1
Download GENERAL INFORMATION SECTION GI
Transcript
CONSULT-II CHECKING SYSTEM SGI619 General The R20 model as outlined in this supplement is equipped with the DDL-1 connector which is compatible with both CONSULT and CONSULT-II. During the establishment of this supplement, the CONSULT-II has been utilised. Function and System Application Diagnostic test mode Self-diagnostic results ECU discriminated No. Data monitor Active test ECM part number Control unit initialisation Self-function check Function ENGINE Air bag ABS NATS*1 Self-diagnostic results can be read and erased quickly. Classification number of a replacement ECU can be read to prevent an incorrect ECU from being installed. Input/Output data in the ECM can be read. Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ECMs and also shifts some parameters in a specified range. ECM part number can be read. All registered ignition key IDs in NATS components can be initialised and new IDs can be registered. ECM checks its own NATS communication interface. x x x x — x — — x — x — x — x — x — x — — — — x — — — x x: Applicable *1: NATS: Nissan Anti-Theft System GI-26
