1
Download SERVICE MANUAL Dual Camera VPC-TH1 VPC
Transcript
FILE NO. SERVICE MANUAL VPC-TH1 (Product Code : 168 173 02) (U.S.A.) (Canada) (Taiwan) (General) Dual Camera VPC-TH1EX (Product Code : 168 173 03) (Europe) (U.K.) (South America) (China) (Australia) (Hong Kong) (Russia) (Middle East) (Africa) (General) (Korea) (Taiwan) VPC-TH1GX (Product Code : 168 173 04) (South America) (China) (Australia) (Hong Kong) (General) (Korea) (Taiwan) VPC-TH1R (Product Code : 168 173 06) (U.S.A.) (Canada) (Taiwan) (General) Contents 1. OUTLINE OF CIRCUIT DESCRIPTION ............................... 3 2. DISASSEMBLY ................................................................... 12 3. ELECTRICAL ADJUSTMENT ............................................. 18 4. USB STORAGE INFORMATION REGISTRATION ............ 24 5. TROUBLESHOOTING GUIDE ............................................ 25 6. PARTS LIST ........................................................................ 26 CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS ........... C1 RoHS •This product does not contain any hazardous substances prohibited by the RoHS Directive. WARNING •You are requested to use RoHS compliant parts for maintenance or repair. •You are requested to use lead-free solder. (This product has been manufactured using lead-free solder. Be sure to follow the warning given on page 2 when carrying out repair work.) CAUTION : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. NOTE : 1. Parts order must contain model number, part number, and description. 2. Substitute parts may be supplied as the service parts. 3. N. S. P. : Not available as service parts. Design and specification are subject to change without notice. SG314/U, EX, GX, U2, EX2, GX2, U3, EX3, GX3, U4 (R) VPC-TH1EXR (Product Code : 168 173 07) (Europe) (U.K.) (South America) (China) (Australia) (Hong Kong) (Russia) (Middle East) (Africa) (General) (Korea) (Taiwan) VPC-TH1GXR (Product Code : 168 173 08) (South America) (China) (Australia) (Hong Kong) (General) (Korea) (Taiwan) VPC-TH1BL (Product Code : 168 173 10) (U.S.A.) (Canada) (Taiwan) (General) VPC-TH1EXBL (Product Code : 168 173 11) (Europe) (U.K.) (South America) (China) (Australia) (Hong Kong) (Russia) (Middle East) (Africa) (General) (Korea) (Taiwan) VPC-TH1GXBL (Product Code : 168 173 12) (South America) (China) (Australia) (Hong Kong) (General) (Korea) (Taiwan) VPC-ZH1R (Product Code : 168 173 13) (U.S.A.) (Canada) REFERENCE No. SM5310773 PRODUCT SAFETY NOTICE The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown. WARNING Do not use solder containing lead. Note: This product has been manufactured using lead-free solder in order to help preserve the environment. Because of this, be sure to use lead-free solder when carrying out repair work, and never use solder containing lead. If replacing existing solder containing lead with lead-free solder in the soldered parts of products that have been manufactured up until now, remove all of the existing solder at those parts before applying the lead-free solder. Lead-free solder has a melting point that is 30 - 40°C (86 104°F) higher than solder containing lead, and moreover it does not contain lead which attaches easily to other metals. As a result, it does not melt as easily as solder containing lead, and soldering will be more difficult even if the temperature of the soldering iron is increased. The extra difficulty in soldering means that soldering time will increase and damage to the components or the circuit board may easily occur. Because of this, you should use a soldering iron and solder that satisfy the following conditions when carrying out repair work. Soldering iron Use a soldering iron which is 70 W or equivalent, and which lets you adjust the tip temperature up to 450°C (842°F). It should also have as good temperature recovery characteristics as possible. Set the temperature to 350°C (662°F) or less for chip components, to 380°C (716°F) for lead wires and similar, and to 420°C (788°F) when installing and removing shield plates. The tip of the soldering iron should have a C-cut shape or a driver shape so that it can contact the circuit board as flat or in a line as much as possible. Solder Use solder with the metal content and composition ratio by weight given in the table below. Do not use solders which do not meet these conditions. Metal content Tin (Sn) Silver (Ag) Copper (Cu) Composition ratio by weight 96.5 % 3.0 % 0.5 % Lead-free solder is available for purchase as a service tool. Use the following part number when ordering: Part name: Lead-free solder with resin (0.5 mm dia., 500 g) Part number: VJ8-0270 –2– 1. OUTLINE OF CIRCUIT DESCRIPTION 1-1. CMOS CIRCUIT DESCRIPTION 1. IC Configuration The CMOS peripheral circuit block basically consists of the following ICs. IC911 (MT9J001I12STCV) CMOS imager CDS, AGC, ADC built-in H driver, V driver, serial communication circuit built-in 2. IC911 (CMOS) [Structure] The electric charges which are generated when each pixel is optically converted are in turn converted into signal voltages by the FD amplifier, and they are then transmitted by the builtin H driver and V driver. The signals are sampled and amplified by the CDS and PGA circuits at the point they are output, and then they are AD converted and output. The output uses the 12 bit LVDS interface. 1/2.3-inch positive pixel array CMOS-type fixed imaging element Effective pixels 3856 (H) X 2764 (V) –3– 1-2. CP1 and VF1 CIRCUIT DESCRIPTION 1. Circuit Description 1-1. Digital clamp 2. Outline of Operation When the shutter opens, the reset signals (ASIC and CPU) and the serial signals (“take a picture” commands) from the 8-bit microprocessor are input and operation starts. The picture data from CMOS passes through the A/D and CDS, and is then input to the ASIC as digital data. The AF, AE, AWB, shutter, and AGC value are computed from this data, and three exposures are made to obtain the optimum picture. The data which has already been stored in the SDRAM is read by the CPU and color generation is carried out. Each pixel is interpolated from the surrounding data as being either R, G, and B primary color data to produce R, G and B data. At this time, correction of the lens distortion which is a characteristic of wide-angle lenses is carried out. After AWB and γ processing are carried out, a matrix is generated and aperture correction is carried out for the Y signal, and the data is then compressed by JPEG and is then written to card memory (SD card). When the data is to be output to an external device, it is taken data from the memory and output via the USB I/F. When played back on the LCD and monitor, data is transferred from memery to the SDRAM, and the image is then elongated so that it is displayed over the SDRAM display area. The optical black section of the extracts averaged values from the subsequent data to make the black level of the output data uniform for each line. The optical black section averaged value for each line is taken as the sum of the value for the previous line multiplied by the coefficient k and the value for the current line multiplied by the coefficient 1-k. 1-2. Signal processor 1. γ correction circuit This circuit performs (gamma) correction in order to maintain a linear relationship between the light input to the camera and the light output from the picture screen. 2. Color generation circuit This circuit converts the image sensor into RGB signals. 3. Matrix circuit This circuit generates the Y signals, R-Y signals and B-Y signals from the RGB signals. 4. Horizontal and vertical aperture circuit This circuit is used gemerate the aperture signal. 3. LCD Block 1-3. AE/AWB and AF computing circuit The LCD display circuit is located on the CP1 board and VF1 board, and consists of components such as a power circuit. The signals from the ASIC are 8-bit digital signals, that is input to the LCD directly. The 8-bit digital signals are converted to RGB signals inside the LCD driver circuit . This LCD has a 3-wire serial, and functions such as the brightness and image quality are controlled. Because the LCD closes more as the difference in potential between the VCOM (common polar voltage: AC) and the R, G and B signals becomes greater, the display becomes darker; if the difference in potential is smaller, the element opens and the LCD become brighter. In addition, the timing pulses for signals other than the video signals are also input from the ASIC directory to the LCD. The AE/AWB carries out computation based on a 64-segment screen, and the AF carries out computations based on a 6segment screen. 