Download Hydraflow Manual

Preferred behind the cab mount (optimum suction conditions)
Behind Cap Mount
Suction 1-1/4” or 1-1/2” (see table)
Case drain connection
(optional 1/2”)
High Pressure Pump to Hydraflow 3/4”
High Pressure to
Hydraulic motor 3/4”
Low Pressure Return Motor to Hydraflow 1”
 Review Hose Chart on page 4 to insure the correct suction hose sizing.  For off road applications do not mount Hydraflow directly to the frame rail. Behind the cab mount is recommended.
 See system circuit drawing for complete hydraulic plumbing.
 If Hydraflow is to be spaced off of the frame rail, refer to page 11 for recommended bracket.
Alternate Frame Rail Mount
Suction 1-1/4” or 1-1/2” (see table)
High Pressure Pump to Hydraflow 3/4”
High Pressure to
Hydraulic motor 3/4”
5
(800) 471-8769
Case drain connection
(optional 1/2”)
Low Pressure Return Motor to Hydraflow 1”