8
2
-20-
REMARKS
SEE PAGE 21
11/02/06
TENSION ARM ASS'Y
1-6-1
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART NO.
T6-1-61110
T6-1-61120
T6-1-61130
T6-1-61140
T6-1-20250
ER06
T6-1-61170
T6-1-61180
T6-1-61190
T6-1-61200
T6-1-61210
SW06
HBS0616
HBS0630
HSS0508
T6-1-61260
HBS0510
T6-1-61280
DESCRIPTION
Tension Arm
Tension Jaw Shaft
Tension Arm Spring Hook I-Type
Tension Jaw Spring
Cam Follower, KR22xLL
Snap Ring, E-6
Spacer
Support
Lever
Bracket
Motor (M5-1)
SW, M6
HBS, M6x16
HBS, M6x30
HSS, M5x8
Cover
HBS, M5x10
Panel
-21-
T6-1-61001
Q'TY
1
1
1
1
1
1
1
1
1
1
1
9
5
1
3
1
4
1
REMARKS
11/02/06
1-6-1
REF.
NO.
19
20
21
22
TENSION ARM ASS'Y
PART NO.
DESCRIPTION
T6-1-61001
Q'TY REMARKS
T6-1-61290
T6-1-61300
T6-1-61100
T6-1-61101
Support Plate
Collar
Bracker Ass'y
Motor (M5-1) Ass'y
1
3
1
1
48
49
50
51
52
53
54
SW08
SW05
MB1504
HSS0810
HN08
SW10
HN10
SW, M8
SW, M5
Metal Bush, 1504
HSS, M8x10
HN, M8
SW, M10
HN, M10
1
2
1
2
1
1
1
56
57
HN06
THS0540
HN, M6
THS, M5x40
1
3
-22-
11/02/06
FEED GROUP
1-7
REF.
NO.
PART NO.
DESCRIPTION
T6-1-70004
T6-1-70005
Q'TY
T6-1-70004
T6-1-70005
Feed Group (For 12mm)
Feed Group (For 9mm)
1
1
1
T6-1-70112
V-Belt M-23
1
41
T6-1-71002
T6-1-71003
T6-1-72000
Feed Ass'y (For 12mm)
Feed Ass'y (For 9mm)
Upper Adjusting Weight Set
1
1
1
42
-23-
REMARKS
SEE PAGE 24
SEE PAGE 24
SEE PAGE 26
11/02/06
1-7-1
FEED ASS'Y
-24-
T6-1-71002
T6-1-71003
11/02/06
1-7-1
FEED ASS'Y
REF.
PART NO.
NO.
T6-1-71002
T6-1-71003
1
T6-1-71123
T6-1-71124
2
T6-1-71130
3
T6-1-71140
T6-1-71140S
4
T6-1-71150
5
T6-1-71160
6
T6-1-71170
T6-1-71170S
DESCRIPTION
7
T6-1-71180
T6-1-71180S
8
T6-1-71193
T6-1-71194
Feed Ass'y (For 12mm)
Feed Ass'y (For 9mm)
Upper Feed Roller (For 12mm)
Upper Feed Roller (For 9mm)
Upper Feed Roller Shaft
Feed Roller
Feed Roller (Stainless Steel Model)
Lever Holder
Feed Roller Pulley
Feed Shooter (For 12mm)
Feed Shooter (For 12mm)
(Stainless Steel Model)
Feed Shooter (For 9mm)
Feed Shooter (For 9mm)
(Stainless Steel Model)
Feed Shooter Cover
Feed Shooter Cover
(Stainless Steel Model)
Upper Feed Roller Ass'y (For 12mm)
Upper Feed Roller Ass'y (For 9mm)
13
14
15
16
17
18
BR628ZZ
BR6202ZZ
RR24
RR35
ER12
HBS0645H
HBS0645HS
HBS0615
HSS0615
HSS0610
PMS0610
PMS0610S
HN06
Bearing, 628ZZ
Bearing, 6202ZZ
Snap Ring, H-24
Snap Ring, H-35
Snap Ring, E-12
HBS, M6x45 (H)
HBS, M6x45 (H)(Stainless Steel Model)
HBS, M6x15
HSS, M6x15
HSS, M6x10
PMS, M6x10
PMS, M6x10 (Stainless Steel Model)
HN, M6
T6-1-71171
T6-1-71171S
19
20
21
22
23
-25-
T6-1-71002
T6-1-71003
Q'TY
1
1
1
1
1
1
1
1
1
1
1
1
4
2
4
1
2
2
1
1
2
2
2
2
1
1
1
1
1
1
REMARKS
11/02/06
1-7-2 UPPER ADJUSTING WEIGHT SET
REF.
NO.
1
2
3
4
51
52
53
PART NO.
DESCRIPTION
T6-1-72000
Q'TY
T6-1-72110
T6-1-72120
T6-1-72130
T6-1-72140
Upper Adjusting Base
Upper Adjusting Spring Hook
Upper Adjusting Spring Rod
Spring
1
1
1
1
HBS0512
HN06
SW05
HBS, M5x12
HN, M6
SW, M5
2
2
2
-26-
REMARKS
11/02/06
BANDWAY UNIT
2
REF.
NO.
1
PART NO.
T6-2-90002
T6-2-90004
T6-2-90005
T6-2-10002
T6-2-10005
2
T6-2-10006
T6-2-10007
T6-2-20000
T6-2-20001
T6-2-90002
T6-2-90004
T6-2-90005
DESCRIPTION
Q'TY
Bandway Unit (For TP-601B)
Bandway Unit (For TP-601BP)
Bandway Unit (For TP-601A)
Bandway Group (For TP-601B/TP-601BP)
(For 12mm)
Bandway Group (For TP-601B/TP-601BP)
(For 9mm)
1
1
1
1
SEE PAGE 28
1
SEE PAGE 28
Bandway Group (For TP-601A, 12mm)
Bandway Group (For TP-601A, 9mm)
Chute Arch Group (For TP-601A/B)
Chute Arch Group (For TP-601BP)
1
1
1
1
SEE PAGE 28
SEE PAGE 28
SEE PAGE 33
SEE PAGE 33
-27-
REMARKS
11/02/06
BANDWAY GROUP
2-1
REF.
NO.
PART NO.
T6-2-10002
1
T6-2-10005
T6-2-10006
T6-2-10007
T6-1-20180
T6-1-20182
2
3
T6-2-10130
T6-2-11000
T6-2-11001
T6-2-10002
T6-2-10005
DESCRIPTION
Q'TY
Bandway Group (For TP-601B/BP)
(For 12mm)
Bandway Group (For TP-601B/BP, 9mm)
Bandway Group (For TP-601A, 12mm)
Bandway Group (For TP-601A, 9mm)
Flap Connecting Spring Bracket
(For TP-601B/BP)
Flap Connecting Spring Bracket
(For TP-601A)
LH Bandway Stop Spring
RH Bandway Ass'y (For 12mm)
RH Bandway Ass'y (For 9mm)
1
-28-
REMARKS
1
1
1
1
1
1
1
1
SEE PAGE 30
11/02/06
2-1
BANDWAY GROUP
REF.
PART NO.
NO.
4
T6-2-11020
5
T6-2-12000
T6-2-12001
T6-2-12020
T6-2-12021
T6-2-12030
T6-2-12031
T6-2-13000
T6-2-13001
T6-2-13010
T6-2-13011
10
11
12
13
14
15
HN06
PW06A
TMS0508
TMS0608
HBS0615
HBS0650
HBS0640
DESCRIPTION
T6-2-10002
T6-2-10005
Q'TY
RH Bandway Ass'y
(For TP-601B/BP, 1250W)
LH Bandway Ass'y (For 850W, 12mm)
(For TP-601A)
LH Bandway Ass'y (For 850W, 9mm)
(For TP-601A)
LH Bandway Ass'y (For 1050W, 12mm)
(For TP-601A)
LH Bandway Ass'y (For 1050W, 9mm)
(For TP-601A)
LH Bandway Ass'y (For 1250W, 12mm)
(For TP-601A)
LH Bandway Ass'y (For 1250W, 9mm)
(For TP-601A)
LH Bandway Ass'y (For 850W, 12mm)
(For TP-601B/601BP)
LH Bandway Ass'y (For 850W, 9mm)
(For TP-601B/601BP)
LH Bandway Ass'y (For 1050W,
1250W, 12mm) (For TP-601B/601BP)
LH Bandway Ass'y (For 1050W,
1250W, 9mm) (For TP-601B/601BP)
HN, M6
PW, M6 (A)
TMS, M5x8
TMS, M6x8
HBS, M6x15
HBS, M6x50 (For TP-601B/BP)
HBS, M6x40 (For TP-601A)
-29-
REMARKS
1
1
SEE PAGE 32
1
SEE PAGE 32
1
1
1
1
1
SEE PAGE 32
1
SEE PAGE 32
1
1
3
2
1
2
1
1
1
11/02/06
RH BANDWAY ASS'Y
2-1-1
REF.
NO.
PART NO.
DESCRIPTION
T6-2-11000
T6-2-11001
Q'TY
RH Bandway Ass'y (For 12mm)
RH Bandway Ass'y (For 9mm)
RH Bandway (For 12mm)
RH Bandway (For 9mm)
4
5
6
T6-2-11000
T6-2-11001
T6-2-11110
T6-2-11111
T6-2-11120
T6-2-11121
T6-2-11130
T6-2-11131
T6-2-11140
T6-2-11150
T6-2-11160
RH Bandway Flap Pin (Rear)
RH Bandway Flap Spring
RH Bandway Flap Pin (Front)
1
1
1
1
1
1
1
1
2
2
2
10
TMS0608
TMS, M6x8
2
1
2
3
RH Bandway Rear Flap (For 12mm)
RH Bandway Rear Flap (For 9mm)
RH Bandway Front Flap (For 12mm)
RH Bandway Front Flap (For 9mm)
-30-
REMARKS
11/02/06
LH BANDWAY ASS'Y
2-1-2
REF.
NO.
PART NO.
T6-2-12000
T6-2-12001
T6-2-13000
T6-2-13001
1
T6-2-12110
T6-2-12200
T6-2-12112
T6-2-12202
T6-2-12113
T6-2-12203
DESCRIPTION
LH Bandway Ass'y (For TP-601A, 12mm)
LH Bandway Ass'y (For TP-601A, 9mm)
LH Bandway Ass'y (For TP-601B/
TP-601BP, 12mm)
LH Bandway Ass'y (For TP-601B/
TP-601BP, 9mm)
LH Bandway (For 850W, 12mm)
(For TP-601A)
LH Bandway (For 850W, 9mm)
(For TP-601A)
LH Bandway (For 1050W, 12mm)
(For TP-601A)
LH Bandway (For 1050W, 9mm)
(For TP-601A)
LH Bandway (For 1250W, 12mm)
(For TP-601A)
LH Bandway (For 1250W, 9mm)
(For TP-601A)
-31-
T6-2-12000
T6-2-13000
Q'TY
1
1
1
1
1
1
1
1
1
1
REMARKS
11/02/06
2-1-2
LH BANDWAY ASS'Y
REF.
PART NO.
NO.
T6-2-13110
T6-2-13200
T6-2-13111
T6-2-13201
2
3
4
5
T6-2-12120
T6-2-12210
T6-2-12122
T6-2-12212
T6-2-12123
T6-2-12213
T6-2-12130
T6-2-12140
T6-2-12150
DESCRIPTION
T6-2-12000
T6-2-13000
Q'TY
LH Bandway (For 850W, 12mm)
(For TP-601B/TP-601BP)
LH Bandway (For 850W, 9mm)
(For TP-601B/TP-601BP)
1
LH Bandway (For 1050, 1250W, 12mm)
1
(TP-601B/TP-601BP)
LH Bandway (For 1050, 1250W, 9mm)
(For TP-601B/TP-601BP)
LH Bandway Flap (For 850W, 12mm)
LH Bandway Flap (For 850W, 9mm)
LH Bandway Flap
(For 1050W, 12mm)
LH Bandway Flap (For 1050W, 9mm)
LH Bandway Flap (For 1250W, 12mm)
LH Bandway Flap (For 1250W, 9mm)
LH Bandway Flap Pin
(For 850W~1050W)
LH Bandway Flap Pin (For 1250W)
LH Bandway Flap Spring
(For 850W~1050W)
LH Bandway Flap Spring (For 1250W)
LH Bandway Flap Spring
-32-
1
1
1
1
1
1
1
1
2
3
1
2
1
REMARKS
11/02/06
CHUTE ARCH GROUP
2-2
REF.
NO.
1
2
7
8
9
10
11
12
PART NO.