1-4. SDRAM controller This circuit outputs address, RAS, CAS and CS data for controlling the SDRAM. It also refreshes the SDRAM. 1-5. Communication control 1. SDIO This is the interface for the 8-bit microprocessor. 1-6. Digital encorder It generates chroma signal from color difference signal. –4– 4. Lens drive block 5. Video Clip Recording and Playback 4-1. Focus drive The 16-bit serial data signals (LENS_SDI) and (LENS_SCLK and LENS_EN) which are output from the ASIC (IC101) are used to drive (FOCUS A +, FOCUS A -, FOCUS B + and FOCUS B -) by the motor driver IC (IC951), and are then used to microstep-drive the stepping motor for focusing operation. Detection of the standard focusing positions is carried out by means of the photointerruptor (F_SENSE) inside the lens block. 5-1. Recording The signal from the camera block is input to IC101 (ASIC). The data that is input to the ASIC is input to SDRAM, and converts this data to encoded MPEG4 data, after which it is written in sequence onto the SD card as streaming data. At this time, the audio signals that are input to the built-in microphone are converted into digital data by the audio CODEC IC of IC183, and they are then input to ASIC. The audio data is then encoded (AAC), and then it is written in sequence onto the SD card together as streaming data with the image signals described above. 4-2. Zoom drive The 16-bit serial data signals (LENS_SDI) and (LENS_SCLK and LENS_EN) which are output from the ASIC (IC101) are used to drive (ZOOM A +, ZOOM A -, ZOOM B + and ZOOM B -) by the motor driver IC (IC951), and are then used to microstep-drive the stepping motor for zooming operation. Detection of the standard zooming positions is carried out by means of the photointerruptor (F_SENSE) inside the lens block. 5-2. Playback The data is read from the SD card, and the encoded data is decoded into image data where it is displayed by the LCD or on a TV monitor. At the same time, the audio data is also decoded, and is input to IC182 as digital data. D/A conversion is carried out at IC182, and the sound is then output to the speaker or to the LINE OUT terminal. 4-3. Iris drive The drive method is a galvanometer type without braking coil. The output from the Hall sensor inside the lens is amplified by the Hall amplifier circuit inside the IC951 lens drive IC, and the difference between the current and target aperture determined by the resulting output and the exposure amout (16 bit serial signal (LENS_SDI) and (LENS_SCLK and LENS_EN)) output from the ASIC (IC101) is input to the servo amplifier circuit (IC951) to keep the aperture automatically controlled (DRIVE+ and DRIVE -) to the target aperture. 6. Audio CODEC Circuit (IC182) The audio signals from the microphone are converted into 16bit digital data. AD conversion is carried out at a maximum sampling frequency of 48 kHz. During audio playback, the 16-bit digital data is converted into analog signals and these drive headphone through the speaker or line out system and headphone amplifier. DA conversion is carried out at a maximum sampling frequency of 48 kHz. 4-4. Shutter drive Reverse voltage is applied to the above aperture drive coil to operate the shutter. When the shutter operates, the SHUTTER + signal that is output from the ASIC (IC101) becomes high (input to SHUTTER of IC951) and the shutter operates. –5– 1-3. PWA POWER CIRCUIT DESCRIPTION 1. Outline 3. Motor System Power Output This is the main power circuit, and is comprised of the following blocks. Switching controller (IC501) Motor system power output (L5301) Digital 3.25 V power output (L5002) Digital 1.2 V power output (L5003) Backlight power output (Q5007, L5007) Digital and CMOS 1.8 V power output (IC504, L5006) CMOS analog 2.8 V power output (IC503, L5005) BOOST 5 V is output. Feedback for the 5.0 V output is provided to the switching controller (Pin (B7) of IC501) so that PWM control can be carried out. 4. Digital 3.25 V Power Output VDD3 is output. Feedback for the VDD3 is provided to the swiching controller (Pin (F3) of IC501) so that PWM control can be carried out. 5. Digital 1.2 V Power Output 2. Switching Controller (IC501) VDD 1.2 is output. Feedback for the 1.2 V is provided to the switching controller (Pin (C3) of IC501) so that PWM control to be carried out. This is the basic circuit which is necessary for controlling the power supply for a PWM-type switching regulator, and is provided with seven built-in channels, only CH1 (motor system), CH2 (digital 3.25 V), CH3 (digital 1.2 V) and CH7 (backlight) are used. Each power supply output is received, and the PWM duty is varied so that each one is maintained at the correct voltage setting level. Feedback for the backlight power (CH7) is provided to the both ends voltage of registance so that regular current can be controlled to be current that was setting. 6. Backlight Power Supply output Regular current is being transmitted to LED for LCD backlight. Feedback for the both ends voltage of registance that is being positioned to in series LED are provided to the switching controller (Pin (C4) of IC501) so that PWM control to be carried out. 7. Digital and CMOS 1.8 V Power Output VDD 1.8 is output. Feedback for the VDD 1.8 is provided to the switching controller (Pin (3) of IC504) so that PWM control to be carried out. 2-1. Short-circuit protection circuit If output is short-circuited for the length of time determined by the condenser which is connected to Pin (A6) of IC501, all output is turned off. To reset, momentarily set the control signal (P ON) to repeat control, or temporarily disconnect the input power supply. 8. CMOS Analog 2.8 V Power Output VAA 2.8 is output. Feedback for the VAA 2.8 is provided to the switching controller (Pin (3) of IC503) so that PWM control to be carried out. –6– 1-4. ST1 STROBE CIRCUIT DESCRIPTION 1. Charging Circuit 2. Light Emission Circuit When UNREG power is supplied to the charge circuit and the CHG signal from microprocessor becomes High (3.3 V), the charging circuit starts operating and the main electorolytic capacitor is charged with high-voltage direct current. However, when the CHG signal is Low (0 V), the charging circuit does not operate. When FLCTL signal is input from the ASIC, the stroboscope emits light. 2-1. Emission control circuit 1-1. Charge switch When the FLCLT signal is input to the emission control circuit, Q5402 switches on and preparation is made to the light emitting. Moreover, when a FLCLT signal becomes Lo, the stroboscope stops emitting light. When the CHG signal switches to Hi, IC541 starts charging operation. 2-2. Trigger circuit The Q5402 is turned ON by the FLCLT signal and light emission preparation is preformed. Simultaneously, high voltage pulses of several kV are emitted from the trigger coil and applied to the light emitter. 1-2. Power supply filter C5401 constitutes the power supply filter. They smooth out ripples in the current which accompany the switching of the oscillation transformer. 2-3. Light emitting element 1-3. Oscillation circuit When the high-voltage pulse form the trigger circuit is applied to the light emitting part, currnet flows to the light emitting element and light is emitted. This circuit generates an AC voltage (pulse) in order to increase the UNREG power supply voltage when drops in current occur. This circuit generates a drive pulse with a frequency of approximately 200-300 kHz, and drive the oscillation transformer. Beware of electric shocks. 1-4. Oscillation transformer The low-voltage alternating current which is generated by the oscillation control circuit is converted to a high-voltage alternating current by the oscillation transformer. 1-5. Rectifier circuit The high-voltage alternating current which is generated at the secondary side of T5401 is rectified to produce a highvoltage direct current and is accumulated at electrolytic capacitor C5412. 1-6. Charge monitoring circuit The functions programmed in the IC541 monitor oscillations and estimate the charging voltage. If the voltage exceeds the rated value, charging automatically stops. Then, the ZCHG_DONE signal is changed to Lo output and a "charging stopped" signal is sent to the microcomputer. –7– 1-5. SYA CIRCUIT DESCRIPTION 1. Configuration and Functions For the overall configuration of the SYA block, refer to the block diagram. The SYA block centers around a 8-bit microprocessor (IC301), and controls camera system condition (mode). The 8-bit microprocessor handles the following functions. 