Download 2 - PlayKom.Ru

9-3b OUTPUT TEST
OUTPUT TEST
1P GUN MOTOR OFF
1P START LAMP OFF
2P GUN MOTOR OFF
2P START LAMP OFF
ROOM LAMP OFF
COIN LAMP OFF
SENSOR ON
SENSOR ON
9
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9-3b OUTPUT TEST Screen
The condition of each output device can be checked. Periodically check the condition of each output device on this screen. Conditions are normal
if each device operates and yields output as indicated below.
<Operation>
1
2
3
Press the SERVICE Button and move the cursor to the item (output device) you want to test.
Whenever the TEST Button is pressed, the display on the right side of the item goes from OFF to ON and the selected output device
operates. Confirm that the device operates normally.
Press the SERVICE Button and move the cursor to EXIT. When the TEST Button is pressed, the game test mode menu screen reappears.
<Menu Explanation>
GUN MOTOR:
When ON the motor will operate and the controller will vibrate, when OFF it will stop.
SENSOR:
Will continue to switch between ON and OFF when the motor is in operation.
START LAMP:
Start lamp will turn on when ON and off when OFF.
ROOM LAMP:
Main cabinet ceiling florescent lamp will turn on when ON and off when OFF.
COIN LAMP:
Coin insert slot lamp will turn on when ON and off when OFF.
EXIT:
Game Test Menu screen reappears.
EXPLANATION OF TEST AND DATA DISPLAY
-> EXIT
9-3c GUN CALIBRATION
Calibration is relevant to operability. Manipulate and adjust the control unit with appropriate force. Do not make adjustments with excessive force.
Change the volume input values of the control unit. After changing the
volume, use this screen to adjust and check it.
You must adjust the sight for 1P side and 2P side separately.
<Operation>
1
Press the SERVICE Button and move the cursor to the item you
want to select. Move the cursor to CALIBRATION START
and press the TEST Button to adjust the calibration.
2
Move the cursor to EXIT and press the TEST Button, the calibration screen exits and the game test mode menu screen reappears.
GUN CALIBRATION
CALIBRATION START
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
FIG. 9-3c01 GUN CALIBRATION Screen
23