Download R2D2 Manual - Runyon Surface Prep Supply

Instruction manual R2D2
1.
-3-
Introduction
CONTEC® would like to thank you for deciding to purchase the R2D2 dust collector.
The R2D2 has been specially developed for connection to floor preparation machinery such as
mobile blast machines, concrete planers and floor grinders to enable a dust free operation.
Even huge quantities of dust can be handled by the R2D2. This means the R2D2 is suitable
for use with high performance machinery. In the CONTEC® product range, the R2D2 is
specially used for the MODUL 350 and ELGATOR mobile shotblasters and the OMEGA 700
floor grinder. The R2D2 can be adapted for a wide range of applications not only limited to
the construction industry.
In the following pages, you will find all the necessary information, to achieve a safe, reliable
and highly competent performance from the R2D2. It is therefore important to follow the
strict guidelines for the deployment and servicing of the R2D2 in order to obtain optimum
performance.
It is in the interest of all persons operating or using the machine, to take note of the operating
instructions in this manual in order to be fully conversant with the components and functions
of the R2D2 dust collector.
2
Machine applications
Collecting of dry dust produced by CONTEC® Surface Preparation Machines. The use of the
machine outside is only possible in dry weather.
CONTEC® GmbH Hauptstrasse 146, 57518 Alsdorf, Deutschland/ Germany/ Allemagne
[email protected], www.contecnorthamerica.com
© CONTEC® 2012