Download EndoWorks 7.4 IT Specifications

Transcript
IT SPECIFICATIONS
MINIMUM (MIN) SYSTEM SPECIFICATIONS
*
All computer equipment, including the server and clients, should be used as dedicated terminals for EndoWorks. If other than
Olympus QA tested and approved EndoWorks software is installed and run on an Olympus-supplied or customer-supplied server or
workstation, malfunction of EndoWorks or destruction of EndoWorks data may result.
Note: Any non-image capture computer can be virtual or physical, as long as all system requirements are met and software is used
within only one virtual (or otherwise simulated) hardware system on the licensed computer. Olympus technicians cannot support the
virtual environment, only the EndoWorks applications running on it.
NETWORK SERVER (Dedicated Server) (system can be customer supplied)
•
Windows 2003 Server R2 32 bit SP2
•
DVD drive
•
Intel Quad Core 2.4 GHz processor
•
Backup system
•
4 GB RAM
•
15” VGA monitor (1024x768 resolution)
•
600 GB hard drive (NTFS)
•
NIC 1000Base-T
•
Power backup (UPS)
Note: Typically supports an average customer for the life of
the hardware. If your facility is a large institution, is
capturing video, and/or migrating data from a legacy
system, see the Data Storage section for calculating
additional storage needs.
Note: Operating system and environment built by
customer; Olympus to install application and
prerequisites.
IMAGE CAPTURE WORKSTATION (Olympus-Supplied Hardware Only)
•
Windows XP Professional SP3
•
CD-ROM drive/CD R/W (to transfer images)
•
Pentium Core 2 Dual processor 3.0 GHz
•
•
2 GB RAM
15” VGA monitor (1024x768 resolution) / 19”
(Recommended)
•
160 GB hard drive
•
100Base-T NIC
•
Wireless not supported
NON-IMAGE CAPTURE WORKSTATION (REGISTRATION & SCHEDULING) (system can be customer supplied)
•
Windows XP Professional
•
CD-ROM drive/CD R/W (to transfer images)
•
Pentium Core 2 Dual processor 3.0 GHz
•
•
2 GB RAM
15” VGA monitor (1024x768 resolution) / 19”
(Recommended)
•
160 GB hard drive
•
100Base-T NIC
•
Wireless not supported
STANDALONE / PEER-TO-PEER SERVER (Olympus-Supplied Hardware Only)
*
•
Windows XP Professional SP3
•
DVD-ROM drive
•
Pentium Core 2 Dual processor 3.0 GHz
•
15” VGA monitor (1024x768 resolution)
•
2 GB RAM
•
•
500 GB available hard drive space
100Base-T NIC (Min) / 1000Base-T (Recommended)
(2 NICs, if not on backbone)
Minimum specifications should be carefully considered based on facility size and procedure volume.
Contact your local Field Service Engineer to discuss your individual requirements as specifications are subject to change.
COPYRIGHT 2013 OLYMPUS AMERICA INC.
Page 3 of 12
TR0020V16