Download warning - Taylor Big Red

WARNING
G. The mast is vertical and the truck is not operated on a side slope
H. The platform is horizontal and centered and not tilted forward or backward
I.
Place all travel controls in neutral and set parking brake
J.
Proper marking of the work area
K. Lift and lower personnel smoothly, with caution, and only at their request
L. Avoid overhead obstructions and electric wires
M. Keep hands and feet clear of controls other than those in use
N. Move truck and/or platform slowly, only for minor adjustments
O. Have a trained operator in position to control the truck
P. When the operator is not in the operating position, engage the parking brake and block the wheels
Q. The combined weight of the platform, load, and personnel is not to exceed one–half of the capacity as indicated
on the nameplate of the truck on which the platform is used
R. Personnel are to remain on the platform floor
S. Personnel and equipment on the platform are not to exceed the available space
T. Lower platform to floor level for personnel to enter and exit. Do not climb on any part of the truck in attempting to
enter and exit
A complete listing of the requirements for safe operation when lifting personnel is located in ANSI B56.1–2005 para
4.17 and is included in Appendix B of this manual.
77