1. Operation key input, 2. Clock control and backup, 3. Power ON/OFF, 4. Storobe charge control Outline Pin Signal I/O 1 ASIC_SCK O Serial clock output (CL required) 2 ZCARD I Card detection (SW3.2 V required) 3 ZBACKUPCTL O Backup battery charge control 4 CHG_CNT O Camera charge permission 5 HOT LINE I Hot line request from ASIC 6 GREEN_LED O Switch unit LED (green) (H= lighting) 7 RED_LED O Switch unit LED (red) (H= lighting)/ combine with UTX (CL required) 8 ST_CHG_ON O Strobo charge control (H= charge) 9 10 VDD2 - - VSS2 - - 11~14 SCAN IN4~1 I Keyscan input 4~1 15 ZUSB_DET I USB power detection terminal (L= detection) 16 HDMI_HPD I HDMI hot plug detection 17 ZCHG_DONE I Main condensor charge voltage detection TIMEOUT I Charge done detection 19 BAT_UTX O Battery power detection IC UART sending 20 BAT_URX I Battery power detection IC UART recieving 21 SCAN_IN0 I Keyscan input 0 22 PANEL_OPEN I Panel open detection (MR sensor) 23 KEY 2nd I S2 key input 18 24 USB_ON O USB charge ON/OFF 25 NOT USED I (HDMI_INT delete) 26 NOT USED O (TGVD delete) 27 MRST O System reset (MRST) 28 SW3.2ON O SW 3.2 V power (L= 3.2 V) 29 PON2 O Digital system power start-up signal 30 NOT USED I (I2CSDATA delete) 31 P ON O Digital system power start-up signal 32 NAND_RESET O OneNAND reset 33 PLLEN O PLL enable signal 34 ERR I Charge error detection 35 VSS3 - - 36 VDD3 - - 37 RDSEL I Debugger select terminal 38 CLK (SFW) I Debug CN 39 DATA0 (SFW) I Debug CN 40 DC_IN I DC jack insertion detection (SW3.2 V required) 41 HINGE I Panel rotation detection 42~44 SCAN OUT2~0 O Keyscan output 2~0 45 ZOOM_SW_AD I Zoom key AD input 46 NOT USED - - 47 ZAV_JACK I Cable detection See next page → –8– 48 BAT_TMP I Battery temperature detection 49 BAT_OFF I Battery OFF detection signal input 50 ZSREQ I Serial communication request signal (CL required) 51 S1 key input KEY_1st I 52 ZBOOT_COMREQ I/O 53 54 ZRESET XCIN I I 55 XCOUT O 32 k oscillation output 56 VSS1 XIN I - O 59 XOUT VDD1 - 4M oscillation output - 60 BATTERY I UNREG voltage detection 61 NOT USED - - 62 INT_TEMP I Camera temperature detection 63 ASIC_SDI O Serial data output (CL required) 64 ASIC_SDO I Serial data input (CL required) 57 58 ZBOOT output SBM reset input 32 k oscillation input 4M oscillation input Table 5-1. 8-bit Microprocessor Port Specification 2. Internal Communication Bus The SYA block carries out overall control of camera operation by detecting the input from the keyboard and the condition of the camera circuits. The 8-bit microprocessor reads the signals from each sensor element as input data and outputs this data to the camera circuits (ASIC) or to the LCD display device as operation mode setting data. Fig. 5-1 shows the internal communication between the 8-bit microprocessor, ASIC and SPARC lite circuits. PLLEN SREQ ASIC_SDO 8-bit Microprocessor ASIC ASIC_SDI ASIC_SCK MRST Fig. 5-1 Internal Bus Communication System 3. Key Operaiton For details of the key operation, refer to the instruction manual. SCAN IN 0 1 2 3 4 0 UP DOWN LEFT RIGHT SET 1 - VREC PLAY MENU POWER 2 PW_TEST - TEST - - SCAN OUT Table 5-2. Key Operation –9– 4. Power Supply Control The 8-bit microprocessor controls the power supply for the overall system. The following is a description of how the power supply is turned on and off. When the battery is attached or DC IN input, a regulated 3.2 V (power off: 2.4 V) voltage is normally input to the 8-bit microprocessor (IC301) by IC302, so that clock counting and key scanning is carried out even when the power switch is turned off, so that the camera can start up again. When the battery is removed and DC IN does not input, the 8-bit microprocessor operates in sleep mode using the backup battery. At this time, the 8-bit microprocessor only carries out clock counting, and waits in standby for the battery to be attached again or DC IN input. When a switch is operated, the 8-bit microprocessor supplies power to the system as required. The 8-bit microprocessor first set the P ON signal at pin (31) and the P ON2 signal at pin (29) to high, and then turns on the DC/ DC converter. After this, low signal is output from pin (27) so that the ASIC is set to the reset condition. After this these pins set to high, and set to active condition. Once it is completed, the ASIC returns to the reset condition, all DC/DC converters are turned off and the power supply to the whole system is halted. ASIC, memory CMOS 2.8 V (A) 8 bit CPU Power voltage 3.3 V 1.0 V 1.8 V Power OFF OFF OFF 32KHz Power switch ON - Auto power OFF OFF OFF 32KHz LCD finder ON ON 4 MHz ON OFF 4 MHz 2.8 V (D), 1.8 V (D) 3.2 V CAMERA Play back Table 5-3. Camera Mode Note) 4 MHz = Main clock operation, 32 kHz = Sub clock operation – 10 – MEMO – 11 – 2. DISASSEMBLY 2-1. REMOVAL OF CABINET BOTTOM, CABINET TOP, CABINET BACK, TB4 BOARD AND CABINET FRONT 28 A When assembling, assemble order. D A 41 36 B 24 40 39 25 31 30 38 When assembling, 37 34 32 20 A tighten the screws order. a→b→c 27 A→B assemble order. A→B When assembling, 35 c 23 26 33 b 18 3 26 54 19 55 D B 29 a F E 22 A I 6 49 F 45 H 47 H C E 48 17 4 I 43 21 B 44 G 52 a 46 42 12 15 G 16 13 3 B 52 5 B 50 b 21 14 c C 51 A 8 9 2 7 1 8 tighten the screws order. a→b→c When assembling, 11 10 When assembling, 53 assemble order. A→B NOTE: Discharge a strobe capacitor with the discharge jig (VJ8-0188) for electric shock prevention. – 12 – 1. Cover battery 49. Dec joint 2. Spacer bottom 3. Spacer LCD 50. Two screws 1.7 x 4 51. Screw 1.7 x 3 4. Spacer LCD front 5. Screw 1.7 x 7 52. Two screws 1.7 x 3 53. Compl, cabinet front 6. Three screws 1.7 x 3 7. Screw 1.7 x 3 54. Screw 1.7 x 3 55. Screw 1.7 x 3 46. Spacer shield wire 8. Three screws 1.7 x 4 9. Remove the cabi bottom from the main body. 10. Screw 1.7 x 3 11. Holder strap front 12. Spacer blind 13. Screw 1.7 x 3 14. Holder strap back 15. Two screws 1.7 x 4 16. Stand 17. Remove the solder. 18. Screw 1.7 x 3 19. Screw 1.7 x 3 42. Spacer mic 20. Cabinet top 21. Spacer cabi front 22. Flexible pwb CP1 & TB4 23. Cover SD 24. Screw 1.7 x 3 25. Two screws 1.7 x 3 26. Two screws 1.7 x 3 27. Remove the cabinet back from the main body. 28. Cover DC 29. Three screws 1.7 x 4 30. Holder back 31. Two screws 1.7 x 4 32. TB4 board 33. FPC 34. Unit, zoom 35. Flexible pwb CP1 & TB4 53. Compl, cabinet front 36. Button select 37. Holder button bas 38. Button menu 39. Button rec play 40. Button movie 41. Button shutter 42. Spacer mic 43. Remove the solder. Note: 44. Two screws 1.7 x 4 45. Holder bottom Do not tuck the lead wires. 46. Spacer shield wire 47. Connector 48. Two screws 1.7 x 2 – 13 – 2-2. REMOVAL OF TB1 BOARD, LENS, ST1 BOARD, CP1 BOARD AND TB3 BOARD When assembling, tighten the screws order. a 1 3 b a→b→c 12 13 23 4 c b B H C 2 23 B A 27 26 A c 28 11 10 D E a 25 When assembling, tighten the screws order. 21 15 23 K 19 a→b→c D 14 7 b I F 9 6 c 22 18 50 16 a 45 8 17 44 46 16 C a 49 39 46 a→b→c→d 48 47 J 43 F 29 K 42 H E J 40 41 d d 31 38 32 I 5 When assembling, tighten the screws order. 30 40 36 33 G 34 G 35 37 – 14 – 20, 24 19 1. Three screws 1.7 x 3 2. Connector 48. Three screws 1.7 x 2.5 49. TB3 board 3. TB1 board 4. Three screws 1.7 x 2.5 50. Chassis right 5. Two screws 1.7 x 3 6. Screw 1.7 x 4 35. Assy lamp dressing method 7. Screw 1.7 x 3 8. Two screws 1.7 x 3 9. Heat sink CMOS 10. Holder TB1 11. Spacer CA 12. Screw 1.7 x 2.5 13. Holder CA 14. FPC 15. Connector 16. Two screws 1.7 x 4 17. Two screws 1.7 x 4 18. Holder lens chassis 26. Heat sink tape CMOS 19. Holder lens 20. Remove the lens part. 35. Assy lamp soldering order 21. Holder lens 22. Spacer lens bottom 23. Three screws 1.4 x 3.5 24. Lens 25. Screw 1.7 x 2 26. Heat sink tape CMOS 27. Holder heat CMOS TB1 28. Assy, flexible pwb CA1 + mounting lens 29. Two screws 1.7 x 7 30. Screw 1.7 x 3 31. Connector 32. ST1 board 33. Spacer ST1 34. Remove the solder. 35. Assy, lamp 39, 42. Flexible pwb CP1 & TB3 36. Cover triger 37. Remove the solder. 38. Spacer con ST1 39. Flexible pwb CP1 & TB3 40. Four screws 1.7 x 3 41. CP1 board 42. Flexible pwb CP1 & TB3 43. Heat sink rub ASIC 44. Screw 1.4 x 2 45. Earth jack 46. Two screws 1.7 x 3 47. Chassis bottom – 15 – 2-3. REMOVAL OF TB2 BOARD, VF1 BOARD AND LCD 1. Screw 1.7 x 2 12. Remove the solder. 17. Spacer LCD FPC 20. VF1 board 2. Screw 1.7 x 3 3. Holder wire 13. Connector 14. Assy, joint 18. FPC 19. Two screws 1.7 x 3 21. Spacer pwb 22. Holder LCD 4. Spacer holder joint 5. Two screws 1.7 x 3 15. Screw 1.7 x 2 16. TB2 board 23. LCD 24. Cover LCD front 24 6. Holder joint 7. Cabinet right 23 8. Button power 9. Cover joint 22 10. Two screws 1.7 x 3 11. Cover LCD back When assembling, assemble order. A→B 21 19 When assembling, assemble order. 