Download Scope Cleaner S20 - G-Flex

Contents:
1. Safety Instructions
2. Intended use and purpose
3. Using the equipment for the first time
4. Operating the SCOPE-CLEANER S20
5. Service and maintenance
6. Error and warning messages
7. Troubleshooting
8. Technical specifications
Appendix I:
Appendix II:
Appendix III:
Appendix IV:
Appendix V:
Appendix VI:
Connecting an endoscope
Accessories
Replacement parts
Maintenance and cleaning requirements
Service Logbook
Reprocessing instructions
Read the operating instructions
Read the operating instructions before using the SCOPE-CLEANER S20 for the first
time and familiarize yourself with the functions and mode of operation of the unit and
accessories.
Failure to comply with these operating instructions may result in injury to patients,
users and maintenance personnel, and may also result in damage to the unit or
endoscope, or the unit and endoscope may stop working completely.
Store the operating instructions near the unit so that all users have access to the
instructions at all times.
Technical modifications
G-Flex Europe SPRL reserves the right to modify and upgrade the unit without prior
notice. Illustrations and descriptions in this manual, therefore, may differ from the
actual unit.
Accessories
Special accessories, as listed in Appendix II of this manual, are required to operate
the SCOPE-CLEANER S20 in line with its intended purpose.
Creation Date:
Current Name:
G-Flex Europe S.P.R.L. | 20, Rue de l’industrie 1400 Nivelles - Belgium
Phone: +32(0)67.88.36.65 | Fax: +32(0)67.88.36.88 | Email: [email protected] | Website: www.g-flex.com
US Commercial Office Only: G-Flex USA, Inc., 74 Southwood Pkwy Suite 600 Atlanta, GA 30354 – USA
18/10/13
IFU-ScopeCleanerS20.doc
This document is only controlled in electronic format by the QM.
Page:
Version:
3 of 87
7