Download Cursor - Helmut Singer Elektronik

Transcript
Q
(..)
CI)
Q
...
...
(..)
CI)
Q
~
Q
...
~
z
~
Create measurement sequencesusing the front
panel controls for semi-automated testing.
Streamlined Front-Panel Setups
Just pressSAVESETUPto savea front-panel
setupinsteadof recreatingit againand again.
Thescopeinstantlystoresall front panelinformation,includingintensity,cursorlocations
andcontrolsettings.And you labeleachsetup
with a descriptivename.
The2400Bseriesscopeswill retainup to 30
front-panelsetupsin non-volatilememoryuntil
you decideto replaceor deletethem.
Easy Automation
With built-in sequencing,you candevelopa
customtest serieswithoutwriting a line of
code.Firstsaveand labela seriesof frontpanelsetup,eachrepresentinga step in the
test procedure.Thenlink the stepsin any order
you want.
To executeyour customtest series,pressSTEP
to sequencethroughthe individualsteps.This
is extremelyusefulfor manufacturingevaluation and devicecharacterization.
You'll appreciatethe easeand efficiencyof the 2400B
seriesautomaticsequencing.
TriggerModes:Lines, FLD1, FLD2, ALT
(FLD1/FLD2).
Back PorchClamp:Within 1.0 div of the
groundreference.
Formoredetailed
specifications,
contactany
Tektronix
SalesOfficeor authorized
Tektronix
HIGH-DEFINITION
TELEVISION
(OPTION
5H)
Onlyavailablewith the 24678scopeandstandard in the 2467BHD,this optionlets you
triggeron tri-levelsync pulses,automatically
sensesthe HDTVstandardbeingusedand
autosetsitselfaccordingly.
StableSyncSeparation:Fromtri-levelandbilevelsync-positiveor sync-negative
composite
or componentvideoon systemswith 525 to
1280linesperframe,50 Hzor 60 Hzfield rate,
interlacedor non interlaced.
HDVideoTriggeringModes:Lines, FLD 1, FLD2,
VERTICAL
SYSTEM
Factor: 2 mV/divto 5 V/div,
continuouslyvariablebetweenV/divsettings
(CH1 and CH2). 100 mV/divand500 mV/div
(CH3 and CH4).
Deflection Factor Basic Accuracy::t2%.
measuredat any V/divwith a 4- or 5-div signal,
centeredon screen(CH1 and CH2). :t10%
(CH3 and CH4) between15°Cand35°C.
Frequency
Step Tr Response
)/(Tr=O.35/BW)
Characteristics
distributornearyou.
ALT (FLD 1/FLD2), and the Active Video Mode.
StandardTV Presets:Lines,fields,frames,line
select, active video, horizontal blanking, vertical
blanking, pixel and TSG triggering.
Bandwidth limiter: Reduces the upper -3 dB
to 50 MHz.
Frequency Response (-3 dB 400 MHz) Flatness:
:t1% for 50 kHzto 100 MHz, :t1%-2% for
10 MHz to 20 MHz,:t2% for 20 MHz to 30 MHz.
Counter/fimer/frigger
(C1T)
(Option 06) And C1T/Word
Recognizer (Option 09)
Theseoptionsfeaturea crystal-controlled
timebasewith 0.001
% accuracy.Option09 addsa
wordrecognizer.UsefulwhenprobingnL -compatiblelogicfamilies,this 17-bit wordrecognizer
is operableup to 20 MHzwith an externalclock
andup to 10 MHzwith the internalclock.
2400B Series Options
Thefollowingoptionsare not retrofittableon
standardproductsafter purchase.
VIDEOWAVEFORM
MEASUREMENT
SYSTEM
(OPTION
05)
Tailorsthe 24458,24658and24678for applicationsinvolvingbroadcastandcabletelevision,
graphicsdisplaysand raster-scansystems.It
enablesCRTreadoutof the line numberof field
selectedfor triggering,so the operatorknows
exactlywhatthe displayrepresents.
SyncSeparation:Stablesyncseparationfrom
sync-positiveor sync-negative
compositevideo
on systemswith 525 to 1280lines.50 Hzor
60 Hz,interlacedor noninterlaced.
1 2 0
Theseoptionsalso featurea 7-digit CRT
readoutdisplayfor Frequency(0.5 Hzto
150 MHz),Period(6.666667ns to 2 s), Totalize
(to 9,999,999)and Delayby Eventstriggering
(up to 4,194,303).
~ T using cursors
~T using delay
Delayfrom A trig
to B sweep
GPIB Interface (Option 10)
Functions implemented include SH1, AH1, T6,
L3, SR1, RL1, CO1, E1, OTO,COand PPO.