Download C11.​pdf

RESTRICTED USE ONLY
Fargo Electronics, Inc.
Using the Defined Area Option (continued)
Step
2
Procedure
When the card grid is first activated, a small black square will appear at its
default size of .2" x .2"/5mm x 5mm and at its default location in the lower lefthand corner (0,0). This square represents the first defined area.


3
Determine the area of the card needed to define for a signature panel with a
different size and location than the driver's standard Omit Signature Area
setting. (Note: This area is indicated by the dashed outline.)
Determine the area size by actually printing a card and looking at it in the
same orientation as when it exits the Printer.
Measure the total size of the desired area and enter those dimensions into the
dimension boxes. (Note: The minimum size an area is .2" x .2"/5mm x 5mm.)
Continued on the next page
Karen Atkins
Access Level-2
ID# 1234478
.35“
1.9“
Persona C11 Card Printer and Persona M11 Card Printer User Guide (Rev. 5.0)
175