Download 3 - Vari-Lite
Transcript
MAINTENANCE PROCEDURES : SPOT OPTIC ASSEMBLY REPLACEMENT 2 Step 19. Finish by performing steps 2 through 4 in the removal section in reverse order. Note: To prevent binding, thread edge screw all the way into linear actuator motor before reinstalling. Secure right-side optic assembly clamps first when re-installing. Top Head Cover Fan Guide Rod Spot Optic Assembly Linear Actuator Motor (see detail) Edge Screw Clamp (Secure this side first when reinstalling.) Optic Assembly Side View Motor Edge Screw Thread all the way into motor as shown before re-installing. Figure 2-22: VL3000 Spot Optic Assembly Replacement 02.96 78.001 0 G 41