Download SERVICE MANUAL - Cloudfront.net

3.17. Fuses
•
Never touch places other than those specified. Touching places other than those
specified can cause electric shock and short circuit. Disconnect the machine from
the supply before attempting the replacement of any fuse.
•
FUSES should only be replaced by QUALIFIED SERVICE PERSONNEL.
•
FUSES should only be replaced with one of the same type and rating.
There are a number of fuses used on this machine to protect the user and the machine from damage. Only
replace the fuse once you have removed the cause of its failure. Detailed below is a list of the fuses used,
their location and if relevant PCB reference:
PART NUMBER
514-5078-5000
514-5078-3150
514-5078-6300
514-5078-6300
514-5078-6300
LOCATION
EP1302 (IEC INLET)
838-13616 (F1&F2)
838-13578 (F1)
838-13142 (F101&F201)
838-11856CE-02
TYPE & DETAILS
5x20 HRC SB 5000mA
5x20 HRC SB 3150mA
5x20 HRC SB 6300mA
5x20 HRC SB 6300mA
5x20 HRC SB 6300mA
QTY
1
2
1
2
1
There are also fuses located on the Monitor PCB. Refer to the relevant Monitor manual supplied to
reference these fuses.
28