Download Instruction Manual

SERVICE MANUAL AVALON La Petite-X Single-Cup Brewer
10.3 Brewer Assembly
Removing the brewer
1. Open the machine door;
2. Toggle the brewer switch (SW4 ) to
release the filter paper and cut the filter paper;
3. Remove the coffee spout and the hose
support bracket from the right side of the brewer assembly;
4. Support the brewer assembly by holding
the aluminum shaft on the right side of the
brewer assembly;
5. With your left hand, slide the retaining pin
over to the right and then down;
6. Pull the brewer assembly straight towards
you.
Pin
La Petite-X Revision 6 01/2015
Servicing Parts
Retaining pin
Installing the brewer
1. Make sure that the dog drive pin in the
back of the brewer is at 1 o’clock;
2. Align the left edge of the brewer on the left
bracket support;
3. Push the brewer back completely into the
dog drive motor;
4. Slide the brewer’s retaining pin up and
then left.
Dog
drive
61