DESCRIPTION
T6-2-20000
Q'TY
REMARKS
SEE PAGE 34
SEE PAGE 38
T6-2-20000
T6-2-20001
T6-2-21000
T6-2-22000
Chute Arch Group (For TP-601A/B)
Chute Arch Group (For TP-601BP)
Arch Ass'y (For TP-601A/B)
Arch Ass'y (For TP-601BP)
1
1
1
1
HBS0816
HBS0816S
PW08A
PW08AS
SW08
SW08S
TMS0612
TMS0612S
SW06
SW06S
PW06A
PW06AS
HBS, M8 x16
HBS, M8 x16 (Stainless Steel Model)
PW, M8 (A)
PW, M8 (A) (Stainless Steel Model)
SW, M8
SW, M8 (Stainless Steel Model)
TMS, M6x12
TMS, M6x12 (Stainless Steel Model)
SW, M6
SW, M6 (Stainless Steel Model)
PW, M6 (A)
PW, M6 (A) (Stainless Steel Model)
4
4
4
4
4
4
8
8
8
8
8
8
-33-
11/02/06
2-2-1
ARCH ASS'Y
-34-
T6-2-21000
11/02/06
2-2-1
ARCH ASS'Y
REF.
PART NO.
NO.
1
T6-2-20110
T6-2-20110S
2
3
T6-2-20120
T6-2-20130
T6-2-20130S
4
T6-2-20140
T6-2-20140S
5
T6-2-20150
T6-2-20150S
T6-2-20151
T6-2-20151S
T6-2-20152
T6-2-20152S
6
T6-2-20160
T6-2-20160S
T6-2-20161
T6-2-20161S
T6-2-20162
T6-2-20162S
T6-2-20169
T6-2-20169S
7
T6-2-20170
T6-2-20170S
T6-2-20171
T6-2-20171S
T6-2-20172
T6-2-20172S
T6-2-21000
DESCRIPTION
Q'TY
Arch Frame (For 850W x 600H)
Arch Frame (For 850W x 600H)
(Stainless Steel Model)
Arch Bandway (For 850W x 600H)
Arch Cover, Front (For 850W x 600H)
Arch Cover, Front (For 850W x 600H)
(Stainless Steel Model)
Arch Cover, Rear (For 850W x 600H)
Arch Cover, Rear (For 850W x 600H)
(Stainless Steel Model)
Upper Guide Rail (For 850W)
Upper Guide Rail (For 850W)
(Stainless Steel Model)
Upper Guide Rail (For 1050W)
Upper Guide Rail (For 1050W)
(Stainless Steel Model)
Upper Guide Rail (For 1250W)
Upper Guide Rail (For 1250W)
(Stainless Steel Model)
RH Side Guide Rail (For 600H)
RH Side Guide Rail (For 600H)
(Stainless Steel Model)
RH Side Guide Rail (For 800H)
RH Side Guide Rail (For 800H)
(Stainless Steel Model)
RH Side Guide Rail (For 1000H)
RH Side Guide Rail (For 1000H)
(Stainless Steel Model)
RH Side Guide Rail (For 400H)
RH Side Guide Rail (For 400H)
(Stainless Steel Model)
LH Side Guide Rail (For 600H)
LH Side Guide Rail (For 600H)
(Stainless Steel Model)
LH Side Guide Rail (For 800H)
LH Side Guide Rail (For 800H)
(Stainless Steel Model)
LH Side Guide Rail (For 1000H)
LH Side Guide Rail (For 1000H)
1
1
-35-
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
REMARKS
11/02/06
2-2-1
ARCH ASS'Y
REF.
PART NO.
NO.
T6-2-20179
T6-2-20179S
8
9
T6-2-20180
T6-2-20180S
T6-2-20190
T6-2-20190S
10
T6-2-20200
T6-2-20200S
11
12
13
14
15
T6-2-20210
T6-2-20220
T6-2-20230
T6-2-20240
T6-2-20340
T6-2-20340S
T6-2-20341
T6-2-20341S
T6-2-20342
T6-2-20342S
16
17
T6-2-21250
T6-2-21260
T6-2-21260S
18
T6-2-21280
T6-2-21280S
19
T6-2-21290
T6-2-21290S
20
T6-2-21350
T6-2-21350S
T6-2-21351
DESCRIPTION
(Stainless Steel Model)
LH Side Guide Rail (For 400H)
LH Side Guide Rail (For 400H)
(Stainless Steel Model)
Corner Guide Rail, Upper
Corner Guide Rail, Upper (Stainless Steel Model)
Corner Guide Rail, Lower (LH)
Corner Guide Rail, Lower (LH)
(Stainless Steel Model)
Corner Guide Rail, Lower (RH)
Corner Guide Rail, Lower (RH)
(Stainless Steel Model)
Guide Rail Hinge (1)
K-Type Guide Rail Hinge Shaft
Guide Rail Hinge (2)
Guide Rail Hinge Shaft
Back Guide Plate, Upper (For 850W)
Back Guide Plate, Upper (For 850W)
(Stainless Steel Model)
Back Guide Plate, Upper (For 1050W)
Back Guide Plate, Upper (For 1050W)
(Stainless Steel Model)
Back Guide Plate, Upper (For 1250W)
Back Guide Plate, Upper (For 1250W)
(Stainless Steel Model)
Arch Guide Rail Spring
Guiding Angle, LH Front
Guiding Angle, LH Front (Stainless Steel Model)
Guiding Angle, RH Front
Guiding Angle, RH Front
(Stainless Steel Model)
Guiding Angle, RH Rear
Guiding Angle, RH Rear
(Stainless Steel Model)
Back Guide Plate, Side (For 600H)
Back Guide Plate, Side (For 600H)
(Stainless Steel Model)
Back Guide Plate, Side (For 800H)
-36-
T6-2-21000
Q'TY
1
1
4
4
1
1
1
1
11
12
1
11
1
1
1
1
1
1
11
1
13
1
1
1
1
2
2
2
REMARKS
11/02/06
2-2-1
ARCH ASS'Y
REF.
PART NO.
NO.
T6-2-21351S
T6-2-21352
T6-2-21352S
T6-2-21359
T6-2-21359S
T6-2-21353
T6-2-21353S
DESCRIPTION
Back Guide Plate, Side (For 800H)
(Stainless Steel Model)
Back Guide Plate, Side (For 1000H)
Back Guide Plate, Side (For 1000H)
(Stainless Steel Model)
Back Guide Plate, Side (For 400H)
Back Guide Plate, Side (For 400H)
(Stainless Steel Model)
Back Guide Plate, Side (For 1200H)
Back Guide Plate, Side (For 1200H)
(Stainless Steel Model)
Back Guide Plate, Corner Upper
Back Guide Plate, Corner Upper
(Stainless Steel Model)
Back Guide Plate, LH Lower
Back Guide Plate, LH Lower
(Stainless Steel Model)
Back Guide Plate, RH Lower
Back Guide Plate, RH Lower
(Stainless Steel Model)
T6-2-21000
Q'TY
2
2
2
2
2
2
2
21
T6-2-21360
T6-2-21360S
22
T6-2-21370
T6-2-21370S
23
T6-2-21380
T6-2-21380S
28
PN04
PN04S
PN,∮4
PN,∮4 (SUS) (OPTION)
12
12
29
30
31
32
33
TMS0508S
TMS0408
HBS0440H
HN04
SW04
TMS, M5x8 (SUS)
TMS, M4x8
HBS, M4x40 (H)
HN, M4
SW, M4
8
72
1
1
1
-37-
2
2
1
1
1
1
REMARKS
11/02/06
2-2-2
ARCH ASS'Y
(For TP-601BP)
-38-
T6-2-22000
11/02/06
2-2-2
REF.
NO.
1
2
3
ARCH ASS'Y
(For TP-601BP)
PART NO.
T6-2-20110
T6-2-20120
T6-2-20150
T6-2-20150S
T6-2-20151
T6-2-20151S
T6-2-20152
T6-2-20152S
4
T6-2-20160
T6-2-20160S
T6-2-20161
T6-2-20161S
T6-2-20162
T6-2-20162S
T6-2-20169
T6-2-20169S
5
T6-2-20170
T6-2-20170S
T6-2-20171
T6-2-20171S
T6-2-20172
T6-2-20172S
T6-2-20179
T6-2-20179S
6
T6-2-20180
T6-2-20180S
DESCRIPTION
Arch Frame (For 850W x 600H)
Arch Bandway (For 850W x 600H)
Upper Guide Rail (For 850W)
Upper Guide Rail (For 850W)
(Stainless Steel Model)
Upper Guide Rail (For 1050W)
Upper Guide Rail (For 1050W)
(Stainless Steel Model)
Upper Guide Rail (For 1250W)
Upper Guide Rail (For 1250W)
(Stainless Steel Model)
RH Side Guide Rail (For 600H)
RH Side Guide Rail (For 600H)
(Stainless Steel Model)
RH Side Guide Rail (For 800H)
RH Side Guide Rail (For 800H)
(Stainless Steel Model)
RH Side Guide Rail (For 1000H)
RH Side Guide Rail (For 1000H)
(Stainless Steel Model)
RH Side Guide Rail (For 400H)
RH Side Guide Rail (For 400H)
(Stainless Steel Model)
LH Side Guide Rail (For 600H)
LH Side Guide Rail (For 600H)
(Stainless Steel Model)
LH Side Guide Rail (For 800H)
LH Side Guide Rail (For 800H)
(Stainless Steel Model)
LH Side Guide Rail (For 800H)
LH Side Guide Rail (For 1000H)
(Stainless Steel Model)
LH Side Guide Rail (For 400H)
LH Side Guide Rail (For 400H)
(Stainless Steel Model)
Corner Guide Rail, Upper
Corner Guide Rail, Upper (Stainless Steel Model)
-39-
T6-2-22000
Q'TY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
REMARKS
11/02/06
2-2-2
ARCH ASS'Y
(For TP-601BP)
REF.
PART NO.
NO.
7
T6-2-20190
T6-2-20190S
8
T6-2-20200
T6-2-20200S
9
10
11
12
13
T6-2-20210
T6-2-20220
T6-2-20230
T6-2-20240
T6-2-20340
T6-2-20340S
T6-2-20341
T6-2-20341S
T6-2-20342
T6-2-20342S
14
15
T6-2-21250
T6-2-21260
T6-2-21260S
16
T6-2-21280
T6-2-21280S
17
T6-2-21290
T6-2-21290S
T6-2-21350
T6-2-21350S
18
T6-2-21351
T6-2-21351S
T6-2-21352
T6-2-21352S
T6-2-22000
DESCRIPTION
Q'TY
Corner Guide Rail, Lower (LH)
Corner Guide Rail, Lower (LH)
(Stainless Steel Model)
Corner Guide Rail, Lower (RH)
Corner Guide Rail, Lower (RH)
(Stainless Steel Model)
Guide Rail Hinge (1)
K-Type Guide Rail Hinge Shaft
Guide Rail Hinge (2)
Guide Rail Hinge Shaft
Back Guide Plate, Upper (For 850W)
Back Guide Plate, Upper (For 850W)
(Stainless Steel Model)
Back Guide Plate, Upper (For 1050W)
Back Guide Plate, Upper (For 1050W)
(Stainless Steel Model)
Back Guide Plate, Upper (For 1250W)
Back Guide Plate, Upper (For 1250W)
(Stainless Steel Model)
Arch Guide Rail Spring
Guiding Angle, LH Front
Guiding Angle, LH Front
(Stainless Steel Model)
Guiding Angle, RH Front
Guiding Angle, RH Front
(Stainless Steel Model)
Guiding Angle, RH Rear
1
1
Guiding Angle, RH Rear (Stainless Steel Model)
Back Guide Plate, Side (For 600H)
Back Guide Plate, Side (For 600H)
(Stainless Steel Model)
Back Guide Plate, Side (For 800H)
Back Guide Plate, Side (For 800H)
(Stainless Steel Model)
Back Guide Plate, Side (For 1000H)
Back Guide Plate, Side (For 1000H)
(Stainless Steel Model)
-40-
1
1
11
12
1
11
1
1
1
1
1
1
11
1
1
1
1
1
1
2
2
2
2
2
2
REMARKS
11/02/06
2-2-2
ARCH ASS'Y
(For TP-601BP)
REF.
PART NO.
NO.
