Download 2. KGP-920 - SI-TEX Marine Electronics

KGP-920
Chapter 5
Basic Operation
(Page 2) Press [SEL] key when changing a page.
Antenna height
Present Date (Month, Day, Year)
Present time (Greenwich or local time)
The elapsed time (mm:ss) after you
pressed MOB key
NOTE: The time display that is shown when
the elapsed time has exceeded 99 minutes
59 seconds after the MOB key was pressed.
(Page 3)
Speed (in knots)
Course
Present position
NOTE: You can use only the following five keys in MOB mode: [EVT] [CLR] [CTRS] [PWR]
[OFF]
CLR
5.7
Clears the MOB mode, and returns to the previous screen when you pressed
MOB key. When alarm is sounding, press CLR key to stop it. Press it again to
return to the screen you were at before you pressed MOB key.
Recalling event or MOB position
(1) Press [MENU] key until menu options 1 to 9 appears.
(2) Press [1] key to select “1:WAYPOINT”.
(3) Enter a storage number (000 or 199) of position data you wish to check.
NOTE:000:
Position data where you pressed MOB key
001 to 199: Position data that contains events
Use [CLR] key if you have entered an incorrect number.
You can reenter an event number.
(4) Press [ENT] key to recall data of the selected storage number.
93121662-00
5-9