Download Biolytix BioPod (BF6)

Biolytix BioPod (BF6) Wastewater Treatment System
Electrical Installation Manual
This document is required to be read prior to installation and the Quality Assurance sections completed
as a part of the installation process.
Please note that a failure to follow these procedures will void the Biolytix Manufacturer’s Warranty.
This manual covers the following:
1. Owners and contractor details
2. Connection of Mains Power
3. Connection of an Audio-Visual Alarm
Contact N2P Control Ltd if you have any uncertainty about the electrical installation.
New Zealand – +64 9 570 1919
A Licensed Electrical Contractor is required to complete this procedure to Australian AS 3000 and all other relevant
Australian Standards
The Electrician must complete, sign and date, where applicable the following pages.
This is a Biolytix Quality Assurance document that must be returned to Biolytix immediately on completion, if it is
not received the Biolytix Manufacturer’s Warranty will be void.
Biolytix does not accept responsibility for workmanship of the Electrical Contractor.
If sub-standard electrical workmanship leads to failures within the Biolytix System, the client will be invoiced for any
repairs.
On completion please Scan and Email this document to: [email protected]
Important: Biolytix will not issue a commissioning certificate before the completed documents are received
from the client.
Biolytix Guideline- Pt Boston - FINAL_V3
Final Revision: 30/10/2013
Page 7 of 36