T6-2-21359
T6-2-21359S
19
T6-2-21360
T6-2-21360S
20
T6-2-21370
T6-2-21370S
21
T6-2-21380
T6-2-21380S
22
T6-2-21689
T6-2-21680
T6-2-21681
T6-2-21682
T6-2-21670
T6-2-21699
T6-2-21690
T6-2-21691
T6-2-21692
T6-2-22010
T6-2-22011
T6-2-22020
T6-2-22021
T6-2-22030
T6-2-22031
T6-2-22040
T6-2-22041
T6-5-11150
T7-5-10211
T7-5-41450
TK-035
23
24
25
26
27
28
29
30
31
32
DESCRIPTION
Back Guide Plate, Side (For 400H)
Back Guide Plate, Side (For 400H)
(Stainless Steel Model)
Back Guide Plate, Corner Upper
Back Guide Plate, Corner Upper
(Stainless Steel Model)
Back Guide Plate, LH Lower
Back Guide Plate, LH Lower
(Stainless Steel Model)
Back Guide Plate, RH Lower
Back Guide Plate, RH Lower
(Stainless Steel Model)
LH Arch Cover (For 400H)
LH Arch Cover (For 600H)
LH Arch Cover (For 800H)
LH Arch Cover (For 1000H)
Arch (For 850Wx600H)
RH Arch Cover (For 400H)
RH Arch Cover (For 600H)
RH Arch Cover (For 800H)
RH Arch Cover (For 1000H)
Satefy Mask, Front Right (For 600~1000H)
Safety Mask, Front Right (For 400H)
Safety Mask, Rear Right (For 600H~1000H)
Safety Mask, Rear Right (For 400H)
Safety Mask, Front LH (For 600H~1000H)
Safety Mask, Front LH (For 400H)
Safety Mask, Rear LH (For 600H~1000H)
Safety Mask, Rear LH (For 400H)
Table Handle
Switch Actuator-Adjustable
Hinges
Interlock Safety Switch
-41-
T6-2-22000
Q'TY
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
4
2
REMARKS
11/02/06
2-2-2
REF.
PART NO.
NO.
40 PN04
PN04S
PN04S
41 TMS0408
42 TMS0508S
43 TMS0512
44 PW05
45 SW05
46 HBS0440H
47 HN04
48 SW04
49 PW04
50 FMS0515
51 FMS0410
52 FMS0415
53 CAP05
54 FLG04
55 TMS0408
56 THS0416
57 TMS0615
ARCH ASS'Y
(For TP-601BP)
DESCRIPTION
PN,∮4
PN,∮4 (SUS) (OPTION)
PN,∮4 (Stainless Steel Model)
TMS, M4x8
TMS, M5x8 (SUS)
TMS, M5x12
PW, M5
SW, M5
HBS, M4x40 (H)
HN, M4
SW, M4
PW, M4
FMS, M5x35
FMS, M4x10
FMS, M4x20
CAP, M5
FLG, M4
TMS, M4x8
THS, M4x16
TMS, M6x15
-41-1-
T6-2-22000
Q'TY
12
12
12
72
6
8
12
12
1
1
7
6
4
8
8
4
8
8
8
4
REMARKS
11/02/06
ACCUMULATOR UNIT
3
REF.
NO.
1
2
PART NO.
T6-3-90001
T6-3-90003
T6-3-10001
T6-3-10002
T6-3-20001
T6-3-20002
T6-3-90001
T6-3-90003
DESCRIPTION
Q'TY
Accumulator Unit (For 12mm)
Accumulator Unit (For 9mm)
Accumulator Group (For 12mm)
Accumulator Group (For 9mm)
Accumulator Box Group (For 12 mm)
Accumulator Box Group (For 9mm)
1
1
1
1
1
1
-42-
REMARKS
SEE PAGE 43
SEE PAGE 43
SEE PAGE 47
SEE PAGE 47
11/02/06
3-1
ACCUMULATOR GROUP
-43-
T6-3-10001
T6-3-10002
11/02/06
3-1
ACCUMULATOR GROUP
REF.
PART NO.
NO.
T6-3-10001
T6-3-10002
1
T6-1-72140
2
T6-3-10110
T6-3-10111
3
T6-3-10120
4
T6-3-10130
T6-3-10130S
DESCRIPTION
5
6
7
8
9
10
11
T6-3-10150
T6-3-10170
T6-3-10181
T6-3-10190
T6-3-10200
T6-3-10321
T6-3-12000
T6-3-12001
Accumulator Group (For 12mm)
Accumulator Group (For 9mm)
Spring
Balance Bar (For 12mm)
Balance Bar (For 9mm)
Accumulator Balance Spring
Accumulator Adjusting Bolt
Accumulator Adjusting Bolt
(Stainless Steel Model)
Accumulator Spring Adjusting
Label (Direction)
V-Belt, M-27
Balance Bar Spacer (For 12mm)
Twist Stopper
Cover
Accumulator Ass'y (For 12mm)
Accumulator Ass'y (For 9mm)
20
HBS0620
HBS0620S
HBS0616
HBS0612
PMS0315
HN08
HN08S
HN03
PW06C
PW06CS
PW03
SW08
SW06
SW06S
PW05
SW05
HBS0510
PW06A
HBS, M6x20
HBS, M6x20 (Stainless Steel Model)
HBS, M6x16 (For 12mm)
HBS, M6x12 (For 9mm)
PMS, M3x15
HN, M8
HN, M8 (Stainless Steel Model)
HN, M3
PW, M6 (C)
PW, M6 (C)(Stainless Steel Model)
PW, M3
SW, M8
SW, M6
SW, M6 (Stainless Steel Model)
PW, M5
SW, M5
HBS, M5x10
PW, M6 (A)
21
22
23
24
25
26
27
28
29
30
31
32
-44-
T6-3-10001
T6-3-10002
Q'TY
1
1
1
1
1
1
1
1
4
4
2
2
1
3
3
1
4
4
1
1
6
6
2
2
2
2
1
1
1
1
1
1
1
1
REMARKS
SEE PAGE 45
11/02/06
3-1-1
ACCUMULATOR ASS'Y
-45-
T6-3-12000
T6-3-12001
11/02/06
3-1-1
ACCUMULATOR ASS'Y
REF.
PART NO.
NO.
T6-3-12000
T6-3-12001
1
T6-3-11110
2
T6-3-11120
3
T6-3-11130
4
T6-3-11140
5
T6-3-11150
6
T6-3-11160
T6-3-11161
7
T6-3-12170
8
T6-3-11180
9
T6-3-11190
10 T6-1-71160
11 BR6202ZZ
12 BR6201ZZ
13 BR6902ZZ
14 RR35
15 RR32
16 RR28
17 ER12
18 SR12
51
52
53
54
55
HBS0635H
HSS0615
HSS0610
HSS0506
HN06
DESCRIPTION
Accumulator Ass'y (For 12mm)
Accumulator Ass'y (For 9mm)
Accumulator Bearing Case
Accumulator Lower Shaft
Accumulator Lower Roller
Accumulator Main Roller & Shaft
Accumulator Balance Bar Holder
T6-3-12000
T6-3-12001
Q'TY
Knob
Bearing Collar
Feed Roller Pulley
Bearing, 6202ZZ
Bearing, 6201ZZ
Bearing, 6902ZZ
Snap Ring, H-35
Snap Ring, H-32
Snap Ring, H-28
Snap Ring, E-12
Stop Ring, S-12
1
1
1
1
1
1
1
1
1
1
1
2
1
4
2
2
4
2
1
3
1
HBS, M6x35 (H)
HSS, M6x15
HSS, M6x10
HSS, M5x6
HN, M6
1
1
2
1
1
Accumulator Feed Shooter (For 12mm)
Accumulator Feed Shooter (For 9mm)
Accumulator Lower Shaft Spring Hook
-46-
REMARKS
11/02/06
3-2
ACCUMULATOR BOX GROUP
-47-
T6-3-20001
T6-3-20002
11/02/06
3-2
ACCUMULATOR BOX GROUP
REF.
PART NO.
NO.
T6-3-20001
T6-3-20002
1
T6-3-20130
T6-3-20130S
2
3
T6-3-20150
T6-3-20160
8
HBS0508
HBS0508S
SW04
SW04S
PW04
PW04S
SW05
SW05S
PW05
PW05S
HBS0430H
HBS0430HS
9
10
11
12
13
DESCRIPTION
T6-3-20001
T6-3-20002
Q'TY
Accumulator Box Group (For 12mm)
Accumulator Box Group (For 9mm)
Accumulator Box Front, LH
Accumulator Box Front, LH
(Stainless Steel Model)
Spacer 9 mm
Spacer 12 mm
1
1
1
1
HBS, M5x8
HBS, M5x8 (Stainless Steel Model)
SW, M4
SW, M4 (Stainless Steel Model)
PW, M4
PW, M4 (Stainless Steel Model)
SW, M5
SW, M5 (Stainless Steel Model)
PW, M5
PW, M5 (Stainless Steel Model)
HBS, M4x30 (H)
2
2
2
2
2
2
2
2
2
2
2
2
HBS, M4x30 (H) (Stainless Steel Model)
-48-
2
2
REMARKS
11/02/06
REEL UNIT
4
REF.
NO.
1
2
PART NO.
T6-4-90000
T6-4-10000
T6-4-20000
DESCRIPTION
Reel Unit
Reel Guard Group
Reel Control Group
-49-
T6-4-90000
Q'TY
1
1
1
REMARKS
SEE PAGE 50
SEE PAGE 52
11/02/06
REEL GUARD GROUP
4-1
REF.
PART NO.
NO.
1
T6-4-11000
2
T6-4-10530
T6-4-10530S
3
T6-4-10540
T6-4-10540S
8
9
HBS1020
HBS1020S
SW10
SW10S
DESCRIPTION
T6-4-10000
Q'TY
Free Angle Bracket Holder Ass'y
Reel Guard (Front)
Reel Guard (Front) (Stainless Steel Model)
Reel Guard (Rear)
Reel Guard (Rear) (Stainless Steel Model)
1
1
1
1
1
HBS, M10x20
HBS, M10x20 (Stainless Steel Model)
SW, M10
SW, M10 (Stainless Steel Model)
4
4
4
4
-50-
REMARKS
SEE PAGE 51
11/02/06
FREE ANGLE BRACKET
4-1-1
T6-4-11000
HOLDER ASS'Y
REF.
NO.
1
2
3
4
5
10
PART NO.
DESCRIPTION
Q'TY
T6-4-11110
T6-4-11120
T6-4-11130
T6-4-11140
PN06
PN06S
Free Angle Bracket Holder
Free Angle Roller Bracket
Strap Guide Roller
Rivet, ∮6x30
PN, ∮6
PN, ∮6 (Stainless Steel Model)
1
1
1
2
2
2
HSS0610
HSS0610S
HSS, M6x10
HSS, M6x10 (Stainless Steel Model)
2
2
-51-
REMARKS
11/02/06
4-2
REEL CONTROL GROUP
-52-
T6-4-20000
11/02/06
4-2
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
30
31
32
REEL CONTROL GROUP
PART NO.
T6-4-20110
T6-4-20130
T6-4-20140
T6-4-20140S
T6-4-20150
T6-4-20150S
T6-4-20160
T6-4-20160S
T6-4-20170
T6-4-20170S
T6-4-20180
T6-4-20180S
T6-4-20190
T6-4-20260
T6-4-20270
T6-4-20270S
T6-4-20280
T6-4-20280S
T6-4-20290
T6-4-20300
T6-4-21000
T6-4-22000
T6-4-22000S
TC-013
TC-014
TC-015
TC-016
TC-020
TC-021
TC-075
TE-096
BR6205ZZ
MB1525
ER12
ER12S
DESCRIPTION
Reel Unit Base
Brake Tension Holder
Brake Belt Tightener
Brake Belt Tightener (Stainless Steel Model)
Reel Shaft
Reel Shaft (Stainless Steel Model)
Holder Shaft
Holder Shaft (Stainless Steel Model)
Reel Brake Arm
Reel Brake Arm (Stainless Steel Model)
Brake Tension Arm Spring
Brake Tension Arm Spring (Stainless Steel Model)
Brake Tension Spring Ring
Spring Hook
Set Block
Set Block (Stainless Steel Model)
Washer
Washer (Stainless Steel Model)
Collar
Collar
Brake Belt Ass'y
Free Slide Roller Set
Free Slide Roller Set (Stainless Steel Model)
Inner Flange
Outer Flange
Protector
Reel Nut Handle
Pin
Split Pin
Center Drum 280MM (OPTION)
Panel
Bearing, 6205ZZ
Metal Bush, 1525
Snap Ring, E-12
Snap Ring, E-12 (Stainless Steel Model)
-53-
T6-4-20000
Q'TY
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
5
5
REMARKS
SEE PAGE 55
SEE PAGE 56
SEE PAGE 56
11/02/06
4-2
REF.
PART NO.
NO.
33 ER19
ER19S
34 SR08
SR08S
35 HBS0625
HBS0625S
36 HBS0620
HBS0620S
37 HBS0616
HBS0616S
38 HN06
HN06S
39 SW06
SW06S
40 HSS0606
HSS0606S
41 HB0816
HB0816S
42 PW06A
PW06AS
REEL CONTROL GROUP
T6-4-20000
DESCRIPTION
Q'TY
Snap Ring, E-19
Snap Ring, E-19 (Stainless Steel Model)
Stop Ring, S-8
Stop Ring, S-8 (Stainless Steel Model)
HBS, M6x25
HBS, M6x25 (Stainless Steel Model)
HBS, M6x20
HBS, M6x20 (Stainless Steel Model)
HBS, M6x16
HBS, M6x16 (Stainless Steel Model)
HN, M6
HN, M6 (Stainless Steel Model)
SW, M6
SW, M6 (Stainless Steel Model)
HSS, M6x6
HSS, M6x6 (Stainless Steel Model)
HB, M8x16
HB, M8x16 (Stainless Steel Model)
PW, M6 (A)
PW, M6 (A) (Stainless Steel Model)
1
1
1
1
1
1
3
3
2
2
2
2
3
3
1
1
1
1
1
1
-54-
REMARKS
11/02/06
4-2-1
REF.
