Download MAINTENANCE INTERVALS - Safety

89
Maintenance Section
Every 50 Service Hours or Weekly
Every 50 Service Hours or Weekly
You must read and understand the warnings and
instructions contained in the Safety Section of this
manual, before performing any operation or
maintenance procedures.
Tires
Steer Cylinder Ends
Lubricate Fittings
Wipe all fittings before lubricating.
Check Inflation Pressure
There is a grease fitting for each end of each steer
cylinder for a total of four fittings.
Inflate the tires, if necessary.
For normal operating conditions, inflate the tires to:
• CS-531/533C - 110 kPa (16 psi)
• CP-533C - 83 kPa (12 psi)
Refer to the Tire Inflation Information section of this
manual.