18 B 1 A 14 A→B 17. Spacer LCD FPC 17 19 12 13 B 9 20 A 11 A 15 A 16 10 8 3 4 7 2 6 5 4. Spacer holder joint 3. Holder wire – 16 – 2-4. BOARD LOCATION TB4 board TB1 board TB3 board VF1 board CP1 board TB2 board ST1 board – 17 – 3. ELECTRICAL ADJUSTMENT 3-3. Adjustment Items and Order 3-1. Table for Servicing Tools Number Part code Name Ref. No. J-1 Pattern box J-2 Calibration software 1 J-3 Chroma meter 1 VJ8-0192 J-4 Spare lump (pattern box) 1 VJ8-0191 J-5 Discharge jig 1 VJ8-0188 J-6 Collimator 1 VJ8-0260 J-7 Spare lump (collimator) 1 VJ8-0282 J-8 Siemens star chart 1 J-9 Fluorescent tube viewer 1 1 VJ8-0190 1. Optical Axis Adjustment 2. Lens Adjustment (Infinity) 3. Lens Adjustment (1m) 4. AWB Adjustment 5. CMOS White Point Defect Detect Adjustment 6. CMOS Black Point And White Point Defect Detect Adjustment In Lighted Note: If the lens, board and changing the part, it is necessary to adjust again. Item 1-6 adjustments should be carried out in sequence. *Adjustment environment Temperature: 25 ± 10 degrees, Humidity: 55 ± 25 % 3-4. Setup J-9: Fluorescent tube viewer: HAKUBA light viewer 5700 Download the calibration software and the firmware from the following URL. http://www.digital-sanyo.com/overseas/service/ Place the DscCalDi.exe file, camapi32.dll file and QrCodeInfo.dll file together into a folder of your choice. J-1 J-3 1. System requirements Windows 2000 or XP or Vista IBM R -compatible PC with pentium processor USB port 40 MB RAM Hard disk drive with at least 15 MB available VGA or SVGA monitor with at least 256-color display 2. Pattern box Turn on the switch and wait for 30 minutes for aging to take place before using Color Pure. It is used after adjusting the chroma meter (VJ8-0192) adjust color temperature to 3100 ± 20 K and luminosity to 900 ± 20 cd/m2. Be careful of handling the lump and its circumference are high temperature during use and after power off for a while. 3. Computer screen during adjustment J-4 Calibration J-5 AWB Upload Firmware Focus Data LCD R Bright B Bright VCOMDC RGB Offset Gain VCOMPP Tint Phase UV Matrix Cal Mode PAF Cal. OK Cal Data EVF VCO H AFC LCD Type Hall Cal. Test OK Setting Language USB storage Get VID Set PID J-8 Backrush pulse : Get Set Serial Set Rev. Set Set Video Mode Set Factory Code 3-5. Connecting the camera to the computer 3-2. Equipment 1. AC adaptor 2. PC (IBM R -compatible PC, Windows 2000 or XP or Vista) 1. Use the supplied dedicated USB interface cable to connect the camera to the computer. 2. Turn on the camera. 3. Choose the “COMPUTER”, and press the SET button. Next, choose the “CARD READER”, and press the SET button. – 18 – 3-6. The adjustment item which in necessary in part exchange Optical Lens Lens Axis Adjust- AdjustAdjustment ment ment (Infinity) (1 m) CMOS CMOS Black USB AWB White Point Point And Factory White Point Language storage Reset Defect AdjustCord Defect Detect Setting information Setting Detect ment Adjustment Setting registration Adjustment In Lighted COMPL PWB CP1 COMPL PWB VF1 COMPL PWB ST1 COMPL PWB TB1 COMPL PWB TB2 COMPL PWB TB3 COMPL PWB TB4 ASSY, FLEXIBLE PWB CA1 : Be sure to carry out the necessary adjustments after replacing the unit. : Adjustment is possible from the menu setting screen of the camera and by using the calibration software. 3-7. Updating the firmware Check the firmware version immediately after the CP1 board has been replaced. If an old version is being used, interference and errors in operation may also occur. If an old version is being used, update it with a newer version. Refer to 3-13. Firmware uploading procedure. (Page 23) 3-8. Adjust Specifications 1. Optical Axis Adjustment Adjustment method: 1. Set a distance of 1.0-3.0 cm between the camera lens and the white part of fluorescent tube viewer. (Do not enter any light.) 2. Double-click on the DscCalDi.exe. 3. Input “251” to the “CalMode”, and click the OK. 4. Adjustment value will appear on the screen. 5. Click the OK. 2. Lens Adjustment (Infinity) Fluorescent tube viewer Camera 1.0~3.0 cm Preparation: POWER switch: ON Note: Do not vibrate during the adjustment. Camera Collimator – 19 – Preparation: POWER switch: ON If using a ready-made collimator, set to infinity. Note: Do not vibrate during the adjustment. If readjusting after it has already been adjusted, wait for 15 minutes or more for the unit to cool down first. Adjustment method: 1. Set the camera so that it becomes center of the siemens star chart in the collimator (zoom wide and tele). (Set a distance of 0.5-1.0 cm between camera lens and collimator lens. Do not touch the each lens.) 2. Set the camera so that it becomes center of the screen in the collimator. 3. Double-click on the DscCalDi.exe. 4. Select “Infinity Cal.” on the LCD “Test”, and click the “Yes”. 5. Lens infinity adjustment value will appear on the screen. 6. Click the OK. 3. Lens Adjustment (1m) is carried out after this adjustment. x Dsc Calibration OK Copy Infinity calibration : PZ_SW: -20 AF_I_WIDE: 24 AF_I_MID1: 23 AF_I_MID2: 23 AF_I_MID3: 23 AF_I_MID4: 14 AF_I_MID5: 5 AF_I_MID6: -4 AF_I_MID7: 17 AF_I_MID8: -14 AF_I_TELE: 7 IRIS_GAIN: -110 IRIS_OFFSET: -3 Adjustment value determination is effectuated using below values. The adjustment values fulfill the conditions below, they are determined as within specifications. Adjustment value determination PZ_SW: ZSW ZSW: adjustment value of zoom PI switch position (-52<=ZSW<=34) AF_I_WIDE: ZIW ZIW: infinity adjustment value of focus at zoom position wide (–77<=ZIW<=78) AF_I_MID1: ZIM1 ZIM1: infinity adjustment value of focus at zoom position middle1 (–96<=ZIM1<=96) AF_I_MID2: ZIM2 ZIM2: infinity adjustment value of focus at zoom position middle2 (–115<=ZIM2<=114) AF_I_MID3: ZIM3 ZIM3: infinity adjustment value of focus at zoom position middle3 (–138<=ZIM3<=137) AF_I_MID4: ZIM4 ZIM4: infinity adjustment value of focus at zoom position middle4 (–194<=ZIM4<=195) AF_I_MID5: ZIM5 ZIM5: infinity adjustment value of focus at zoom position middle5 (–237<=ZIM5<=238) AF_I_MID6: ZIM6 ZIM6: infinity adjustment value of focus at zoom position middle6 (–288<=ZIM6<=287) AF_I_MID7: ZIM7 ZIM7: infinity adjustment value of focus at zoom position middle7 (–348<=ZIM7<=348) AF_I_MID8: ZIM8 ZIM8: infinity adjustment value of focus at zoom position middle8 (–471<=ZIM8<=470) AF_I_TELE: ZIT ZIT: infinity adjustment value of focus at zoom position tele (–200<=ZIT<=598) IRIS_GAIN: g g: adjustment value of gain (-128<=g<=127) IRIS_OFFSET: o o: adjustment value of offset (-128<=o<=127) 3. Lens Adjustment (1m) Camera 100 0.5 cm Siemens star chart Preparation: POWER switch: ON Adjustment condition: Siemens star chart (A3) Fluorescent light illumination with no flicker Illumination above the subject should be 700 lux ± 10%. Note: Do not vibrate during the adjustment. If readjusting after it has already been adjusted, wait for 15 minutes or more for the unit to cool down first. – 20 – Adjustment method: 1. Set the siemens star chart 100 ± 0.5 cm from lens surface so that it becomes center of the screen (zoom wide and tele). Set the camera and the chart in a straight, and do not put optical systems (mirror and conversion lens etc.) 2. Double-click on the DscCalDi.exe. 3. Click the “Focus”, and Click the “Yes”. 4. Lens adjustment value will appear on the screen. 5. Click the OK. 4. AWB Adjustment x DscCalDi ! AF_MID8: ZM8 ZM8: adjustment value of focus at zoom position middle8 (–286<=ZM8<=286) AF_TELE: ZT ZT: adjustment value of focus at zoom position tele (–306<=ZT<=306) Focus Result AF_TEMP_AD: 479 AF_WIDE: 9 AF_MID1: 11 AF_MID2: 15 AF_MID3: 25 AF_MID4: 26 AF_MID5: 24 AF_MID6: 19 AF_MID7: 22 AF_MID8: 22 AF_TELE: 17 Camera Pattern box (color viewer) OK Adjustment value determination is effectuated using below values. The adjustment values fulfill the conditions below, they are determined as within specifications. Adjustment value determination AF_TEMP_AD: ATAD ATAD: adjustment value of focus temperature A/D (264<ATAD<837) AF_WIDE: ZW ZW: adjustment value of focus at zoom position wide (–77<=ZW<=78) AF_MID1: ZM1 ZM1: adjustment value of focus at zoom position middle1 (–96<=ZM1<=96) AF_MID2: ZM2 ZM2: adjustment value of focus at zoom position middle2 (–118<=ZM2<=117) AF_MID3: ZM3 ZM3: adjustment value of focus at zoom position middle3 (–147<=ZM3<=97) AF_MID4: ZM4 ZM4: adjustment value of focus at zoom position middle4 (–199<=ZM4<=148) AF_MID5: ZM5 ZM5: adjustment value of focus at zoom position middle5 (–234<=ZM5<=213) AF_MID6: ZM6 ZM6: adjustment value of focus at zoom position middle6 (–240<=ZM6<=241) AF_MID7: ZM7 ZM7: adjustment value of focus at zoom position middle7 (–259<=ZM7<=230) Preparation: POWER switch: ON Setting of pattern box: Color temperature: 3100 ± 20 (K) Luminance: 900 ± 20 (cd/m2) Adjusting method: 1. Set a distance of 0.5-1.0 cm between the pattern box and the camera. (Do not enter any light.) 