PART NO.
NO.
1
T6-4-21110
T6-4-21110S
2
T6-4-21120
3
T6-4-21130
10
11
12
PMS0420
PW04
HN04
BRAKE BELT ASS'Y
T6-4-21000
DESCRIPTION
Q'TY
Brake Belt Holder
Brake Belt Holder (Stainless Steel Model)
Brake Holder Plate
Brake V-Belt
1
1
1
1
PMS, M4x20
PW, M4
HN, M4
2
2
2
-55-
REMARKS
11/02/06
4-2-2
FREE SLIDE ROLLER SET T6-4-22000
REF.
PART NO.
NO.
1
T6-4-22110
T6-4-22110S
2
3
4
TE-028
T6-4-11140
T6-4-11140S
PN06
PN06S
DESCRIPTION
Free Slide Roller Bracket
Free Slide Roller Bracket
(Stainless Steel Model)
Roller
Rivet, ∮6x30
Rivet, ∮6x30 (Stainless Steel Model)
PN, ∮6
PN, ∮6 (Stainless Steel Model)
-56-
Q'TY
1
1
1
1
1
1
1
REMARKS
11/02/06
BODY UNIT
5
REF.
NO.
1
2
PART NO.
T6-5-90008
T6-5-90009
T6-5-50001
T6-5-50004
T6-5-50005
T6-5-50002
T6-5-50006
T6-5-50007
T6-5-50003
T6-5-50008
T6-5-50009
DESCRIPTION
Body Unit (For TP-601A)
Body Unit (For TP-601B/BP)
Body Group (For TP-601A, 850W)
Body Group (For TP-601A, 1050W)
Body Group (For TP-601A, 1250W)
Body Group (For TP-601B, 850W)
Body Group (For TP-601B, 1050W)
Body Group (For TP-601B, 1250W)
Body Group (For TP-601BP, 850W)
Body Group (For TP-601BP, 1050W)
Body Group (For TP-601BP, 1250W)
-57-
T6-5-90008
T6-5-90009
Q'TY
1
1
1
1
1
1
1
1
1
1
1
REMARKS
SEE PAGE 58
SEE PAGE 58
SEE PAGE 58
SEE PAGE 63
SEE PAGE 63
SEE PAGE 63
SEE PAGE 63
SEE PAGE 63
SEE PAGE 63
11/02/06
5-4
BODY GROUP
(For TP-601A)
-58-
T6-5-50001
11/02/06
5-4
BODY GROUP
(For TP-601A)
REF.
PART NO.
NO.
1 T6-5-10160
2
T6-5-10170
T6-5-10170S
T6-5-50170
T6-5-50170S
3
T6-5-10191
T6-5-10191S
T6-5-50190
T6-5-50190S
4
5
6
7
8
9
10
11
12
13
T6-5-10230
T6-5-10232
T6-5-10260
T6-5-10280
T6-5-10281
T6-5-10301
T6-5-10310
T6-5-10310S
T6-5-10320
T6-5-10320S
T6-5-10332
T6-5-10332S
T6-5-10911
T6-5-10911S
T6-1-20940
T6-1-20940S
T6-1-20950
T6-1-20950S
T6-1-20951
T6-1-20951S
DESCRIPTION
Magnet Catch
Enclosed Bottom Plate (For 850W)
Enclosed Bottom Plate (For 850W)
(Stainless Steel Model)
Enclosed Bottom Plate (For 1050W,
1250W)
Enclosed Bottom Plate (For 1050W,
1250W)(Stainless Steel Model)
Rear Plate (For 850W)
Rear Plate (For 850W)
(Stainless Steel Model)
Rear Plate (For 1050W, 1250W)
Rear Plate (For 1050W, 1250W)
(Stainless Steel Model)
Caster (Free)
Caster (Free)(Stainless Steel Model)
Cover
Support Bolt
Support Bolt (Stainless Steel Model)
Photo Eye
Block
Block (Stainless Steel Model)
Support
Support (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Cover
Cover (Stainless Steel Model)
Loop-Eject Plate (For 850W, 9mm)
Loop-Eject Plate (For 850W, 9mm)
(Stainless Steel Model)
Loop-Eject Plate (For 850W,12mm)
Loop-Eject Plate (For 850W,12mm)
(Stainless Steel Model)
-59-
T6-5-50001
Q'TY REMARKS
2
1
1
1
1
1
1
1
1
4
4
1
4
4
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
11/02/06
5-4
BODY GROUP
(For TP-601A)
REF.
PART NO.
NO.
T6-1-20952
T6-1-20952S
DESCRIPTION
Loop-Eject Plate (For 1050W,
1250W, 9mm)
Loop-Eject Plate (For 1050W,
T6-5-50001
Q'TY REMARKS
1
1
1250W, 9mm) (Stainless Steel Model)
T6-1-20953
T6-1-20953S
14
15
T6-5-50121
T6-5-50122
T6-5-50131
T6-5-50131S
T6-5-50132
T6-5-50132S
16
17
18
19
20
21
22
T6-5-50242
T6-5-50342
T6-5-50342S
T6-5-50343
T6-5-50343S
T6-5-50345
T6-5-50345S
T6-5-50350
T6-5-50350S
T6-5-50361
T6-5-50361S
T6-5-50371
T6-5-50371S
T6-5-50381
T6-5-50511
T6-5-50511S
T6-5-50521
T6-5-50521S
Loop-Eject Plate
(For 1050W,1250W, 12mm)
Loop-Eject Plate
(For 1050W,1250W, 12mm)
Front Door (For 850W)
Front Door (For 1050W, 1250W)
Front Door Handle (For 850W)
Front Door Handle (For 850W)
(Stainless Steel Model)
Front Door Handle (For 1050W,
1250W)
Front Door Handle (For 1050W,
1250W) (Stainless Steel Model)
Control Plate
Cover (For 850W)
Cover (For 850W)(Stainless Steel Model)
Cover (For 1050W)
Cover (For 1050W)(Stainless Steel Model)
Cover (For 1250W)
Cover (For 1250W)(Stainless Steel Model)
Cover
Cover (Stainless Steel Model)
Cover
Cover (Stainless Steel Model)
Cover
Cover (Stainless Steel Model)
Support
Body Frame (For 850W)
Body Frame (For 850W)
(Stainless Steel Model)
Body Frame (For 1050W)
Body Frame (For 1050W)
(Stainless Steel Model)
-60-
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
11/02/06
5-4
BODY GROUP
(For TP-601A)
REF.
PART NO.
NO.
T6-5-50523
T6-5-50523S
DESCRIPTION
27
T6-5-50980
T6-5-50980S
28
T6-5-50960
Body Frame (For 1250W)
Body Frame (For 1250W)
(Stainless Steel Model)
Cover (For 850W)
Cover (For 1050W)
Cover (For 1250W)
Sensor Label
Sensor Label
Sensor Plate (Front)
Sensor Plate (Front)
(Stainless Steel Model)
Sensor Plate (Rear)
Sensor Plate (Rear)
(Stainless Steel Model)
Photo Eye Ass'y
33
CAP5/8
CAP5/8S
FMS0508S
TMS0508S
FMS0410S
TMS0308
TMS0508
TMS0508S
HB0616
HB0616S
PW05
HN04
HN04S
SW06
SW06S
TMS0408
TMS0408S
CAP, 5/8"
CAP, 5/8" (Stainless Steel Model)
FMS, M5x8 (SUS)
TMS, M5x8 (SUS)
FMS, M4x10 (SUS)
TMS, M3x8
TMS, M5x8
TMS, M5x8 (Stainless Steel Model)
HB, M6x16
HB, M6x16 (Stainless Steel Model)
PW, M5
HN, M4
HN, M4 (Stainless Steel Model)
SW, M6
SW, M6 (Stainless Steel Model)
TMS, M4x8
TMS, M4x8 (Stainless Steel Model)
23
24
25
26
34
35
36
37
38
39
40
41
42
43
T6-5-50530
T6-5-50531
T6-5-50532
T6-5-50540
T6-5-50550
T6-5-50970
T6-5-50970S
-61-
T6-5-50001
Q'TY REMARKS
1
1
1
1
1
1
1
1
1
1
1
2
4
4
12
3
6
4
9
9
16
16
2
12
12
16
16
8
8
11/02/06
5-4
BODY GROUP
(For TP-601A)
REF.
PART NO.
NO.
44 PW06C
PW06CS
45 HN5/8
HN16S
46 TMS0608
47 HBS0816
48 HSS0610
HSS0610S
49 HSS0508
HSS0508S
50
51
52
53
54
55
56
57
SW04
SW04S
TMS0612
TMS0612S
SW08
TMS0512
SW05
HN05
TMS0506
TMS0506S
HBS0610
DESCRIPTION
PW, M6 (C)
PW, M6 (C)(Stainless Steel Model)
HN, 5/8"
HN, M16 (Stainless Steel Model)
TMS, M6x8
HBS, M8x16
HSS, M6x10
HSS, M6x10 (Stainless Steel Model)
HSS, M5x8
HSS, M5x8 (Stainless Steel Model)
SW, M4
SW, M4 (Stainless Steel Model)
TMS, M6x12
T6-5-50001
Q'TY REMARKS
16
16
4
4
4
2
4
4
2
2
12
12
8
TMS, M6x12 (Stainless Steel Model)
8
SW, M8
2
TMS, M5x12
1
SW, M5
2
HN, M5
1
TMS, M5x6
16
TMS, M5x6 (Stainless Steel Model) 16
HBS, M6x10
1
-62-
11/02/06
5-5
BODY GROUP
(For TP-601B, TP-601BP)
-63-
T6-5-50002
T6-5-50003
11/02/06
5-5
BODY GROUP
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
T6-5-50002
T6-5-50003
1
T6-5-10122
T6-5-10122S
T6-5-10124
T6-5-10124S
2
T6-5-10130
T6-5-10130S
T6-5-50130
T6-5-50130S
3
4
T6-5-10160
T6-5-10170
T6-5-10170S
T6-5-50170
T6-5-50170S
5
6
7
8
9
10
11
12
13
T6-5-10191
T6-5-50190
T6-5-10230
T6-5-10232
T6-5-10260
T6-5-10280
T6-5-10281
T6-5-10301
T6-5-10310
T6-5-10310S
T6-5-10320
T6-5-10320S
T6-5-10332
T6-5-10332S
T6-5-10911
T6-5-50002
T6-5-50003
DESCRIPTION
Q'TY
Body Group (For TP-601B)
Body Group (For TP-601BP)
Front Door (For 850W, 1250W)
Front Door (For 850W, 1250W)
(Stainless Steel Model)
Front Door (For 1050W)
Front Door (For 1050W)
(Stainless Steel Model)
Front Door Handle
(For 850W, 1250W)
Front Door Handle (For 850W, 1250W)
(Stainless Steel Model)
Front Door Handle (For 1050W)
Front Door Handle (For 1050W)
(Stainless Steel Model)
Magnet Catch
Enclosed Bottom Plate (For 850W,
1250W)
Enclosed Bottom Plate (For 850W,
1250W) (Stainless Steel Model)
Enclosed Bottom Plate (For 1050W)
Enclosed Bottom Plate (For 1050W)
(Stainless Steel Model)
Rear Plate (For 850W, 1250W)
Rear Plate (For 1050W)
Caster (Free)
Caster (Free)(Stainless Steel Model)
Cover
Support Bolt
Support Bolt (Stainless Steel Model)
Photo Eye
Block
Block (Stainless Steel Model)
Support
Support (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Bracket
1
1
1
1
-64-
1
1
1
1
1
1
2
1
1
1
1
1
4
4
1
4
4
2
2
2
2
2
1
1
1
REMARKS
11/02/06
5-5
BODY GROUP
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
14 T6-5-13340
T6-5-13340S
15
16
T6-5-50242
T6-5-50242S
T6-5-50340
T6-5-50340S
T6-5-50341
T6-5-50341S
T6-5-50344
T6-5-50344S
17
T6-5-50350
T6-5-50350S
T6-5-50351
T6-5-50351S
18
19
T6-5-50360
T6-5-50360S
T6-5-50362
T6-5-50362S
T6-5-50370
T6-5-50370S
T6-5-50372
T6-5-50372S
20
21
22
T6-5-50380
T6-5-50380S
T6-5-50400
T6-5-50510
T6-5-50510S
T6-5-50520
DESCRIPTION
Bracket (For TP-601BP)
Bracket (For TP-601BP)
(Stainless Steel Model)
Control Plate
Control Plate (Stainless Steel Model)
Cover (For 850W)
Cover (For 850W)
(Stainless Steel Model)
Cover (For 1050W)
Cover (For 1050W)
(Stainless Steel Model)
Cover(For 1250W)
Cover(For 1250W)
(Stainless Steel Model)
Cover (For TP-601B)
Cover (For TP-601B)
(Stainless Steel Model)
Cover (For TP-601BP)
Cover (For TP-601BP)
(Stainless Steel Model)
Cover (For TP-601B)
Cover (For TP-601B) (Stainless Steel Model)
Cover (For TP-601BP)
Cover (For TP-601BP) (Stainless Steel Model)
Cover (For TP-601B)
Cover (For TP-601B)
(Stainless Steel Model)
Cover (For TP-601BP)
(Stainless Steel Model)
Cover (For TP-601BP)
(Stainless Steel Model)
Support
Support (Stainless Steel Model)
Guide (For 1050W)
Body Frame (For 850W)
Body Frame (For 850W)
(Stainless Steel Model)
Body Frame (For 1050W)
-65-
T6-5-50002
T6-5-50003
Q'TY REMARKS
2
1
1
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
11/02/06
5-5
BODY GROUP
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
T6-5-50520S
T6-5-50560
T6-5-50560S
23
24
25
T6-5-50540
T6-5-50550
T6-5-50551
T6-5-50970
T6-5-50970S
T6-5-50971
T6-5-50971S
26
T6-5-50980
T6-5-50980S
T6-5-50981
T6-5-50981S
27
28
T6-5-50960
T6-5-50570
T6-5-50570S
32
CAP5/8
CAP5/8S
FMS0410S
TMS0308
PW04
TMS0508
TMS0508S
HB0616
HB0616S
PW05
PW05S
HN04
HN04S
SW06
33
34
35
36
37
38
39
40
DESCRIPTION
Body Frame (For 1050W)
(Stainless Steel Model)
Body Frame (For 1250W)
Body Frame (For 1250W)
(Stainless Steel Model)
Sensor Label
Sensor Label (For TP-601B)
Sensor Label (For TP-601BP)
Sensor Plate (Front) (For TP-601B)
Sensor Plate (Front) (For TP-601B)
(Stainless Steel Model)
Sensor Plate (Front) (For TP-601BP)
Sensor Plate (Front) (For TP-601BP)
(Stainless Steel Model)
Sensor Plate (Rear) (For TP-601B)
Sensor Plate (Rear) (For TP-601B)
(Stainless Steel Model)
Sensor Plate (Rear) (For TP-601BP)
Sensor Plate (Rear) (For TP-601BP)
(Stainless Steel Model)
Photo Eye Ass'y
Bracket (For TP-601BP)
Bracket (For TP-601BP)
(Stainless Steel Model)
CAP, 5/8"
CAP, 5/8" (Stainless Steel Model)
FMS, M4x10 (SUS)
TMS, M3x8
PW, M4
TMS, M5x8
TMS, M5x8 (Stainless Steel Model)
HB, M6x16
HB, M6x16 (Stainless Steel Model)
PW, M5
PW, M5(Stainless Steel Model)
HN, M4
HN, M4 (Stainless Steel Model)
SW, M6
-66-
T6-5-50002
T6-5-50003
Q'TY REMARKS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
3
4
4
6
4
3
9
9
16
16
12
12
10
10
16
11/02/06
5-5
REF.
