Download LEVO combi SERVICE

8.19. Replacing the light (front, white)
A
•
•
•
23
•
•
•
•
Disconnect the light plug (A) from the battery box.
Loosen the screws at the side using a 5 mm hexagon
key for removing the white light (B).
Loosen the Phillips head screw using the correlated
screwdriver and remove the cover plate from the light
(D).
Pull the bulb thread carefully out to unplug the
connectors.
Remove the hexagon screw (C) including the serrated
washer using a 5 mm hexagon key.
Demount the ligth.
Reassemble the new light in the reverse order.
D
C
B
8.20. Replacing the indicator
Blinker at the back
• Open the cover of the battery box.
• Demount the bulb thread of the blinker.
• Unplug all connectors and pull back the cables to the battery box.
• Remove the indicator.
• Reassemble the new indicator in the reverse order.
Blinker at the front
• Loosen the screw at the cover plate of the indicator using a Phillips screwdriver and remove the
cover plate.
• Loosen in the inside of the indicator casing the hexagon screw using the correlative 5 mm key.
• Remove the indicator from the base frame.
• Unplug all connectors.
• Reassemble the new indicator in the reverse order.
- 18 -
13.12.04