2. Double-click on the DscCalDi.exe. 3. Click the AWB, and click the Yes. 4. AWB adjustment value will appear on the screen. 5. Click the OK. x Dsc Calibration OK Copy AWB Results: 1: WB=216,503,658 CHECK=128,128,146 WB_FS=262,486,455 CHECK_FS=128,128,133 IRIS_PWM1=190,157 IRIS_PWM2=142,126 IRIS_PWM3=118,104 IRIS_PWM4=91 MS=2796,1291 MS_M=2301,2055 MS_C=1843,1781 MS_C2=1737,1705 MS_C3=1709,1674 MS_C4=1577,1506 MS_C5=1415 MS_Z=3008,1291 MS_M_Z=2403,2081 MS_C_Z=1841,1781 MS_C2_Z=1737,1705 MS_C3_Z=1709,1674 MS_C4_Z=1577,1502 MS_C5_Z=1415 MS_Z2=3153,1291 MS_M_Z2=2735,2524 MS_C_Z2=2320,2241 MS_C2_Z2=2141,2029 MS_C3_Z2=1901,1744 MS_C4_Z2=1577,1509 MS_C5_Z2=1415 Fno_FOR_ISO=-1 SS_FOR_ISO=-1 YLEVEL_FOR_ISO=-1 When all of the AWB adjustment screen is not displayed, use a scroll bar. – 21 – Adjustment value determination is effectuated using the “CHECK", “CHECK_FS”, "MS", “MS_M”, “MS_C”, “MS_C2”, “MS_C3”, “MS_C4”, “MS_C5”, “MS_Z”, “MS_M_Z”, “MS_C_Z”, “MS_C2_Z”, “MS_C3_Z”, “MS_C4_Z”, “MS_C5_Z”, “MS_Z2”, “MS_M_Z2”, “MS_C_Z2”, “MS_C2_Z2”, “MS_C3_Z2”, “MS_C4_Z2”, “MS_C5_Z2”, “IRIS_PWM1”, “IRIS_PWM2”, “IRIS_PWM3” and “IRIS_PWM4” values. If CHECK = wc0, wc1, wc2 CHECK_FS = wnc0, wnc1, wnc2 MS = ms1, ms2 MS_M = ms3, ms4 MS_C = ms5, ms6 MS_C2 = ms7, ms8 MS_C3 = ms9, ms10 MS_C4 = ms11, ms12 MS_C5 = ms13 MS_Z = ms14, ms15 MS_M_Z = ms16, ms17 MS_C_Z = ms18, ms19 MS_C2_Z = ms20, ms21 MS_C3_Z = ms22, ms23 MS_C4_Z = ms24, ms25 MS_C5_Z = ms26 MS_Z2 = ms27, ms28 MS_M_Z2 = ms29, ms30 MS_C_Z2 = ms31, ms32 MS_C2_Z2 = ms33, ms34 MS_C3_Z2 = ms35, ms36 MS_C4_Z2 = ms37, ms38 MS_C5_Z2 = ms39 IRIS_PWM1 = s1, s2 IRIS_PWM2 = s3, s4 IRIS_PWM3 = s5, s6 IRIS_PWM4 = s7 the adjustment values fulfill the conditions below, they are determined as within specifications. Adjustment value determination wc0=128 ± 2, wc1=128 ± 2, wc2<=255 wnc0=128 ± 2, wnc1=128 ± 2, wnc2<=255 2090<=ms1<=3500, 990<=ms2<=1620, 1860<=ms3<=2730, 1680<=ms4<=2440, 1510<=ms5<=2210, 1430<=ms6<=2150, 1380<=ms7<=2100, 1370<=ms8<=2080, 1370<=ms9<=2080, 1350<=ms10<=2060, 1230<=ms11<=1940, 1150<=ms12<=1870, 1040<=ms13<=1760, 2400<=ms14<=3800, 990<=ms15<=1620, 1990<=ms16<=3000, 1730<=ms17<=2500, 1510<=ms18<=2210, 1430<=ms19<=2150, 1380<=ms20<=2100, 1370<=ms21<=2080, 1370<=ms22<=2080, 1350<=ms23<=2060, 1230<=ms24<=1940, 1150<=ms25<=1870, 1040<=ms26<=1760, 2400<=ms27<=3910, 990<=ms28<=1620, 2120<=ms29<=3320, 1970<=ms30<=3030, 1860<=ms31<=2780, 1820<=ms32<=2650, 1730<=ms33<=2560, 1640<=ms34<=2480, 1520<=ms35<=2360, 1360<=ms36<=2200, 1230<=ms37<=1940, 1150<=ms38<=1870, 1040<=ms39<=1760 s1>s2>s3>s4>s5>s6>s7 Adjustment values other than the above are irrelevant. 5. CMOS White Point Defect Detect Adjustment Preparation: POWER switch: ON Adjustment method: 1. Double-click on the DscCalDi.exe. 2. Select “CCD Defect” on the LCD “Test”, and click the “Yes”. 3. After the adjustment is completed, OK will display. 4. Click the OK. 6. CMOS Black Point And White Point Defect Detect Adjustment In Lighted Camera Pattern box (color viewer) Preparation: POWER switch: ON Setting of pattern box: Color temperature: 3100 ± 20 (K) Luminance: 900 ± 20 (cd/m2) Adjusting method: 1. Set a distance of 0.5-1.0 cm between the pattern box and the camera. 2. Double-click on the DscCalDi.exe. 3. Select “CCD Black” on the LCD “Test”, and click the “Yes”. 4. After the adjustment is completed, the number of defect will appear. 5. Click the OK. – 22 – 3-9. Factory Code Setting 3-13. Firmware uploading procedure 1. Check the "Factory Code" display within the Setting group. 2. For U.S.A., Canada and NTSC general area If "FC_SANYO_U" does not appear, click on the " " mark located on the right of the "Factory Code" display BOX and select "FC_SANYO_U". 3. For Europe and PAL general area If "FC_SANYO_EX" does not appear, click on the " " mark located on the right of the "Factory Code" display BOX and select "FC_SANYO_EX". 1. Uploading the firmware should be carried out if the version number (COMPL PWB XX-X) on the replacement circuit board is lower than the version of the distributed firmware. For XX-X, enter the name of the circuit board containing the firmware. 2. The firmware is distributed by e-mail in self-extracting archive format. Change the extension of the distributed file to .EXE and save it in your preferred folder. 3. When you double-click the saved file, the firmware (binary file) will be saved in the same folder. 4. The firmware must not be distributed without permission. 3-10. Language Setting 1. Click on the " " mark located on the right of the "Language" display BOX. 2. Select language. (Default is English.) 3. End "DscCal" and remove the camera before turning the camera power OFF. Calibration AWB Upload Firmware Focus Data LCD R Bright B Bright VCOMDC RGB Offset Gain VCOMPP Tint Phase UV Matrix Cal Mode PAF Cal. OK Cal Data EVF VCO H AFC LCD Type Hall Cal. Test OK Setting Language USB storage Get VID Set PID Backrush pulse : Get Set Serial Set Rev. Set Set Video Mode Set Factory Code 3-11. Reset Setting Carry out reset settings after replacing CP1 board. 1. Turn on the camera. 2. Set the NORMAL mode, and press the MENU button. 3. Choose the OPTION MENU 3. 4. Choose the RESET SETTINGS, and press the SET button. 5. Select RESET, and press the SET button. 3-12. The Compulsive boot starting method 1. Keep MENU button, SET button, and SHUTTER button depressed while switching on the power. 2. Connect the camera and the computer with USB cable. 1. Overwriting firmware from the SD card Preparation: SD card: SD card with firmware rewritten into the root directory Data: S314Nxxx.BIN (xxx: version) Overwriting method: 1. Insert the above SD card. 2. Turn on the camera. 3. Set the NORMAL mode. 4. Press the MENU button. 5. Choose the OPTION MENU 3. 6. Choose the FORMAT. 7. Toggle the SET button to the left for 2 seconds. FIRMWARE UPDATE will display. 8. Choose YES. 9. Press the SET button. Update is starting. Note: Do not turn off the camera’s power or remove the SD card while the firmware is being updated. The power will turn off after the update is complete. 2. Overwriting firmware from the calibration software Preparation: PC with overwriting firmware copied to the preferred folder in the HD. Data: S314Nxxx.BIN (xxx: version) Overwriting method: 1. Connect the camera’s USB/AV terminal to the computer’ USB connector. 2. The USB Connection screen appears on the camera’s LCD monitor. Choose the “COMPUTER”, and press the SET button. Next, choose the “CARD READER”, and press the SET button. 3. Double-click on the DscCalDi.exe. 4. Click the Firmware. 5. Choose the fimware file to use for overwriting, and click the Yes. 6. Update is starting. The message will appear, and choose OK. 7. After the update is complete, disconnect the USB cable and turn the camera’s power off. Note: Do not turn off the camera’s power while the firmware is being updated. – 23 – 4. USB STORAGE INFORMATION REGISTRATION USB storage data is important for when the camera is connected to a computer via a USB connection. If there are any errors in the USB storage data, or if it has not been saved, the USB specification conditions will not be satisfied, so always check and save the USB storage data. Preparation: POWER switch: ON Adjustment method: 1. Connect the camera to a computer. (Refer to 3-5. Connecting the camera to the computer on the page 18.) 2. Double-click on the DscCalDi.exe. 3. Click on the Get button in the USB storage window and check the USB storage data. VID: SANYO PID: TH1 Serial: Rev. : 1.00 4. Check the “Serial” in the above USB storage data. If the displayed value is different from the serial number printed on the base of the camera, enter the number on the base of the camera. Then click the Set button. 5. Next, check VID, PID and Rev. entries in the USB storage data. If any of them are different from the values in 3. above, make the changes and then click the corresponding Set button. Calibration AWB Upload Firmware Focus Data LCD R Bright B Bright VCOMDC RGB Offset Gain VCOMPP Tint Phase UV Matrix Cal Mode PAF Cal. OK Cal Data EVF VCO H AFC LCD Type Hall Cal. Test OK Setting Language USB storage Get VID Set PID Backrush pulse : Get Set Serial Set Rev. Set Set Video Mode Set Factory Code – 24 – 5. TROUBLESHOOTING GUIDE POWER LOSS INOPERTIVE TAKING INOPERATIVE PUSH SHUTTER BUTTON PUSH THE POWER SW FOR A WHILE NO IC301-43 INPUT IC301-23, 51 KEY INPUT CHECK POWER SW IC501-D6, F6 (PON) IC504-4 (PON2) Q5004-1 (PAON1) IC503-4(PAON2) LOW CHECK IC302 HIGH IC301-53 (RESET) CHECK IC302 SERIAL COMMUNICATION LOW OK CHECK IC302 CHECK CP1 DMA BLOCK HIGH IC301-55 OSCILLATION NO CHECK X3002 YES CHECK IC301 NO PICTURE IC101-AE12 (XOUT) CHECK OSCILLATION NG MAIN CLOCK FOR SYSTEM OPERATION NO OPERATION IF ABSENT CHECK X1102 OSCILLATOR NG INCORRECT HANDSHAKING BETWEEN 8-BIT CPU AND ASIC CHECK EACH INTERFACE OK IC301-63, 64 (ASIC_SDO, ASIC_SDI) LOW CHECK IC101, IC301, PWA BLOCK, CAA BLOCK HIGH LOW HIGH IC301-49 (BAT OFF) CHECK UNIT SW YES YES IC301-9, 36, 59 (VDD) NO OK CHECK SOLDERING OF MEMORY EACH PIN – 25 – NG CHECK IC301, CP1 DMA BLOCK 6. PARTS LIST PACKING MATERIALS ACCESSORIES LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. 