PART NO.
NO.
SW06S
41 TMS0408
TMS0408S
42 HBS0616
43 PW06C
PW06CS
44 HN5/8
HN16S
45 TMS0608
TMS0608S
46 HBS0816
HBS0816S
47 HSS0610
HSS0610S
48 HSS0508
HSS0508S
49 SW04
SW04S
50 TMS0612
51 SW08
52 HN08
53 HBS0860H
54 HBS0850H
55 TMS0512
56 SW05
SW05S
57 HN05
HN05S
58 TMS0506
TMS0506S
59 HBS0516
HBS0516S
60 HBS0512
HBS0512S
61 THS0516
62 TMS0516
BODY GROUP
(For TP-601B, TP-601BP)
DESCRIPTION
T6-5-50002
T6-5-50003
Q'TY REMARKS
SW, M6 (Stainless Steel Model)
16
TMS, M4x8
9
TMS, M4x8 (Stainless Steel Model) 9
HBS, M6x16
4
PW, M6 (C)
16
PW, M6 (C)(Stainless Steel Model) 16
HN, 5/8"
4
HN, M16 (SUS)
4
TMS, M6x8
4
TMS, M6x8 (Stainless Steel Model) 4
HBS, M8x16
2
HBS, M8x16 (Stainless Steel Model)
2
HSS, M6x10
4
HSS, M6x10 (Stainless Steel Model)
4
2
HSS, M5x8 (Stainless Steel Model) 2
SW, M4
13
SW, M4 (Stainless Steel Model)
13
TMS, M6x12
8
SW, M8
10
HN, M8
8
HBS, M8x60 (H)
4
HBS, M8x50 (H)
4
TMS, M5x12
1
SW, M5
12
SW, M5 (Stainless Steel Model)
12
HN, M5
2
HN, M5 (Stainless Steel Model)
2
TMS, M5x6
14
TMS, M5x6 (Stainless Steel Model) 14
HBS, M5x16
4
HBS, M5x16 (Stainless Steel Model) 4
HBS, M5x12
6
HBS, M5x12 (Stainless Steel Model) 6
THS, M5x16
1
TMS, M5x16
2
-67-
11/02/06
6
ELECTRIC CONTROL UNIT
REF.
PART NO.
NO.
1
T6-6-10020
2
T6-6-70001
T6-6-70002
T6-6-90007
DESCRIPTION
Q'TY
Electric Group (For 3PH, 220V)
Control Group
Control Group (OPTION For SIEMENS
PLC)
1
1
1
-68-
REMARKS
SEE PAGE 69
SEE PAGE 72
SEE PAGE 75
11/02/06
6-1
ELECTRIC GROUP
-69-
T6-6-10020
11/02/06
6-1
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
ELECTRIC GROUP
T6-6-10020
PART NO.
DESCRIPTION
Q'TY
TF-021-1
TF-024
TF-025
TF-027
TG-013
T5-4-10221
T5-4-10231
T5-4-10310
T6-1-43002
Fan (For 220V/230V/240V)
Transformer Cover
Knob
Selector Switch
Fuse Holder
Knob
Variable Resistor (5K)(∮3)
Earth Plate (5P)
Smoke-Exhaustion System, without
activated carbon filter.(For TP-601A)
Feed Roller Pulley
Heater Terminal Bracket
Cap Tire
Cap Tire (For CSA)
Heater Transformer Ass'y
Limit Switch Base
Smoke Fan Bracket
Smoke Fan Box
Nipple
Heater Terminal
Grommet (PG13.5)
Limit Switch (LS4)
Heater Transformer
Motor (For M1/M2/M3, 3PH, 220V)
Counter (OPTION)
Fan (For Smoke, OPTION)
Grommet (PG11)
Panel
Motor (M1) Pulley
Motor (M2) Pulley
Earth Plate (3P)
Transformer Box Cover
Transformer Box
Fuse 15A
Main Power Switch
1
1
1
1
1
1
1
1
1
T6-1-71160
T6-6-10140
T6-6-10161
T6-6-10166
T6-6-10171
T6-6-10200
T6-6-10260
T6-6-10270
T6-6-10280
T6-6-10320
T6-6-10340
T6-6-10380
T6-6-10391
T6-6-10442
T6-6-10530
T6-6-10971
T6-6-10980
T6-6-10990
T6-6-30002
T6-6-30136
T6-6-30200
T6-6-40002
T6-6-40006
T6-6-40007
T6-6-40010
-70-
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
3
1
1
1
1
1
1
1
1
REMARKS
11/02/06
6-1
ELECTRIC GROUP
REF.
PART NO.
NO.
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
HBS0510
HBS0512
PMS0410
HSS0610
HBS0620
TMS0408
TMS0508
PMS0315
HN06
HN03
PW06C
PW05
PW04
SW05
SW06
SW03
SW04
HN04
DESCRIPTION
HBS, M5x10
HBS, M5x12
PMS, M4x10
HSS, M6x10
HBS, M6x20
TMS, M4x8
TMS, M5x8
PMS, M3x15
HN, M6
HN, M3
PW, M6 (C)
PW, M5
PW, M4
SW, M5
SW, M6
SW, M3
SW, M4
HN, M4
T6-6-10020
Q'TY
4
1
2
4
12
17
2
2
12
2
24
4
8
3
12
2
4
4
-71-
REMARKS
11/02/06
6-2
CONTROL GROUP
-72-
T6-6-70001
T6-6-70003
11/02/06
6-2
REF.
PART NO.
NO.
T6-6-70001
T6-6-70003
1
T6-6-60110
T6-6-60110S
2
T6-6-60120
T6-6-60120S
3
T6-6-60130
T6-6-60130S
4
T6-6-60140
5
T6-6-70150
6
T6-6-70161
7
T6-6-30041
8
T6-6-70181
T6-6-70182
9
T6-6-70190
10 T6-6-70201
T6-6-70202
T6-6-70203
T6-6-70205
11 T5-4-10231
12 T5-4-10221
13 T6-6-30031
14 T6-6-30036
15 T6-6-30034
16 T5-4-10160
17 T6-6-30047
18 PW04
19 PW06C
PW06C
20 SW06
SW06
21 PW04
22 HN04
23 HN06
24 PMS0305
25 PMS0312
26 PMS0412
CONTROL GROUP
DESCRIPTION
Control Group (For TP-601A/B)
Control Group (For TP-601BP)
Control Box
Control Box (Stainless Steel Model)
Control Box Door
Control Box Door (Stainless Steel Model)
Pin
Pin (Stainless Steel Model)
Door Lock
Plate
Panel
Transformer
P.C.Board (For TP-601A/B)
P.C.Board (For TP-601BP)
Terminal
P.C.Board (For TP-601A/TP-601B, 50HZ)
P.C.Board (For TP-601A/TP-601B, 60HZ)
P.C.Board (For TP-601BP, 50HZ)
P.C.Board (For TP-601BP, 60HZ)
Variable Resistor (5K)
Knob
Fuse (2A)
Fuse (1A)
Fuse (7A)
Fuse Holder
EMI Filter
PW, M4
PW, M6 (C)
PW, M6 ( C ) (For CSA)
SW, M6
SW, M6 (For CSA)
PW, M4
HN, M4
HN, M6
PMS, M3x5
PMS, M3x12
PMS, M4x12
-73-
T6-6-70001
T6-6-70003
Q'TY
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
3
6
1
2
8
2
4
2
2
4
4
10
2
2
REMARKS
11/02/06
6-2
REF.
NO.
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
CONTROL GROUP
PART NO.
TMS0608
HBS0616
HBS0612
T6-8-21452
T6-8-21453
T6-8-21454
T6-8-20470
T6-8-20480
T6-1-50680
T6-8-20510
T6-8-20520
T6-6-50260
T6-8-20530
T6-1-10680
TF-015
T6-8-20560
T6-8-20570
T6-6-70491
T6-6-70501
T6-6-70510
T6-6-70520
T6-6-70530
T6-6-70541
T6-6-70542
T6-8-21290
T6-6-10350
TMS0308
T6-6-10250
T6-6-30200
TMS0412
PMS0310
PMS0320
SW03
PMS0325
HBS0408
T6-8-21300
DESCRIPTION
TMS, M6x8
HBS, M6x16
HBS, M6x12
Wire Ass'y X1 (For Motor M1)
Wire Ass'y X2 (For Motor M2)
Wire Ass'y X3 (For Motor M3)
Wire Ass'y X4 (For Motor M5)
Wire Ass'y X5 (For Motor M5-1)
Proximity Sensor (For LS6, SFS)
Wire Ass'y X8 (For Control Panel)
Wire Ass'y X9 (For LS4, LS5 )
Over Load Relay (For CSA)
Wire Ass'y X10 (For T1)
Proximity Sensor (For LS2, LS3)
Terminal Bracket (For CSA)
Wire Ass'y X13 (For Weld Cooling Time)
Wire Ass'y X14 (For BRK)
Wire Ass'y X15-1 (For Photo Eye 1)
Wire Ass'y X15-2 (For Photo Eye 2)
Wire Ass'y X16 (For Control Plate)
Wire Ass'y X18 (For Conveyor Brake
& Clutch)
Wire Ass'y X19 (For Conveyor Motor)
CPU (For TP-601A/B )
CPU (For TP-601BP )
Transformer (For 380V/415V)
Connector (For Conveyor Singnal)
TMS, M3x8
Earth Plate (6P)
Earth Plate (3P)
TMS, M4x12
PMS, M3x10
PMS, M3x20
SW, M3
PMS, M3x25
HBS, M4x8 (For CSA)
Transformer Cover (For CSA)
-74-
T6-6-70001
T6-6-70003
Q'TY
4
4
1
1
1
1
1
1
2
1
1
4
1
2
4
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
2
4
8
2
8
1
REMARKS
SEE PAGE 5
SEE PAGE 2
SEE PAGE 5
SEE PAGE 2
SEE PAGE 2, 5
SEE PAGE 5
11/02/06
6-2
REF.
