Download 6 - Bargam UK
Transcript
5ADJUSTMENT AND SETTING UP 5 368.037 5.1. DRAWBAR LENGTH - ADJUSTMENT (just for TRAILED UNITS) è Length adjustment The drawbar can be adjusted at three lengths, proceeding as shown below. A CAUTION: this operation has to be carried out on flat ground, after locking trailed tank frame and wheels, as shown in the figure. C B · Unscrew and take screws A out. · Loosen screws B. · Move drawbar C in the position you want, aligning the holes. · Fit screws A, and tighten them with their respective nuts. · Tighten screws and lock nuts B. IDM - 37.010 Ec.0 C è Height Adjustment · Loosen screws A, B and C. · Put the drawbar at the height you want. · Tighten screws A and B. · Screw tight screw C and tighten its respective lock nut. 450,6 325 IDM - 37.011 Ec.0 157,6 C A B – 21 –