7001 636 122 9296 Note: Refer to the table of accessories. 7001 636 122 9289 7001 7002 7003 7004 636 126 2040 636 122 9326 636 077 8139 636 123 6843 7004 636 123 6836 7005 636 083 6532 7005 636 094 2158 7006 636 126 2057 CARTON INNER-SG314/EX VPC-TH1EX,VPC-TH1GX,VPC-TH1EXR, VPC-TH1GXR,VPC-TH1EXBL,VPC-TH1GXBL CARTON INNER-SG314/U VPC-TH1,VPC-TH1R,VPC-TH1BL CARTON INNER-SG314/U4 VPC-ZH1R ONLY REINFORCE PAD,A-SG314/J INNER BOTTOM CUSHION SHEET-SX774/KRO LABEL BLUE MODEL-SG314/U3 VPC-TH1BL,VPC-TH1EXBL,VPC-TH1GXBL LABEL RED MODEL-SG314/U2 VPC-TH1R,VPC-TH1EXR,VPC-TH1GXR LABEL CARTON BLUE-718EX2 VPC-TH1BL,VPC-TH1EXBL,VPC-TH1GXBL LABEL CARTON RED-815/EX2 VPC-TH1R,VPC-TH1EXR,VPC-TH1GXR CARTON INNER2-SG314/U4 VPC-ZH1R ONLY 26 1 2 3 4 OR 5 OR 6 636 124 1403 636 103 1783 636 123 0414 645 099 2780 645 099 2797 645 099 2803 645 099 2810 645 098 8721 OR 645 076 0235 6 645 084 0104 OR 645 098 8714 7 8 9 10 645 095 6034 645 098 9612 636 126 2101 645 099 2834 11 636 127 0755 11 636 123 2159 9051 636 123 5013 9051 636 127 3114 9052 636 123 5020 9053 636 123 5037 9053 636 127 3121 DESCRIPTION STRAP BELT-SG314/U STRAP CAP LENS-SG112/J ASSYL,CAP LENS-SG314 CABLE,DSC USB (Ddicated USB inter face cable) CABLE,DSC USB (Ddicated USB inter face cable) CABLE,DSC A/V (Ddicated AV inter face cable) CABLE,DSC A/V (Ddicated AV inter face cable) CORD,POWER-1.2MK VPC-TH1EX,VPC-TH1EXR,VPC-TH1EXBL CORD,POWER-1.5MK VPC-TH1EX,VPC-TH1EXR,VPC-TH1EXBL CORD,POWER-1.8MK VPC-TH1,VPC-TH1R,VPC-TH1BL,VPC-ZH1R CORD,POWER-1.9MK VPC-TH1,VPC-TH1R,VPC-TH1BL,VPC-ZH1R ADAPTOR,AC-DC BATTERY,RECHARGE,LI-ION CASE SOFT-SG314/U4 VPC-ZH1R ONLY CABLE,DSC HDMI-TYPE A&C (Mini HDMI cable) VPC-ZH1R ONLY DISC,CD-ROM XSC G314 U4 (N.S.P.) Xacti software,PDF instruction manual(English, French,Spanish) VPC-ZH1R ONLY DISC,CD-ROM XSD G314 U (N.S.P.) Xacti software, PDF instruction manual and quick guide(English, French,German,Spanish,Italian,Dutch,Portuguese, Russian,Turkish,Korean,Traditional chinese, Simplified chinese Note:Turkish is only a quick guide.) EXCEPT VPC-ZH1R INSTRUCTION MANUAL Quick guide(English, French,German,Spanish,Italian,Dutch,Portuguese, Russian) EXCEPT VPC-ZH1R INSTRUCTION MANUAL Quick guide(English, French,Spanish) VPC-ZH1R ONLY INSTRUCTION MANUAL Quick guide(Turkish, Korean,Traditional chinese,Simplified chinese) EXCEPT VPC-ZH1R INSTRUCTION MANUAL Camera/Software (English) EXCEPT VPC-ZH1R INSTRUCTION MANUAL Camera/Software (English) VPC-ZH1R ONLY Table of accessories 1 2 4 5 6 9 7 3 8 10 11 27 CABINET AND CHASSIS PARTS 1 LOCATION PARTSNO. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 636 125 8289 636 122 9395 636 123 0407 636 121 5442 636 121 5350 636 126 0633 636 121 5367 636 125 8685 636 126 2439 636 122 9340 636 121 5428 636 126 0671 636 127 2582 636 123 0315 636 121 5169 15 636 123 0520 15 636 123 0537 16 17 18 19 636 123 0339 645 099 0168 636 121 4940 636 126 2446 LABEL CAUTION-SG217/U ASSY,CABI BOTTOM-SG314 ASSY,COVER BATTERY-SG314/ STAND-SG314/J HOLDER STRAP FRONT-SG314 SPACER BOTTOM-SG314/JO HOLDER STRAP BACK-SG314/J SPACER BLIND-SG314/J SPACER LCD-SG314/J SPACER MIC-SG314/J HOLDER BOTTOM-SG314/J SPACER SHILD WIRE-SG314/J SPACER CABI FRONT-SG314/J COMPL,CABINET FRONT-SG314 DEC JOINT-SG314/J VPC-TH1,VPC-TH1EX,VPC-TH1GX DEC JOINT-SG314/J2 VPC-TH1R, VPC-TH1EXR,VPC-TH1GXR,VPC-ZH1R DEC JOINT-SG314/J3 VPC-TH1BL,VPC-TH1EXBL,VPC-TH1GXBL COMPL,CABINET TOP-SG314 UNIT,ZOOM-SG314/J COVER SD-SG314/J SPACER LCD FRONT-SG314/J 28 LOCATION 20 21 22 23 24 25 26 27 28 29 30 101 102 103 104 105 106 107 108 109 PARTSNO. 636 121 5381 636 122 6356 636 120 9830 636 121 4766 636 121 5916 636 121 4735 636 121 4773 636 121 4759 636 121 4742 636 121 4803 636 121 4964 411 178 9403 411 193 2106 411 194 8206 412 078 7902 411 178 6204 411 218 4405 411 177 9503 411 175 5705 411 184 0005 109 411 194 8404 DESCRIPTION HOLDER BACK-SG314/J FLEXIBLE PWB CP1&TB4SG314 COMPL PWB,TB-4 BUTTON SELECT-SG314/J HOLDER BUTTON BAS-SG314/J BUTTON MENU-SG314/J BUTTON REC PLAY-SG314/J BUTTON MOVIE-SG314/J BUTTON SHUTTER-SG314/J CABINET BACK-SG314/J COVER DC-SG314/J SCR S-TPG PAN PCS 1.7X4.0 SCR S-TPG PAN PCS 1.7X4.0 SCR PAN PCS 1.7X3 SPECIAL SCREW-1.7X3.0 SCR PAN PCS 1.7X4 SCR S-TPG PAN PCS 1.7X7 SCR S-TPG PAN PCS 1.7X3 SCR PAN PCS 1.7X3 SCR PAN PCS 1.7X2.0 VPC-TH1,VPC-TH1EX,VPC-TH1GX SCR PAN PCS 1.7X2.0 EXCEPT VPC-TH1,VPC-TH1EX,VPC-TH1GX CABINET AND CHASSIS PARTS 1 29 D 30 A 28 26 108 23 27 25 101 108 24 20 108 22 17 21 101 16 101 103 18 101 108 9 103 103 108 D E A 103 103 109 15 103 C E 19 11 109 13 B 12 107 105 105 10 9 105 B 101 106 104 8 105 101 107 4 13 7 14 108 C 102 3 6 102 2 103 102 103 5 1 Cabinet 1 SG314/J PARTS LIST 1 29 CABINET AND CHASSIS PARTS 2 LOCATION PARTS NO. 31 32 33 34 35 36 37 38 39 40 41 42 43 44 645 099 2308 404 120 5400 636 068 0265 636 126 0688 636 120 5276 636 121 5251 636 123 3057 636 121 5329 636 121 5183 636 120 9823 636 121 5176 636 121 5107 636 122 6349 636 121 4926 44 636 123 0483 44 636 123 0490 45 46 47 48 49 50 51 52 53 636 121 5336 636 106 6310 636 120 5054 636 121 4780 636 121 5268 636 127 3152 636 121 5411 636 121 4865 636 126 5089 53 636 126 5119 53 636 126 5133 54 55 56 636 127 1608 636 120 9809 636 121 5237 DESCRIPTION LOCATION PARTS NO. ASSY,LAMP-SG314 ELECT 60U A 300V COVER TRIGER-SX612/J SPACER ST1-SG314/J COMPL PWB,ST-1 SPACER CON ST1-SG314/J COMPL PWB,CP-1 F/W HEAT SINK RUB ASIC-SG314 CHASSIS BOTTOM-SG314/J COMPL PWB,TB-3 CHASSIS RIGHT-SG314/J EARTH JACK-SG314/J FLEXIBLE PWB CP1&TB3SG314 COVER JOINT-SG314/J VPC-TH1,VPC-TH1EX,VPC-TH1GX COVER JOINT-SG314/J2 VPC-TH1R, VPC-TH1EXR,VPC-TH1GXR,VPC-ZH1R COVER JOINT-SG314/J3 VPC-TH1BL, VPC-TH1EXBL,VPC-TH1GXBL ASSY,JOINT-SG314/J ASSY,SHIELD WIRE CP1-VF1 COMPL PWB,TB-2 BUTTON POWER-SG314/J HOLDER WIRE-SG314/J SPACER HOLDER JOINT-SG314 HOLDER JOINT-SG314/J CABINET RIGHT-SG314/J ASSY,COVER LCD B-SV-314 VPC-TH1,VPC-TH1EX,VPC-TH1GX ASSY,COVER LCD B-SV-314 VPC-TH1R, VPC-TH1EXR,VPC-TH1GXR,VPC-ZH1R ASSY,COVER LCD B-SV-314 VPC-TH1BL,VPC-TH1EXBL,VPC-TH1GXBL SPACER LCD FPC-SG314/J COMPL PWB,VF-1 SPACER PWB-SG314/J 30 57 58 59 636 121 5404 645 098 7229 636 126 5065 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 101 105 106 107 108 110 111 112 636 127 6085 636 121 5138 636 121 5213 636 105 2207 636 127 1820 645 099 3169 645 099 2520 636 122 4772 636 122 8558 636 127 4050 636 125 7206 636 121 5374 636 121 5282 636 121 5312 636 120 9816 411 178 9403 411 178 6204 411 218 4405 411 177 9503 411 175 5705 411 176 1003 411 181 2705 411 199 0601 112 411 199 0700 113 114 411 184 0005 411 175 5705 114 411 194 8206 115 411 178 0103 DESCRIPTION HOLDER LCD-SG314/J LCD(990000412) ASSY,COVER LCD F-SV-SG314 EXCEPT VPC-ZH1R ASSY,COVER LCD F-SV-SG314 VPC-ZH1R ONLY HEAT SINK CMOS-SG314/J HOLDER LENS CHASSIS-SG314 HOLDER LENS-SG211/J SPACER LENS BOTTOM-SG314 LENS(ASSY) OPTICAL FILTER SPACER SG314 ASSY,FPC CA1 SV-SG314 HEAT SINK TAPE CMOS-SG314 HOLDER HEAT CMOS TB1-314 HOLDER TB1-SG314/J SPACER CA-SG314/J HOLDER CA-SG314/J COMPL PWB,TB-1 SCR S-TPG PAN PCS 1.7X4.0 SCR PAN PCS 1.7X4 SCR S-TPG PAN PCS 1.7X7 SCR S-TPG PAN PCS 1.7X3 SCR PAN PCS 1.7X3 SCR PAN PCS 1.7X2.5 SCR PAN PCS-1.4X2 SCR TIN 1.7X2 EXCEPT VPC-TH1,VPC-TH1EX,VPC-TH1GX SCR TIN 1.7X2 VPC-TH1,VPC-TH1EX,VPC-TH1GX SCR PAN PCS 1.7X2.0 SCR PAN PCS 1.7X3 VPC-TH1,VPC-TH1EX,VPC-TH1GX SCR PAN PCS 1.7X3 EXCEPT VPC-TH1,VPC-TH1EX,VPC-TH1GX SCR S-TPG PAN PCS 1.4X3.5 CABINET AND CHASSIS PARTS 2 110 110 110 108 108 115 73 110 108 C A 72 B B A 69 71 115 70 113 68 66 D 62 65 115 67 E 62 62 64 61 63 D 108 62 F 60 63 59 105 101 101 58 105 42 111 108 108 101 C 57 40 108 41 107 110 110 39 54 112 43 106 45 107 F 56 44 55 106 38 47 37 E 34 46 113 114 48 108 108 108 53 108 35 108 114 36 108 33 52 50 51 49 32 108 Cabinet 2 31 108 50 SG314/J PARTS LIST 2 31 ELECTRICAL PARTS Note: 1. Materials of Capacitors and Resistors are abbreviated as follows ; Resistors Capacitors MT-FILM Metallized Film Resistor MT-POLYEST MT-GLAZE Metallized Glaze Resistor MT-COMPO OXIDE-MT Oxide Metallized Film Resistor TA-SOLID AL-SOLID NP-ELECT OS-SOLID 2. 3. 4. 