NO.
62
63
64
65
66
67
CONTROL GROUP
T6-6-70001
T6-6-70003
PART NO.
DESCRIPTION
Q'TY
T6-7-70290
T6-8-21457
T6-8-21458
T6-8-21459
T6-8-21460
HBS0610
Holder (For CSA)
Wire Ass'y F10 (For Motor M1, CSA)
Wire Ass'y F11 (For Motor M2, CSA)
Wire Ass'y F12 (For Motor M3, CSA)
1
1
1
1
1
2
Wire Ass'y F13 (For Conveyor Motor, CSA )
HBS, M6x10 (For CSA)
-74-1-
REMARKS
11/02/06
6-3
CONTOL GROUP
(OPTION For SIEMENS PLC )
-75-
T6-6-70002
11/02/06
6-3
CONTROL GROUP
T6-6-70002
(OPTION For SIEMENS PLC )
REF.
PART NO.
NO.
1
T6-6-60110
T6-6-60110S
2
T6-6-60120
T6-6-60120S
3
T6-6-60130
T6-6-60130S
4
T6-6-60140
5
T7-5-20210
6
T6-6-60151
7
T7-6-11780
8
T6-6-70170
9
T5-4-10232
T5-4-10232
10 T5-4-10222
T5-4-10222
11 T6-6-10460
12 T7-6-10600
13 T7-6-11650
14 T7-6-11680
15 T7-6-11692
16 T7-6-11700
17 TT-5-10181
18 T7-6-10701
19 T7-6-10690
T7-6-10690
20 T7-6-10990
T7-6-10990
21 T7-6-10390
22 T7-6-10820
T7-6-10820
23 T7-6-10660
T7-6-10660
24 T7-6-10680
T7-6-10680
25 T6-6-50280
26 T6-6-50290
27 T7-6-10290
DESCRIPTION
Control Box
Control Box (Stainless Steel Model)
Control Box Door
Control Box Door (Stainless Steel Model)
Pin
Pin (Stainless Steel Model)
Door Lock
Rubber Plug
Plate (PLC)
Control Plate
Panel (PLC)
Variable Resistor (∮6.0)
Variable Resistor (∮6.0) (Option For Transit Speed)
Knob (Hole ∮6.0)
Knob (Hole ∮6.0) (Option For Transit Speed)
Snap Switch (For TP-601BP)
PCB Support
PCB (For M5/M5-1, Y1/Y2/Y3)
CPU (A1)
Expansion I/O (A2)
Modules D/A (A3)
Power Supply
Frequency Inverter (Option For Transit Speed)
Magnetic Switch
Magnetic Switch (Option For Transit Speed)
Over Relay
Over Relay (Option For Transit Speed)
PCB (For Sensor)
Relay Socket
Relay Socket (Option For Press Bar)
Relay
Relay (Option For Press Bar)
Diode
Diode (Option For Press Bar)
Fuse (5A)
Fuse (2A)
Fuse (3A)
-76-
Q'TY
1
1
1
1
2
2
1
2
1
1
1
2
3
2
3
1
1
1
1
1
1
1
1
5
4
4
3
2
3
4
3
4
3
4
6
2
2
REMARKS
11/02/06
6-3
CONTROL GROUP
T6-6-70002
(OPTION For SIEMENS PLC )
REF.
PART NO.
NO.
T7-6-10290
28 T6-6-50180
T6-6-50180
29 T6-6-50330
30 T7-6-10630
31 T7-6-11720
DESCRIPTION
Q'TY
Fuse (3A) (Option For Transit Speed)
Fuse Holder
Fuse Holder (Option For Transit Speed)
End Plate (Fuse)
End Plate
Jumper (Terminal 3S)
4
5
6
1
1
3
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
T6-6-10350
T6-6-10980
WD45450470
WD25450275
WD45450300
T7-6-11172
T7-6-11181
T7-6-11193
T6-1-10680
T6-6-10380
TF-007
T6-8-20522
WD25450300
T6-1-50680
T7-6-11330
T7-6-11370
T6-5-10301
T7-6-10940
T6-8-21290
T6-8-21300
Connector (For Conveyor Signal)
Grommet (PG11)
Wire Duct 45x45x470
Wire Duct 25x45x275
Wire Duct 45x45x300
Output Wire For M4 P.C.B
Power Wire For M4 P.C.B
Control Wire For M4 P.C.B
Proximity Sensor (LS2, LS3)
Limit Switch (LS4)
Micro Switch (LS5)
Wire Ass'y (For LS4, LS5)
Wire Duct 25x45x300
Proximity Sensor (SFS, LS6)
Control Wire For Sensor
Jumper (Fuse Holder)
Photo Eye (PH1, PH2)
Terminal
Transformer
Transformer Cover
2
2
1
2
1
1
1
1
2
1
1
2
1
2
2
1
2
25
1
1
56
PW04
PW04
HBS0616
PW06C
SW06
HN06
HBS0608N
PMS0308
TMS0308
TMS0512
TMS0412
PW, M6
PW, M6 (OPTION)
HBS, M6x16
PW, M6 (C)
SW, M6
HN, M6
HBS, M6x8 (N)
PMS, M3x8
TMS, M3x8
TMS, M5x12
TMS, M4x12
4
4
4
8
4
4
8
12
8
2
3
57
58
59
60
61
62
63
64
65
-77-
REMARKS
11/02/06
TRANSMISSION GROUP
7
REF.
NO.
PART NO.
1
2
3
T6-7-90003
T6-7-90004
T6-7-40000
T6-7-40001
T6-7-50000
4
T6-7-50001
5
T6-7-60000
T6-7-90003
T6-7-90004
DESCRIPTION
Q'TY
Table Roller Ass'y (For TP-601A)
Table Belt Ass'y (For TP-601B/BP)
Table Roller Ass'y (Front)(For TP-601A)
Table Roller Ass'y (Rear) (For TP-601A)
Table Belt Ass'y (Front) (For TP-601B/
TP-601BP)
Table Belt Ass'y (Rear) (For TP-601B/
TP-601BP)
Transmission Ass'y
1
1
1
1
1
SEE PAGE 79
SEE PAGE 83
SEE PAGE 87
1
SEE PAGE 91
1
SEE PAGE 95
-78-
REMARKS
11/02/06
7-1
TABLE ROLLER ASS'Y (FRONT) T6-7-40000
(For TP-601A)
-79-
11/02/06
7-1
TABLE ROLLER ASS'Y (FRONT)
(For TP-601A)
REF.
PART NO.
NO.
1
T6-7-40110
T6-7-40110S
T6-7-40111
T6-7-40111S
2
T6-7-40130
T6-7-40130S
T6-7-40131
T6-7-40131S
3
4
5
6
7
8
9
10
11
12
13
T6-7-40140
T6-7-40140S
T6-7-40141
T6-7-40141S
T6-7-40150
T6-7-40150S
T6-7-40160
T6-7-40160S
T6-7-40170
T6-7-40170S
T6-7-40171
T6-7-40171S
T6-7-40180
T6-7-40180S
T6-7-40181
T6-7-40181S
T6-7-40190
T6-7-40190S
T6-7-40210
T6-7-40210S
T6-7-40220
T6-7-40230
T6-7-40230S
T6-7-40260
T6-7-40270
DESCRIPTION
Table Roller (For 850W)
Table Roller (For 850W) (Stainless Steel Model)
Table Roller (For 1050,1250W)
Table Roller (For 1050,1250W)
(Stainless Steel Model)
Table Roller (For 850W)
Table Roller (For 850W)
(Stainless Steel Model)
Table Roller (For 1050,1250W)
Table Roller (For 1050,1250W)
(Stainless Steel Model)
Table Roller (For 850W)
Table Roller (For 850W)(Stainless Steel Model)
Table Roller (For 1050,1250W)
Table Roller (For 1050,1250W)
(Stainless Steel Model)
Table Roller
Table Roller (Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Shaft (For 850W)
Shaft (For 850W)(Stainless Steel Model)
Shaft (For 1050,1250W)
Shaft (For 1050,1250W)(Stainless Steel Model)
Shaft (For 850W)
Shaft (For 850W)(Stainless Steel Model)
Shaft (For 1050,1250W)
Shaft (For 1050,1250W)(Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Support
Table Handle
Table Handle (Stainless Steel Model)
Bracket
Bracket
-80-
T6-7-40000
Q'TY
1
1
1
1
2
2
2
2
2
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
2
2
2
2
1
2
2
1
1
REMARKS
11/02/06
7-1
TABLE ROLLER ASS'Y (FRONT)
(For TP-601A)
REF.
PART NO.
NO.
14 T6-7-40280
15 T6-7-40310
T6-7-40310S
16 T6-7-40330
T6-7-40330S
17 T6-7-40580
T6-7-40580S
18 T6-7-50520
T6-7-50520S
19 T6-7-50530
20 T6-7-50540
T6-7-50540S
21 T6-7-50740
T6-7-50740S
22
23
24
25
26
T6-7-70180
T6-7-70180S
T6-7-70190
T6-7-70210
T6-7-70210S
T6-7-70270
T6-7-70270S
T6-5-11120
T6-5-11121
27
T6-5-11130
T6-5-11131
31
32
33
34
35
36
ER10
HBS0635
HBS0610
MB1015
RR42
HBS0616
DESCRIPTION
Bracket
Bracket
Bracket (Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Support
Support (Stainless Steel Model)
Spacer
Spacer (Stainless Steel Model)
Pulley
Spacer
Spacer (Stainless Steel Model)
Upper Table Front (For 1250W)
Upper Table Front (For 1250W)
(Stainless Steel Model)
Plunger
Plunger (Stainless Steel Model)
Roller
Spring
Spring (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Table Roller (For 1250W)
Table Roller (For 1250W)
(Stainless Steel Model)
Table Roller Shaft (For 1250W)
Table Roller Shaft (For 1250W)
(Stainless Steel Model)
Snap Ring, E-10
HBS, M6x35
HBS, M6x10
Metal Bush, 1015
Snap Ring, H-42
HBS, M6x16
-81-
T6-7-40000
Q'TY
1
1
1
1
1
1
1
2
2
1
1
1
1
1
8
8
8
8
8
8
8
3
3
3
3
8
4
4
8
2
4
REMARKS
11/02/06
7-1
REF.
NO.
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
TABLE ROLLER ASS'Y (FRONT)
(For TP-601A)
PART NO.
SR10
HSS0506
PW08A
PW06A
PW05
SW08
SW06
SW04
HN08
KYA060625
ER07S
BR6004 2RS
HBS0512
BR608 2RS
HBS0650
BR6200 2RS
RR22
DESCRIPTION
Stop Ring, S-10
HSS, M5x6
PW, M8 (A)
PW, M6 (A)
PW, M5
SW, M8
SW, M6
SW, M4
HN, M8
Key, 6x6x25
Snap Ring, E-7 (SUS)
Bearing, 6004 2RS
HBS, M5x12
Bearing, 608 2RS
HBS, M6x50
Bearing, 6200 2RS
Snap Ring, H-22
-82-
T6-7-40000
Q'TY
12
2
24
12
2
4
16
2
8
1
8
4
2
16
4
12
8
REMARKS
11/02/06
7-2
TABLE ROLLER ASS'Y (REAR)
(For TP-601A)
-83-
T6-7-40001
11/02/06
7-2
TABLE ROLLER ASS'Y (REAR)
(For TP-601A)
REF.
PART NO.
NO.
1
T6-7-40110
T6-7-40110S
T6-7-40111
T6-7-40111S
2
T6-7-40130
T6-7-40130S
T6-7-40131
T6-7-40131S
3
T6-7-40140
T6-7-40140S
T6-7-40141
T6-7-40141S
4
T6-7-40170
T6-7-40170S
T6-7-40171
T6-7-40171S
5
6
7
8
9
10
11
12
T6-7-40260
T6-7-40280
T6-7-40350
T6-7-40350S
T6-7-40360
T6-7-40370
T6-7-40380
T6-7-40410
T6-7-40420
T6-7-40420S
T6-7-40421
T6-7-40421S
DESCRIPTION
Table Roller (For 850W)
Table Roller (For 850W)
(Stainless Steel Model)
Table Roller (For 1050W, 1250W)
Table Roller (For 1050W, 1250W)
(Stainless Steel Model)
Table Roller (For 850W)
Table Roller (For 850W)
(Stainless Steel Model)
Table Roller (For 1050W, 1250W)
Table Roller (For 1050W, 1250W)
(Stainless Steel Model)
Table Roller (For 850W)
Table Roller (For 850W)
(Stainless Steel Model)
Table Roller (For 1050W, 1250W)
Table Roller (For 1050W, 1250W)
(Stainless Steel Model)
Shaft (For 850W)
Shaft (For 850W)
(Stainless Steel Model)
Shaft (For 1050W, 1250W)
Shaft (For 1050W, 1250W)
(Stainless Steel Model)
Bracket
Bracket
Support
Support (Stainless Steel Model)
Bracket
Bracket
Support
Bracket
Shaft (For 850W)
Shaft (For 850W)
(Stainless Steel Model)
Shaft (For 1050W, 1250W)
Shaft (For 1050W,1250W)
(Stainless Steel Model)
-84-
T6-7-40001
Q'TY
1
1
1
1
1
1
1
1
3
3
3
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
REMARKS
11/02/06
7-2
TABLE ROLLER ASS'Y (REAR)
(For TP-601A)
REF.
