1
Download Service Manual Outline
Transcript
MANUAL STARTER 5. Install starter handle on new rope cut to a length of 66 in. (1676 mm). Tie a knot into end of rope. Place knot into recess of rope retainer. Install rope retainer into starter handle. a b c 53233 a - Handle b - Knot c - Retainer CAUTION Starter sheave must be firmly held against spring tension to prevent spring from unwinding. 6. Pull starter rope from rewind starter until rope is fully unwound from starter sheave. b a 57052 a - Rope b - Sheave Page 8-8 90-826883R2 JUNE 1998
