Download Dr. Mach - Frank`s Hospital Workshop

Dr. Mach
Ceiling and wall attachment
Lamps and Engineering
4.2 Mounting the wall bearing
For mounting the wall bearing proceed as follows:
Fastening with tubular dowel
•
•
Screw tight the wall bearing with two M10x35
screws (having first pushed the washer of
∅ 10mm and the plastic cover washer on the
screw).
Place cover 1, cover 2 and cap 3 in position in
such a way that they engage in the locks.
Fastening with counter-plate
•
•
59500001
Edition 06
Fix the wall bearing, push through the M10
threaded rods and screw on the wall bracket
and counter-plate using bolts and hexagonal
nuts (if necessary, weld the hexagonal nuts to
the counter-plate).
Place cover 1, cover 2 and cap 3 in position in
such a way that they engage in the locks.
11.03.2003 / Bak Page 17/48