PART NO.
NO.
13 T6-7-40430
T6-7-40430S
14 T6-7-40440
T6-7-40440S
15 T6-7-40450
T6-7-40450S
16 T6-7-40460
T6-7-40460S
17 T6-7-40470
T6-7-40470S
18 T6-7-40480
T6-7-40480S
T6-7-40481
T6-7-40481S
19
20
21
22
23
24
25
26
27
28
29
T6-7-40490
T6-7-40490S
T6-7-40491
T6-7-40491S
T6-7-40520
T6-7-40530
T6-7-40530S
T6-7-40540
T6-7-40540S
T6-7-40550
T6-7-40550S
T6-7-40560
T6-7-40560S
T6-7-50520
T6-7-50520S
T6-7-50530
T6-7-50540
T6-7-50540S
T6-7-50750
T6-7-50750S
T6-7-70180
DESCRIPTION
Shaft
Shaft (Stainless Steel Model)
Table Roller
Table Roller (Stainless Steel Model)
Table Roller
Table Roller (Stainless Steel Model)
Table Roller
Table Roller (Stainless Steel Model)
Table Roller
Table Roller (Stainless Steel Model)
Shaft (For 850W)
Shaft (For 850W) (Stainless Steel Model)
Shaft (For 1050W, 1250W)
Shaft (For 1050W, 1250W)
(Stainless Steel Model)
Shaft (For 850W)
Shaft (For 850W) (Stainless Steel Model)
Shaft (For 1050W)
Shaft (For 1050W)(Stainless Steel Model)
Bracket
Table Handle
Table Handle (Stainless Steel Model)
Support
Support (Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Spacer
Spacer (Stainless Steel Model)
Pulley
Spacer
Spacer (Stainless Steel Model)
Upper Table Front (For 1250W)
Upper Table Front (For 1250W)
(Stainless Steel Model)
Plunger
-85-
T6-7-40001
Q'TY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
2
2
1
1
1
1
1
8
REMARKS
11/02/06
7-2
TABLE ROLLER ASS'Y (REAR)
(For TP-601A)
REF.
PART NO.
NO.
T6-7-70180S
30 T6-7-70190
31 T6-7-70210
T6-7-70210S
32 T6-7-70270
T6-7-70270S
33 MB1015
34 RR42
35 SR10
36 ER10
37 HBS0635
38 HBS0610
39 HBS0616
40 BR6004 2RS
41 TMS0325
42 HB0616
43 PW08A
44 PW06A
45 BR608 2RS
46 SW06
47 HN03
48 HN08
49 HSS0506
50 KYA060625
51 HSS0508
52 BR6200 2RS
53 ER07S
54 HBS0510
55 SW05
56 HBS0650
57 T6-5-11120
T6-5-11121
58
T6-5-11130
T6-5-11131
59
RR22
DESCRIPTION
Plunger (Stainless Steel Model)
Roller
Spring
Spring (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Metal Bush, 1015
Snap Ring, H-42
Stop Ring, S-10
Snap Ring, E-10
HBS, M6x35
HBS, M6x10
HBS, M6x16
Bearing, 6004 2RS
TMS, M3x25
HB, M6x16
PW, M8 (A)
PW, M6 (A)
Bearing, 608 2RS
SW, M6
HN, M3
HN, M8
HSS, M5x6
Key, 6x6x25
HSS, M5x8
Bearing, 6200 2RS
Snap Ring, E-7 (SUS)
HBS, M5x10
SW, M5
HBS, M6x50
Table Roller (For 1250W)
Table Roller (For 1250W)
(Stainless Steel Model)
Table Roller Shaft (For 1250W)
Table Roller Shaft (For 1250W)
(Stainless Steel Model)
Snap Ring, H-22
-86-
T6-7-40001
Q'TY
8
8
8
8
8
8
8
2
14
8
4
4
2
4
4
2
24
8
16
20
4
4
2
1
1
16
8
2
2
8
3
3
3
3
8
REMARKS
11/02/06
7-3
TABLE BELT ASS'Y, FRONT SET
(For TP-601B, TP-601BP)
-87-
T6-7-50000
11/02/06
7-3
TABLE BELT ASS'Y, FRONT SET
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
1
T6-7-50410
T6-7-50410S
T6-7-50411
T6-7-50411S
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
T6-7-50420
T6-7-50430
T6-7-50430S
T6-7-50440
T6-7-50440S
T6-7-50450
T6-7-50461
T6-7-50471
T6-7-50471S
T6-7-50483
T6-7-50491
T6-7-50491S
T6-7-50500
T6-7-50500S
T6-7-50501
T6-7-50501S
T6-7-50513
T6-7-50522
T6-7-50522S
T6-7-50530
T6-7-50541
T6-7-50541S
T6-7-50551
T6-7-50560
T6-7-50560S
T6-7-50570
T6-7-50570S
T6-7-50580
T6-7-50580S
T6-7-50000
DESCRIPTION
Q'TY
Upper Table Front (For 850W,1250W)
Upper Table Front (For 850W,1250W)
(Stainless Steel Model)
Upper Table Front (For 1050W)
Upper Table Front (For 1050W)
(Stainless Steel Model)
Bracket
Roller
Roller (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Bracket
Bracket
Spacer
Spacer (Stainless Steel Model)
Bracket
Cover
Cover (Stainless Steel Model)
Shaft (For 850W,1250W)
Shaft (For 850W,1250W)
(Stainless Steel Model)
Shaft (For 1050W)
1
1
Shaft (For 1050W) (Stainless Steel Model)
Bracket
Spacer
Spacer (Stainless Steel Model)
Pulley
Spacer
Spacer (Stainless Steel Model)
Bracket
Roller
Roller (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
-88-
1
1
4
4
4
4
4
4
1
1
1
1
5
5
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
2
2
REMARKS
11/02/06
7-3
TABLE BELT ASS'Y, FRONT SET
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
19 T6-7-50590
T6-7-50590S
T6-7-50591
T6-7-50591S
20 T6-7-50601
21 T6-7-50610
22 BR6902 2RS
23 BR698 2RS
24 BR2204 2RS
25 SR15
26 SR8
27 HSS0506
28 FMS0620
FMS0620S
29 FMS0516
FMS0516S
30 HBS0512
HBS0512S
31 HBS0540
HBS0540S
32 HBS0635
HBS0635S
33 HBS0665H
HBS0665HS
34 KYA060625
35 SW05
SW05S
36 SW06
SW06S
37 PW06C
PW06CS
38 T6-7-50740
T6-7-50740S
39
T6-7-50730
T6-7-50730S
DESCRIPTION
Shaft (For 850W,1250W)
T6-7-50000
Q'TY REMARKS
1
Shaft (For 850W,1250W) (Stainless Steel Model)
1
Shaft (For 1050W)
1
Shaft (For 1050W) (Stainless Steel Model) 1
Bracket
3
Free Passage Conveyor Belt
4
Bearing, 6902 2RS
8
Bearing, 698 2RS
8
Bearing, 2204 2RS
4
Stop Ring, S-15
8
Stop Ring, S-8
8
HSS, M5x6
1
FMS, M6x20
10
FMS, M6x20 (Stainless Steel Model)
10
FMS, M5x16
16
FMS, M5x16 (Stainless Steel Model)
16
HBS, M5x12
20
HBS, M5x12 (Stainless Steel Model)
20
HBS, M5x40
8
HBS, M5x40 (Stainless Steel Model)
8
HBS, M6x35
4
HBS, M6x35 (Stainless Steel Model)
4
HBS, M6x65 (H)
2
HBS, M6x65 (H) (Stainless Steel Model)
2
Key, 6x6x25
1
SW, M5
20
SW, M5 (Stainless Steel Model)
20
SW, M6
4
SW, M6 (Stainless Steel Model)
4
PW, M6 (C)
4
PW, M6 (C) (Stainless Steel Model)
4
Upper Table Front (For 1250W)
1
Upper Table Front (For 1250W)
1
(Stainless Steel Model)
Upper Table Rear (For 1250W)
1
Upper Table Rear (For 1250W)
1
(Stainless Steel Model)
-89-
11/02/06
7-3
TABLE BELT ASS'Y, FRONT SET
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
40 PW05
PW05S
41 T6-5-11120
T6-5-11121
42
T6-5-11130
T6-5-11131
43
ER07S
DESCRIPTION
PW, M5
PW, M5
Table Roller (For 1250W)
Table Roller (For 1250W)
(Stainless Steel Model)
Table Roller Shaft (For 1250W)
Table Roller Shaft (For 1250W)
(Stainless Steel Model)
Snap Ring, E-7 (For 1250W) (SUS)
-90-
T6-7-50000
Q'TY REMARKS
20
20
6
6
6
6
12
11/02/06
7-4
TABLE BELT ASS'Y, REAR SET
(For TP-601B, TP-601BP)
-91-
T6-7-50001
11/02/06
7-4
TABLE BELT ASS'Y, REAR SET
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
1
T6-7-50112
T6-7-50113
2
T6-7-50420
3
T6-7-50430
4
T6-7-50440
T6-7-50440S
5
T6-7-50450
6
T6-7-50461
7
T6-7-50471
T6-7-50471S
8
T6-7-50483
9
T6-7-50491
T6-7-50491S
10 T6-7-50400
T6-7-50400S
11
12
13
14
15
16
17
18
19
T6-7-50401
T6-7-50401S
T6-7-50513
T6-7-50522
T6-7-50522S
T6-7-50530
T6-7-50541
T6-7-50541S
T6-7-50551
T6-7-50560
T6-7-50570
T6-7-50570S
T6-7-50580
T6-7-50580S
T6-7-50590
T6-7-50590S
T6-7-50591
T6-7-50591S
DESCRIPTION
Upper Table Rear (850W, 1250W)
Upper Table Rear (For 1050W)
Bracket
Roller
Shaft
Shaft (Stainless Steel Model)
Bracket
Bracket
Spacer
Spacer (Stainless Steel Model)
Bracket
Cover
Cover (Stainless Steel Model)
Shaft (For 850W,1250W)
Shaft (For 850W,1250W)
(Stainless Steel Model)
Shaft (For 1050W)
Shaft (For 1050W) (Stainless Steel Model)
Bracket
Spacer
Spacer (Stainless Steel Model)
Pulley
Spacer
Spacer (Stainless Steel Model)
Bracket
Roller
Shaft
Shaft (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Shaft (For 850W,1250W)
Shaft (For 850W,1250W)
(Stainless Steel Model)
Shaft (For 1050W)
Shaft (For 1050W)
(Stainless Steel Model)
-92-
T6-7-50001
Q'TY
1
1
4
2
2
2
4
1
1
1
1
5
5
1
1
1
1
1
1
1
1
1
1
1
4
1
1
2
2
1
1
1
1
REMARKS
11/02/06
7-4
TABLE BELT ASS'Y, REAR SET
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
20 T6-7-50601
21 T6-7-50710
T6-7-50710S
22 T6-7-50720
T6-7-50720S
23 T6-7-50610
24 T6-7-50340
25 T6-7-50750
T6-7-50750S
26
T6-7-50730
T6-7-50730S
27
T6-7-50120
T6-7-50120S
30
31
32
33
34
35
36
BR6902 2RS
BR698 2RS
BR2204 2RS
SR15
SR8
HSS0506
FMS0620
FMS0620S
FMS0516
HBS0516
HBS0516S
HBS0540
HBS0540S
HBS0665H
HBS0665SH
HBS0635
HBS0635S
SW05
SW05S
37
38
39
40
41
42
DESCRIPTION
T6-7-50001
Q'TY
Bracket
Roller
Roller (Stainless Steel Model)
Shaft
Shaft (Stainless Steel Model)
Free passage conveyor Belt
Free passage conveyor Belt
Upper Table Front (For 1250W)
Upper Table Front (For 1250W)
(Stainless Steel Model)
Upper Table Rear (For 1250W)
Upper Table Rear (For 1250W)
(Stainless Steel Model)
Bracket (For TP-601B)
Bracket (For TP-601B)
(Stainless Steel Model)
3
2
2
2
2
2
2
1
1
Bearing, 6902 2RS
Bearing, 698 2RS
Bearing, 2204 2RS
Stop Ring, S-15
Stop Ring, S-8
HSS, M5x6
FMS, M6x20
FMS, M6x20 (Stainless Steel Model)
FMS, M5x16
HBS, M5x16
HBS, M5x16 (Stainless Steel Model)
HBS, M5x40
HBS, M5x40 (Stainless Steel Model)
HBS, M6x65 (H)
HBS, M6x65 (Stainless Steel Model) (H)
HBS, M6x35
HBS, M6x35 (Stainless Steel Model)
SW, M5
SW, M5 (Stainless Steel Model)
8
8
4
8
8
1
10
10
16
20
20
8
8
2
2
4
4
20
20
-93-
1
1
1
1
REMARKS
11/02/06
7-4
TABLE BELT ASS'Y, REAR SET
(For TP-601B, TP-601BP)
REF.
