Download 3 - Vari-Lite

Transcript
MAINTENANCE PROCEDURES : SPOT OPTIC ASSEMBLY REPLACEMENT
2
Step 19. Finish by performing steps 2 through 4 in the removal section in reverse order.
Note: To prevent binding, thread edge screw all the way into linear actuator motor before reinstalling. Secure right-side optic assembly clamps first when re-installing.
Top Head Cover
Fan
Guide Rod
Spot Optic Assembly
Linear Actuator
Motor (see detail)
Edge
Screw
Clamp
(Secure this side first when reinstalling.)
Optic Assembly Side View
Motor
Edge Screw
Thread all the way into motor
as shown before re-installing.
Figure 2-22: VL3000 Spot Optic Assembly Replacement
02.96 78.001 0 G
41