Download Discovery* Dicom Conformance Statement

In all the cases the print session will be terminated.
If Failure status is returned during N-ACTION operation of Film box following action
will be taken by Print SCU.
0xC602: “Unable to Create Print Job” message will be sent.
All other status: “Failure” message will be sent.
In all the cases the print session will be terminated.
If Failure status is returned during N-DELETE operation of Film box following
action will be taken by Print SCU.
All the return status: “Failure” message will be sent and the print session will be
terminated.
4.3.1.2.2.3
Basic Grayscale Image Box SOP Class
The Print SCU supports the following DIMSE Service Elements for Grayscale Image Box
SOP Class.
N-SET – Requests the Printer to set the image box attributes.
The Following Attribute values are supported:
Attribute
DICOM Tag
Image Position
( 2020, 0010 )
Pre-formatted Grayscale Image
Sequence
( 2020, 0110 )
Valid Range
Default Value
Based on Image
Display Format
No Default Value
Samples per pixel
( 0028, 0002 )
1
1
Photometric Interpretation
( 0028, 0004 )
MONOCHROME2
MONOCHROME2
Rows
( 0028, 0010 )
Image Dependent
Image Dependent
Columns
( 0028, 0011 )
Image Dependent
Image Dependent
Pixel Aspect Ratio
( 0028, 0034 )
1/1
1/1
Bits Allocated
( 0028, 0100 )
8
8
Bits Stored
( 0028, 0101 )
8
8
High Bit
( 0028, 0102 )
7
7
Pixel Representation
( 0028, 0103 )
0 (unsigned integer)
0 (unsigned integer)
( 2020, 0020 )
NORMAL
NORMAL
*Polarity
Note: * denotes that the attribute is optional for the SCU. However, we do provide values for all of these
optional attributes and if the SCP does not support the requested value it may choose to either
return a failure status or ignore the value provided and use its default value.
If Failure status is returned during N-SET operation of Image Box following action will be
taken by Print SCU.
0xC605: “Resources temporarily not available” message will be sent.