Download Operator`s Manual

<
CLEANING THE GENERATOR SET
INSPECT AND CLEAN ENGINE
Clean the generator set every six months, or more often
in severe conditions. Remove dust with a damp cloth.
Use steam to removetar or other residue (do not steamclean the set while it is running). Protect the generator,
air cleaner, control box, fuel solenoid, and electrical
connectors from cleaning solutions. Do not clean with
solvents; they may damage electrical connectors.
(INTERNAL)
Widely varying operating conditions, light loads (less
than 50 percent), and fuel with additives and impurities
can degrade engine performance and shorten engine
life.
Have the combustion chamber inspected internally for
wear and carbon buildup after 300 hours. Becausethis
means removingthe cylinder head, it must only bedone
by an authorized service representative, who is trained
in genset maintenance and repair.
I
4-7
Redistribution or publication of this document,
by any means, is strictly prohibited.