Download Discovery* Dicom Conformance Statement

4.3.1.2.2.2
Basic Film box SOP Class
The Print SCU supports the following DIMSE Service Elements for the Basic Film Box
SOP Class.
•
N-CREATE
– Requests the Print SCP to create an instance of Film Box.
•
N-ACTION
– Requests the Print SCP to print the Film Box onto Printer.
•
N-DELETE
– Requests the Print SCP to delete the Film Box Instance.
The Following Attribute values are supported:
Attribute
DICOM Tag
Valid Range
Default Value
Image Display Format
( 2010, 0010 )
STANDARD/C,R
Printer Dependent
Set in User Interface
Reference Film
Session Sequence
( 2010, 0500 )
*Film Orientation
( 2010, 0040 )
PORTRAIT
Set in Configuration File
Film Size ID
( 2010, 0050 )
Sent zero length
Sent zero length
*Magnification type
( 2010, 0060 )
BILINEAR
CUBIC
REPLICATE
NONE
Set in Configuration File
*Max Density
( 2010, 0130 )
0-4095
Set in Configuration File
Configuration
Information
( 2010, 0150 )
Printer Dependent
Set in Configuration File
*Smoothing type
( 2010, 0080 )
Printer Dependent
Set in Configuration File
*Border density
( 2010, 0100 )
BLACK
WHITE
Set in Configuration File
*Empty image density
( 2010, 0110 )
BLACK
WHITE
Set in Configuration File
*Min density
( 2010, 0120 )
0-4094
Set in Configuration File
*Trim
( 2010, 0140 )
NO
NO
Note: Attributes “sent zero length” use the camera default values.
Note: * denotes that the attribute is optional for the SCU. However, we do provide values
for all of these optional attributes and if the SCP does not support the requested
value it may choose to either return a failure status or ignore the value provided
and use its default value.
If Failure status is returned during N-CREATE operation of Film box following
action will be taken by Print SCU.
0x213: “Resource Limitation” message will be sent.
0x106: “Unsupported Film Format” message will be sent.
All other status: “Failure” message will be sent