5. DL-ELECT POS-SOLID Tolerance of Capacitor (10pF over) and Resistor are noted with follow symboles. F ............1% G ............2% J ............5% K ............10% M ..........20% N ..........30% Z ..........+80% ~ -20% Capacitors U : µF P : pF Inductors UH : µH MH : mH N.S.P. : Not available as service parts. LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. COMPL PWB,CP-1 F/W IC504 IC521 IC901 IC902 IC903 IC951 IC952 636 123 3057 Q1301 OR OR Q1302 OR OR Q1902 OR OR Q3001 OR Q3001 Q3003 OR OR Q3005 OR OR OR Q5003 Q5004 Q5007 Q5008 Q5009 OR OR Q5013 Q5014 Q5201 Q5202 Q5203 Q5204 Q9001 Q9002 IC101 IC111 IC121 IC153 IC181 IC182 IC191 IC301 IC302 IC305 IC501 IC503 Metallized Polyester Capacitor Metallized Composite Capacitor Tantalum Solid Capacitor Aluminum Solid Capacitor Non-Polarized Electrolytic Capacitor Aluminum Solid Capacitors with Organic Semiconductive Electrolytic Capacitor Double Layered Electrolytic Capacitor Polymerized Organic Semiconductor Capacitor (SEMICONDUCTORS) 305 168 3703 TR DTC144EM 305 216 1200 TR RN1104MFV 305 172 4703 TR UNR32A3 305 167 0406 TR EMD12 405 218 3902 TR UP0431300 305 216 2108 TR RN4984FE 305 167 0406 TR EMD12 405 218 3902 TR UP0431300 305 216 2108 TR RN4984FE 305 200 9007 TR EML17 305 210 5709 TR UP0KG8D 305 217 3906 TR HN2E07JE 305 167 0406 TR EMD12 405 218 3902 TR UP0431300 305 216 2108 TR RN4984FE 305 166 9509 TR EMH2 305 181 1205 TR NSBC144EDXV6T5 305 186 7301 TR UP04213 00 305 173 4009 TR PEMH2 405 218 4701 TR SSM3J120TU 305 181 4909 TR 2SK3541 405 219 2706 TR MCH5835-E 305 200 6006 TR UP03397 305 168 3703 TR DTC144EM 305 216 1200 TR RN1104MFV 305 172 4703 TR UNR32A3 405 218 2707 TR UPA650TT-A 305 181 4909 TR 2SK3541 405 218 2707 TR UPA650TT-A 305 206 7700 TR SI3473DV-E3 405 218 2707 TR UPA650TT-A 305 181 4909 TR 2SK3541 405 220 5604 TR RUM003N02 405 220 5604 TR RUM003N02 (INTEGRATEDCIRCUITS) 409 696 6301 IC EV3XA BGA (N.S.P.) 409 680 0704 IC AK8113L 410 663 3001 IC K5W1213LCA-AK60 BGA (N.S.P.) 309 675 0101 IC AN13208A LGA (N.S.P.) 309 650 3509 IC TK70630HC-G 409 697 3101 IC AK4649ECB-L BGA (N.S.P.) 410 671 2508 IC TDA9989BET/C1,518 BGA (N.S.P.) 410 655 7604 IC LC87F2924BUFL64TBM-E BGA (N.S.P.) 309 611 7607 IC NJU7286ARB1 409 695 0102 IC MAX17022ETA+ 410 667 4905 IC UPD168805FC-AN2-A BGA (N.S.P.) 409 696 6103 IC XC9235C28CE D1901 D5002 D5003 D5007 D5201 D5202 D5203 D5204 D5301 X1102 X1901 X3002 L1002 L1003 L1005 L1006 L1007 L1301 L1303 L1304 L1501 L1502 L1901 L1902 L5001 L5002 OR L5003 OR L5005 L5006 OR L5007 L5301 OR CB182 CB183 CB301 CB302 CB303 32 DESCRIPTION 409 695 6401 IC XC9235C18CE 409 695 5800 IC MAX8601ETD+ 409 696 6202 IC XC6221B082G 409 690 0909 IC TK70628HC-G 409 690 0909 IC TK70628HC-G 410 676 4507 IC LC898200A-TBM-H BGA (N.S.P.) 409 685 5308 IC XC6221S04XG (DIODES) 407 261 8903 DIODE RB520S-30FJ 307 250 1802 DIODE RB496EA 307 248 0701 DIODE MA21D3800 307 250 0706 DIODE DRB060M-30 307 248 2408 ZENER DIODE EDZ7.5B 307 248 2408 ZENER DIODE EDZ7.5B 307 248 2408 ZENER DIODE EDZ7.5B 307 248 0701 DIODE MA21D3800 307 248 0701 DIODE MA21D3800 (OSCILLATORS) 645 094 0170 OSC,CRYSTAL 48.00000MHZ 645 069 0075 OSC,CERAMIC 12.00MHZ 645 090 3298 OSC,CRYSTAL 32.768KHZ (INDUCTORS) 645 094 0521 IMPEDANCE,33 OHM P 945 053 2666 IMPEDANCE,10 OHM P 645 094 0521 IMPEDANCE,33 OHM P 945 066 4688 IMPEDANCE,30 OHM P 945 053 5476 IMPEDANCE,240 OHM P 645 095 6522 FILTER,EMI 90 OHM 945 053 5414 IMPEDANCE,1000 OHM P 945 053 5414 IMPEDANCE,1000 OHM P 945 070 8627 INDUCTOR,10U M 945 070 8627 INDUCTOR,10U M 645 090 9719 IMPEDANCE,90 OHM M 645 090 9719 IMPEDANCE,90 OHM M 945 066 4688 IMPEDANCE,30 OHM P 645 084 3976 INDUCTOR,4.7U M 645 098 1968 INDUCTOR,4.7U M 645 089 9775 INDUCTOR,2.2U M 645 098 2002 INDUCTOR,2.2U M 645 095 6508 INDUCTOR,4.7U N 645 084 3976 INDUCTOR,4.7U M 645 098 1968 INDUCTOR,4.7U M 645 095 6515 INDUCTOR,6.8U N 645 091 0043 INDUCTOR,4.7U M 645 098 2118 INDUCTOR,4.7U M (CAPACITORS) 403 454 5100 CERAMIC 1U K 10V 403 454 5100 CERAMIC 1U K 10V 303 392 5500 CERAMIC 1U K 6.3V 303 392 5500 CERAMIC 1U K 6.3V 303 391 4306 CERAMIC 0.1U K 16V LOCATION PARTS NO. DESCRIPTION C1001 C1005 C1006 C1010 C1012 C1013 C1017 C1018 C1047 C1048 C1051 C1052 C1053 C1054 C1057 C1058 C1063 C1064 C1065 C1066 C1121 C1122 C1201 C1204 C1205 C1206 C1207 C1208 C1209 C1304 C1506 C1507 C1509 C1510 C1511 C1512 C1513 C1514 C1515 C1801 C1802 C1804 C1805 C1810 C1811 C1812 C1818 C1901 C1902 C1903 C1904 C1905 C1906 C1907 C1908 C1909 C1910 C1911 C3001 C3005 C3006 C3012 C3015 C5001 C5003 C5004 C5005 C5006 C5007 C5021 C5022 C5024 C5031 C5032 C5033 C5036 C5037 CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC CERAMIC 303 311 3501 303 382 2700 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 391 3804 303 311 3303 303 382 2700 303 382 2700 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 314 6509 303 314 6509 303 384 9202 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 343 4705 303 375 0300 403 455 1002 303 391 3804 303 391 3804 303 391 3804 303 419 8903 303 382 2700 303 439 8402 303 382 2700 303 382 2700 303 382 2700 303 343 4705 303 382 2700 303 343 4705 303 343 4705 303 439 8402 303 311 7301 303 382 2700 303 343 4705 303 391 3804 303 391 3804 303 391 3804 303 311 5109 303 311 5109 303 343 4705 303 391 3804 303 343 4705 303 391 3804 303 311 3303 303 343 4705 303 391 0506 303 391 3804 303 391 3804 303 311 7103 303 311 7103 303 343 4705 303 373 5307 303 319 3008 403 455 1002 303 346 2302 303 383 5007 303 392 5005 303 392 5005 303 311 7103 303 392 5005 303 311 4805 303 378 5302 303 334 0907 303 334 0907 LOCATION PARTS NO. C5055 C5061 C5062 C5071 C5072 C5073 C5074 C5111 C5112 C5201 C5202 C5204 C5206 C5207 C5208 C5301 C5302 C5303 C5304 C9001 C9002 C9003 C9004 C9006 C9009 C9011 C9013 C9502 C9504 C9505 C9506 C9508 C9510 C9511 C9512 C9513 C9515 C9516 C9517 C9518 C9519 C9520 C9523 C9524 1000P K 50V 4.7U K 6.3V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 1U K 6.3V 0.01U K 16V 4.7U K 6.3V 4.7U K 6.3V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 7P D 50V 7P D 50V 1U M 4V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 0.1U K 10V 4.7U K 4V 1U K 10V 1U K 6.3V 1U K 6.3V 1U K 6.3V 10U M 6.3V 4.7U K 6.3V 2.2U K 6.3V 4.7U K 6.3V 4.7U K 6.3V 4.7U K 6.3V 0.1U K 10V 4.7U K 6.3V 0.1U K 10V 0.1U K 10V 2.2U K 6.3V 4700P K 25V 4.7U K 6.3V 0.1U K 10V 1U K 6.3V 1U K 6.3V 1U K 6.3V 3P C 50V 3P C 50V 0.1U K 10V 1U K 6.3V 0.1U K 10V 1U K 6.3V 0.01U K 16V 0.1U K 10V 10U K 6.3V 1U K 6.3V 1U K 6.3V 22P J 50V 22P J 50V 0.1U K 10V 4.7U K 6.3V 220P J 25V 1U K 10V 0.1U K 10V 1U K 16V 22U M 6.3V 22U M 6.3V 22P J 50V 22U M 6.3V 470P K 50V 1U K 10V 1U K 6.3V 1U K 6.3V RB101 RB102 RB103 RB104 RB106 RB107 RB109 RB110 RB111 RB181 RB182 RB183 RB184 RB303 RB304 RB305 RB306 RB307 RB311 RB312 RB951 RB952 R1001 R1002 R1008 R1010 R1014 R1015 R1019 R1020 R1021 33 DESCRIPTION 303 334 0907 CERAMIC 1U K 6.3V 303 382 2700 CERAMIC 4.7U K 6.3V 303 358 3205 CERAMIC 10U K 6.3V 403 455 1408 CERAMIC 2.2U K 16V 303 383 5007 CERAMIC 1U K 16V 303 311 3303 CERAMIC 0.01U K 16V 303 334 0907 CERAMIC 1U K 6.3V 303 382 2700 CERAMIC 4.7U K 6.3V 303 358 3205 CERAMIC 10U K 6.3V 403 455 1408 CERAMIC 2.2U K 16V 403 455 1408 CERAMIC 2.2U K 16V 303 348 1204 CERAMIC 0.068U K 10V 403 455 1002 CERAMIC 1U K 10V 403 455 1002 CERAMIC 1U K 10V 403 455 1002 CERAMIC 1U K 10V 303 358 3205 CERAMIC 10U K 6.3V 303 381 1209 POS-SOLID 33U M 6.3V 303 309 8709 CERAMIC 100P J 50V 303 383 5007 CERAMIC 1U K 16V 303 391 3804 CERAMIC 1U K 6.3V 303 374 5801 CERAMIC 0.22U K 6.3V 303 382 2700 CERAMIC 4.7U K 6.3V 303 391 3804 CERAMIC 1U K 6.3V 303 419 8903 CERAMIC 10U M 6.3V 303 374 5801 CERAMIC 0.22U K 6.3V 303 391 3804 CERAMIC 1U K 6.3V 303 334 0907 CERAMIC 1U K 6.3V 303 343 4705 CERAMIC 0.1U K 10V 303 343 4705 CERAMIC 0.1U K 10V 303 343 4705 CERAMIC 0.1U K 10V 303 343 4705 CERAMIC 0.1U K 10V 303 340 2803 CERAMIC 2.2U K 10V 303 311 3501 CERAMIC 1000P K 50V 303 313 3905 CERAMIC 680P K 50V 303 313 3905 CERAMIC 680P K 50V 303 343 4705 CERAMIC 0.1U K 10V 303 343 4705 CERAMIC 0.1U K 10V 303 358 8309 CERAMIC 1U K 10V 303 311 3501 CERAMIC 1000P K 50V 303 343 4705 CERAMIC 0.1U K 10V 303 313 3905 CERAMIC 680P K 50V 303 311 3501 CERAMIC 1000P K 50V 303 374 5801 CERAMIC 0.22U K 6.3V 303 358 8309 CERAMIC 1U K 10V (RESISTOR PACKS) 645 040 1756 R-NETWORK 10KX4 1/32W 645 078 4019 R-NETWORK 0X2 0.063W 645 072 9119 R-NETWORK 150X4 1/16W 645 072 9119 R-NETWORK 150X4 1/16W 645 066 4328 R-NETWORK 47X4 1/16W 645 066 4328 R-NETWORK 47X4 1/16W 645 066 4328 R-NETWORK 47X4 1/16W 645 066 4328 R-NETWORK 47X4 1/16W 645 040 1756 R-NETWORK 10KX4 1/32W 645 091 2900 R-NETWORK 20KX2 1/16W 645 078 4613 R-NETWORK 2.2KX2 0.063W 645 091 2887 R-NETWORK 200X2 1/16W 645 078 4002 R-NETWORK 100KX2 0.063W 645 029 6000 R-NETWORK 100KX4 1/32W 645 032 8862 R-NETWORK 