PART NO.
NO.
43 SW06
SW06S
44 HN05
HN05S
45 PW06C
46 KYA060625
47 PW05
PW05S
48 T6-5-11120
T6-5-11121
49
50
51
52
T6-5-11130
T6-5-11131
ER07S
HBS0416
HBS0416S
SW04
T6-7-50001
DESCRIPTION
Q'TY
SW, M6
SW, M6 (Stainless Steel Model)
HN, M5
HN, M5 (Stainless Steel Model)
PW, M6 (C)
Key, 6x6x25
PW, M5
PW, M5 (Stainless Steel Model)
Table Roller (For 1250W)
Table Roller (For 1250W)
(Stainless Steel Model)
Table Roller Shaft (For 1250W)
Table Roller Shaft (SUS) (For 1250W)
Snap Ring, E-7 (For 1250W) (SUS)
HBS, M4x16 (For TP-601B)
HBS, M4x16 (For TP-601B)
(Stainless Steel Model)
SW, M4
4
4
8
8
4
1
20
20
6
6
-94-
6
6
12
2
2
2
REMARKS
11/02/06
7-5
TRANSMISSION ASS'Y
-95-
T6-7-60000
11/02/06
7-5
REF.
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
TRANSMISSION ASS'Y
PART NO.
T6-1-10200
T6-6-10442
T6-6-30002
T6-7-20140
T6-7-20150
T6-7-20160
T6-7-20180
T6-7-60110
T6-7-60190
T6-7-60200
T6-7-60200S
T6-7-60211
T6-7-60220
T6-7-60220S
T6-7-60230
T6-7-60231
T6-7-60240
BR6900ZZ
SR10
HBS0612
HBS0615
HBS0620
HBS0840
HB1035
HSS0608
HSS0610
SW06
SW08
SW10
PW06C
PW08C
PW10
HN06
HN08
HN10
KYA050530
KYA050535
DESCRIPTION
V-Belt (A26)
Motor (For M4, 220V)
Motor (M1) Pulley (For 1Phase)
Gear Box
Clutch Set
Brake Set
Bearing Set
Pulley
Pulley
Shaft
Shaft (Stainless Steel Model)
Tension Pulley
Tension Pulley Bracket
Tension Pulley Bracket
(Stainless Steel Model)
Belt (For TP-601B)
Belt (For TP-601A)
Belt
Bearing, 6900ZZ
Stop Ring, S-10
HBS, M6x12
HBS, M6x15
HBS, M6x20
HBS, M8x40
HB, M10x35
HSS, M6x8
HSS, M6x10
SW, M6
SW, M8
SW, M10
PW, M6 ( C )
PW, M8 ( C )
PW, M10
HN, M6
HN, M8
HN, M10
Key, 5x5x30
Key, 5x5x35
-96-
T6-7-60000
Q'TY
1
1
1
1
1
1
2
1
2
1
1
4
4
4
1
1
1
8
4
8
1
4
4
4
2
7
13
4
4
17
8
8
4
4
4
2
1
REMARKS
11/02/06
AUTO STRAP FEEDING UNIT
8
REF.
NO.
1
2
PART NO.
T6-8-90003
T6-8-90004
T6-8-10000
T6-8-10001
T6-8-50001
T6-8-90003
T6-8-90004
DESCRIPTION
Q'TY
REMARKS
Auto Strap Feeding Unit (For 9mm)
Auto Strap Feeding Unit (For 12mm)
Auto Strap Feeding Group (For 9mm)
Auto Strap Feeding Group (For 12mm)
Electric Group
1
1
1
1
1
SEE PAGE 98
SEE PAGE 98
SEE PAGE 101
-97-
11/02/06
8-1
AUTO STRAP FEEDING GROUP
-98-
T6-8-10000
T6-8-10001
11/02/06
8-1
AUTO STRAP FEEDING GROUP
REF.
PART NO.
NO.
T6-8-10000
T6-8-10001
1
T6-1-61210
2
T6-8-10110
3
T6-8-10120
4
T6-8-10130
5
T6-8-10140
T6-8-10141
6
T6-8-10150
T6-8-10151
7
T6-8-10160
T6-8-10161
8
T6-8-10180
T6-8-10181
9
T6-8-10190
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
DESCRIPTION
T6-8-10000
T6-8-10001
Q'TY REMARKS
Auto Strap Feeding Group (For 9mm)
Auto Strap Feeding Group (For 12mm)
Motor (M5)
Feed Unit Guide
Guide Cover
Feed Shooter
Strap Guide (For 12mm)
Strap Guide (For 9mm)
Strap Guide (For 12mm)
Strap Guide (For 9mm)
Control Lever (For 12mm)
Control Lever (For 9mm)
Strap Guide (For 12mm)
Strap Guide (For 9mm)
Accumulator Cover
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
T6-8-10190S
Accumulator Cover (Stainless Steel Model)
1
T6-8-10210
T6-8-10210S
T6-8-10410
T7-3-10720
TF-007
HBS0516
HBS0510
HBS0508
HBS0508S
HBS0416
TMS0508
PMS0320
HSS0406
FMS0310
SW05
SW05S
SW04
SW03
PW05
PW05S
PW04
Bracket
Bracket (Stainless Steel Model)
Motor Cover
Panel
Micro Switch
HBS, M5x16
HBS, M5x10
HBS, M5x8
HBS, M5x8 (Stainless Steel Model)
HBS, M4x16
TMS, M5x8
PMS, M3x20
HSS, M4x6
FMS, M3x10
SW, M5
SW, M5 (Stainless Steel Model)
SW, M4
SW, M3
PW, M5
PW, M5 (Stainless Steel Model)
PW, M4
-99-
1
1
1
1
1
5
2
10
10
2
2
2
2
4
17
17
5
2
16
16
2
11/02/06
8-1
REF.
NO.
27
28
29
AUTO STRAP FEEDING GROUP
PART NO.
PW03
HN03
HBS0408
DESCRIPTION
PW, M3
HN, M3
HBS, M4x8
T6-8-10000
T6-8-10001
Q'TY REMARKS
2
2
1
-100-
11/02/06
8-5
REF.
PART NO.
NO.
1
T5-4-10221
T5-4-10222
2
T5-4-10231
T5-4-10232
3
T6-5-50242
T6-5-50242S
4
T6-6-10301
T6-6-10570
5
T6-6-30009
6
7
T6-6-40015
8
T6-8-40180
9
T6-8-50161
ELECTRIC GROUP
DESCRIPTION
Knob (∮3.0)
Knob (∮6.0)
Variable Resistor (5K) (∮3.0)
Variable Resistor (5K) (∮6.0)
Control Plate
Control Plate (Stainless Steel Model)
Start Switch
Selector Switch
Stop Switch
Reset Switch
Lamp
Control Panel
-101-
T6-8-50001
Q'TY
1
1
1
1
1
1
1
2
1
1
1
1
REMARKS
11/02/06
9
REF.
PART NO.
NO.
1
T6-9-50000
2
T6-9-60000
T6-9-60001
T6-9-60002
T6-9-60003
PNEUMATIC UNIT
(For TP-601BP)
DESCRIPTION
PRESS BAR
PNEUMATIC
PNEUMATIC
PNEUMATIC
PNEUMATIC
PARTS (For 400H)
PARTS (For 600H)
PARTS (For 800H)
PARTS (For 1000H)
-102-
T6-9-90001
Q'TY
REMARKS
1
SEE PAGE 103
1
1
1
SEE PAGE 106
SEE PAGE 106
SEE PAGE 106
SEE PAGE 106
11/02/06
9-1
PRESS BAR
(For TP-601BP)
-103-
T6-9-50000
11/02/06
9-1
PRESS BAR
(For TP-601BP)
REF.
PART NO.
NO.
1
T6-9-50030
T6-9-50030S
2
T6-9-50070
T6-9-50071
T6-9-50072
3
T6-9-50080
T6-9-50080S
T6-9-50081
T6-9-50081S
T6-9-50082
T6-9-50082S
T6-9-50083
T6-9-50083S
4
T6-9-50090
T6-9-50090S
5
T6-9-50100
T6-9-50100S
6
T6-9-50110
T6-9-50000
DESCRIPTION
Q'TY
Bracket
Bracket (Stainless Steel Model)
Press Bar (For 850W)
Press Bar (For 1050W)
Press Bar (For 1250W)
Shaft (For 600H)
Shaft (For 600H) (Stainless Steel Model)
Shaft (For 800H)
Shaft (For 800H)(Stainless Steel Model)
Shaft (For 1000H)
2
2
1
1
1
2
2
2
2
2
2
2
2
2
2
1
1
2
3
2
3
2
3
1
2
2
2
4
24
2
4
2
4
32
Shaft (For 1000H)(Stainless Steel Model)
7
T6-9-50120
8
T6-9-50130
9
10
11
12
T6-9-50140
T7-8-10390
T7-8-10400
T7-8-10430
Shaft (For 400H)
Shaft (For 400H)(Stainless Steel Model)
Bracket
Bracket (Stainless Steel Model)
Cylinder Bracket
Cylinder Bracket (Stainless Steel Model)
Press Bar Absober Plate (For 850W)
Press Bar Absober Plate (For 1250W)
Press Bar Absober (For 850W)
Press Bar Absober (For 1250W)
Press Bar Absober Ass'y (For 850W)
Press Bar Absober Ass'y (For 1250W)
Swivel Joint
Press Bar Absober Plate (For 1050W)
Press Bar Absober (For 1050W)
Press Bar Absober Ass'y (For 1050W)
16
17
18
19
20
21
22
MB2030
THS0616N
HN12
HN06
HN16
HBS0620
PW06A
Metal Bush, 2030
THS, M6x16 (N)
HN, M12
HN, M6
HN, M16
HBS, M6x20
PW, M6 (A)
-104-
REMARKS
11/02/06
9-1
REF.
NO.
23
24
25
26
27
28
PRESS BAR
(For TP-601BP)
PART NO.
SW06
HBS0816
PW08A
SW08
HBS0640
PW10
DESCRIPTION
SW, M6
HBS, M8x16
PW, M8 (A)
SW, M8
HBS, M6x40
PW, M10
T6-9-50000
Q'TY
28
5
5
5
4
2
-105-
REMARKS
11/02/06
9-2
PNEUMATIC PARTS
(For TP-601BP)
-106-
T6-9-60000
11/02/06
9-2
REF.
PART NO.
NO.
1
T6-9-50060
T6-9-50061
T6-9-50062
T6-9-50063
2
PU081830
3
PU041900
4
PU080190
5
PU080800
6
T6-9-60040
7
T7-8-30160
8
T7-8-30170
9
T7-8-30180
10 T7-8-30190
11 T7-8-30200
12 T7-8-30261
13 T7-8-30270
14 T7-8-30321
15 T7-8-30331
16 T7-8-30332
17 T7-8-30341
18 T7-8-30351
19 T7-8-30370
20 T7-8-30501
21 T7-8-30510
22 T7-8-30520
23 T7-8-30610
24 T7-8-30620
25 T7-8-30630
26 T7-8-30640
PNEUMATIC PARTS
(For TP-601BP)
DESCRIPTION
Cylinder (For 600H)
Cylinder (For 800H)
Cylinder (For 1000H)
Cylinder (For 400H)
PU Tubing, (For 850Wx600H)
PU Tubing, (For 850Wx600H)
PU Tubing, (For 850x600H)
PU Tubing, (For 850x600H)
Quick Coupler (Male), 1/4" Ass'y
Tube Fitting-Elbow, ∮8-38"
Air F.R.R Units
Pressure Switch
Tube Fitting-Elbow, ∮8-1/4"
Tube Fitting-Straight, ∮4-1/4"
Solenoid Valve
Tube Fitting-Elbow, ∮4-M5
Quick Exhaust Valve
Tube Fitting-Straight, 3/8"-3/8'
Tube Fitting-Straight, 1/4"x1/4'
Control Valve, 3/8"
Resin Silencer, 3/8"
Quick Coupler (Female), 6.5x10
Tube Fitting-Elbow, 1/4"
Tube Fitting-Straight, 1/4x2'
Tube Fitting
Air F.R.R Units Ass'y
Solenoid Valve Ass'y
Control Valve Ass'y
Control Valve Ass'y
-107-
T6-9-60000
Q'TY
REMARKS
1
1
1
1
2
1
1
1
1
3
1
1
4
1
1
1
2
2
1
2
3
1
2
1
1
1
1
1
1
11/2006