47KX4 1/32W 645 029 5997 R-NETWORK 1KX4 1/32W 645 051 0854 R-NETWORK 330X4 1/32W 645 029 5997 R-NETWORK 1KX4 1/32W 645 072 9157 R-NETWORK 150KX2 0.063W 645 078 4002 R-NETWORK 100KX2 0.063W 645 078 4606 R-NETWORK 220X2 0.063W 645 064 1619 R-NETWORK 39KX2 1/16W (RESISTORS) 301 224 9009 MT-GLAZE 10K JA 1/16W 301 237 2905 MT-GLAZE 51 JA 1/16W 301 224 9009 MT-GLAZE 10K JA 1/16W 301 224 9306 MT-GLAZE 1K JA 1/16W 301 224 8804 MT-GLAZE 100 JA 1/16W 301 225 1200 MT-GLAZE 4.7K JA 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 224 8804 MT-GLAZE 100 JA 1/16W 301 224 9009 MT-GLAZE 10K JA 1/16W LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. R1023 R1024 R1025 R1027 R1028 R1029 R1032 R1041 R1053 R1056 R1090 R1121 R1122 R1256 R1301 R1302 R1303 R1304 R1352 R1516 R1517 R1519 R1529 R1534 R1537 R1801 R1802 R1814 R1815 R1904 R1911 R1914 R1915 R1916 R1917 R1918 R1919 R1920 R1921 R1922 R1924 R1925 R1934 R1935 R1936 R1937 R3001 R3002 R3003 R3004 R3005 R3009 R3010 R3011 R3012 R3013 R3014 R3015 R3019 R3026 R5001 R5010 R5021 R5022 R5023 R5024 R5031 R5032 R5042 R5043 R5044 R5045 R5046 R5055 R5056 R5057 R5058 MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-FILM MT-GLAZE MT-GLAZE MT-FILM MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-FILM MT-FILM MT-FILM MT-FILM MT-FILM MT-FILM MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-FILM MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-FILM MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-FILM MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-FILM MT-GLAZE MT-GLAZE MT-FILM MT-FILM MT-GLAZE MT-FILM MT-FILM MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE MT-GLAZE R5059 R5061 R5062 R5063 R5070 R5071 R5072 R5074 R5075 R5076 R5111 R5201 R5202 R5203 R5204 R5205 R5206 R5207 R5208 R5209 R5210 R5301 R5302 R5303 R5304 R9003 R9004 R9005 R9006 R9008 R9013 R9014 R9015 R9016 R9501 R9502 R9504 R9505 R9506 R9507 R9510 R9511 R9511 R9513 R9514 R9515 R9516 R9517 R9519 R9520 R9523 R9526 R9529 301 225 7905 301 225 7905 301 226 1506 301 224 8804 301 225 1200 301 226 1506 301 224 9009 301 261 1004 301 261 6702 301 226 1506 401 352 2108 301 261 5101 301 224 9405 301 224 8804 301 226 1506 301 226 1506 301 226 1506 301 226 1506 301 224 9009 301 261 9703 301 261 9901 301 261 9901 301 261 9703 301 261 9703 301 261 9703 301 225 8100 301 226 1506 301 224 9009 301 224 9009 301 226 1506 301 225 1200 301 224 8804 301 224 8804 301 224 8804 301 226 1506 301 224 8804 301 224 8804 301 224 9900 301 226 1506 301 261 2605 301 226 1506 301 226 1506 301 225 0104 301 225 8506 301 225 8506 301 225 0203 301 225 8001 301 224 9306 301 224 9306 301 225 0401 301 261 2605 301 224 9306 301 225 1200 301 225 0401 301 225 7905 301 261 8706 301 263 2306 301 224 9306 301 224 9009 301 224 9306 301 261 5002 301 224 9009 301 258 7101 301 261 7907 301 261 9109 301 224 9504 301 261 2308 301 261 9307 301 224 8903 301 224 8804 301 225 1200 301 225 0104 301 224 8903 301 224 8903 301 224 9306 301 225 0104 301 240 9601 220 JA 1/16W 220 JA 1/16W 0.000 ZA 1/16W 100 JA 1/16W 4.7K JA 1/16W 0.000 ZA 1/16W 10K JA 1/16W 2.4K JA 1/16W 100 DU 1/16W 0.000 ZA 1/16W 44.2 DD 1/16W 1.0K DU 1/16W 1.0M JA 1/16W 100 JA 1/16W 0.000 ZA 1/16W 0.000 ZA 1/16W 0.000 ZA 1/16W 0.000 ZA 1/16W 10K JA 1/16W 75 DD 1/16W 91 DD 1/16W 91 DD 1/16W 75 DD 1/16W 75 DD 1/16W 75 DD 1/16W 10 JA 1/16W 0.000 ZA 1/16W 10K JA 1/16W 10K JA 1/16W 0.000 ZA 1/16W 4.7K JA 1/16W 100 JA 1/16W 100 JA 1/16W 100 JA 1/16W 0.000 ZA 1/16W 100 JA 1/16W 100 JA 1/16W 22K JA 1/16W 0.000 ZA 1/16W 10K DU 1/16W 0.000 ZA 1/16W 0.000 ZA 1/16W 27K JA 1/16W 1.8K JA 1/16W 1.8K JA 1/16W 3.3K JA 1/16W 330 JA 1/16W 1K JA 1/16W 1K JA 1/16W 330K JA 1/16W 10K DU 1/16W 1K JA 1/16W 4.7K JA 1/16W 330K JA 1/16W 220 JA 1/16W 22K DD 1/16W 750 JA 1/16W 1K JA 1/16W 10K JA 1/16W 1K JA 1/16W 910 DU 1/16W 10K JA 1/16W 180K DC 1/16W 68K DD 1/16W 12K DD 1/16W 2.2K JA 1/16W 7.5K DU 1/16W 15K DD 1/16W 100K JA 1/16W 100 JA 1/16W 4.7K JA 1/16W 27K JA 1/16W 100K JA 1/16W 100K JA 1/16W 1K JA 1/16W 27K JA 1/16W 680K JA 1/16W TH301 F5001 F5002 F5003 F5004 F5005 F5006 F5007 JK501 CN101 CN103 CN105 CN110 CN191 CN301 CN302 CN901 CN951 34 DESCRIPTION 301 224 8903 MT-GLAZE 100K JA 1/16W 301 261 7303 MT-FILME 82K DD 1/16W 301 261 8508 MT-FILM 47K DD 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W 301 240 9601 MT-GLAZE 680K JA 1/16W 301 225 1408 MT-GLAZE 47K JA 1/16W 301 225 0807 MT-GLAZE 68K JA 1/16W 301 261 9307 MT-FILM 15K DD 1/16W 301 262 3205 MT-FILM 33 DD 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W 301 261 3800 MT-FILM 2.0K DU 1/16W 301 224 9405 MT-GLAZE 1.0M JA 1/16W 301 224 9405 MT-GLAZE 1.0M JA 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W 301 225 0104 MT-GLAZE 27K JA 1/16W 301 224 9405 MT-GLAZE 1.0M JA 1/16W 301 224 9306 MT-GLAZE 1K JA 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W 301 224 9306 MT-GLAZE 1K JA 1/16W 301 258 7101 MT-GLAZE 180K DC 1/16W 301 261 8409 MT-FILM 43K DD 1/16W 301 261 3800 MT-FILM 2.0K DU 1/16W 301 261 8706 MT-FILM 22K DD 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 224 9504 MT-GLAZE 2.2K JA 1/16W 301 261 1509 MT-GLAZE 4.3K JA 1/16W 301 224 9009 MT-GLAZE 10K JA 1/16W 301 224 9702 MT-GLAZE 22 JA 1/16W 301 224 9702 MT-GLAZE 22 JA 1/16W 301 225 3808 MT-GLAZE 1.5K JA 1/16W 301 225 3808 MT-GLAZE 1.5K JA 1/16W 301 314 0404 MT-FILM 27 FD 1/6W 301 314 0503 MT-FILM 22 FD 1/6W 301 261 8508 MT-FILM 47K DD 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 225 8100 MT-GLAZE 10 JA 1/16W 301 261 2704 MT-FILM 4.7K DU 1/16W 301 261 2704 MT-FILM 4.7K DU 1/16W 301 269 3901 MT-GLAZE 4.7K DC 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 258 9303 MT-GLAZE 220K DC 1/16W 301 258 9303 MT-GLAZE 220K DC 1/16W 301 261 5101 MT-FILM 1.0K DU 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 261 5309 MT-FILM 470 DU 1/16W 301 226 1506 MT-GLAZE 0.000 ZA 1/16W (THERMISTOR) 308 054 7700 TH NCP15WF104F03-RC (FUSES) 423 034 0905 FUSE 32V 2A 323 031 5609 FUSE 32V 2A 423 033 6205 FUSE 32V 1.6A 323 031 5609 FUSE 32V 2A 323 031 5609 FUSE 32V 2A 323 031 5500 FUSE 32V 1A 323 031 5500 FUSE 32V 1A (JACK) 645 086 0430 SOCKET,DC 3P (CONNECTORS) 645 076 4158 PLUG,PWB-PWB 20P (N.S.P.) 645 093 7026 SOCKET,PWB-WIRE 3(N.S.P.) 645 098 8134 PLUG,PWB-PWB 20P (N.S.P.) 645 086 0638 SOCKET,10P (N.S.P.) 645 097 3888 SOCKET,IF(HDMI) 1(N.S.P.) 645 097 6155 SOCKET,FPC 17P (N.S.P.) 645 073 7060 SOCKET,FPC 6P (N.S.P.) 645 092 7836 PLUG,PWB-PWB 44P (N.S.P.) 645 095 5433 SOCKET,FPC 27P (N.S.P.) LOCATION PARTS NO. DESCRIPTION LOCATION PARTS NO. COMPL PWB,VF-1 (MISCELLANEOUS) 636 121 5244 HOLDER TERMINAL BAT-SG314 411 178 9403 SCR S-TPG PAN PCS 1.7X4.0 636 121 5534 TERMINAL BATT-SG314/J 636 120 9809 C1701 C1702 C1703 C1704 C1705 C1706 C1707 C1708 C1709 C1710 C1712 COMPL PWB,TB-1 636 120 9816 Q1403 OR OR Z6301 C1401 C1402 C1403 C1404 C1405 C1406 C1408 C1409 C1410 RB141 RB142 RB143 R1401 R1402 CN141 CN142 (SEMICONDUCTORS) 305 167 0406 TR EMD12 405 218 3902 TR UP0431300 305 216 2108 TR RN4984FE (RECHARGEABLEBATTERY) 945 051 6000 BATTERY,RECHARGE (CAPACITORS) 303 311 7301 CERAMIC 4700P K 25V 303 309 8402 CERAMIC 10P D 50V 303 309 8402 CERAMIC 10P D 50V 303 309 8402 CERAMIC 10P D 50V 303 309 8402 CERAMIC 10P D 50V 303 309 8402 CERAMIC 10P D 50V 303 311 7301 CERAMIC 4700P K 25V 303 311 7301 CERAMIC 4700P K 25V 303 311 5109 CERAMIC 3P C 50V (RESISTOR PACKS) 645 029 5980 R-NETWORK 100X4 1/32W 645 040 1756 R-NETWORK 10KX4 1/32W 645 040 1756 R-NETWORK 10KX4 1/32W (RESISTORS) 301 224 8804 MT-GLAZE 100 JA 1/16W 301 225 8100 MT-GLAZE 10 JA 1/16W (CONNECTORS) 645 092 8185 SOCKET,CARD(SD)12(N.S.P.) 945 075 2231 SOCKET,PWB-PWB 20(N.S.P.) RB171 RB172 R1701 R1702 R1703 CN171 CN172 636 120 5276 Q5402 IC541 D5401 D5402 D5404 636 120 5054 T5401 T5402 (SWITCH) 645 092 3159 SWITCH,PUSH 1P-1TX1 (MISCELLANEOUS) 636 122 6318 ASSY,WIRE VF1&TB2-SG314 (N.S.P.) 636 122 6325 ASSY,WIRE VF1&TB2-SG314 (N.S.P.) C5401 C5410 C5411 C5431 C5432 C5433 C5434 C5435 COMPL PWB,TB-3 636 120 9823 IC611 C6101 S6110 CN611 (INTEGRATEDCIRCUIT) 409 690 2309 IC MRX1518HTA (CAPACITOR) 303 343 4705 CERAMIC 0.1U K 10V (SWITCH) 645 057 0773 SWITCH,PUSH 1P-1T (CONNECTOR) 645 073 7060 SOCKET,FPC 6P (N.S.P.) RB541 R5402 R5422 R5424 R5425 R5431 R5432 R5433 R5434 R5435 COMPL PWB,TB-4 636 120 9830 S6201 S6202 S6203 S6204 S6205 CN621 CN622 (CAPACITORS) 303 391 3804 CERAMIC 1U K 6.3V 403 455 1002 CERAMIC 1U K 10V 303 396 9504 CERAMIC 2.2U K 10V 303 396 9504 CERAMIC 2.2U K 10V 303 396 9504 CERAMIC 2.2U K 10V 303 396 9504 CERAMIC 2.2U K 10V 303 281 2405 CERAMIC 0.22U K 16V 303 281 2405 CERAMIC 0.22U K 16V 303 383 5007 CERAMIC 1U K 16V 303 383 5007 CERAMIC 1U K 16V 303 391 3804 CERAMIC 1U K 6.3V (RESISTOR PACKS) 645 072 9119 R-NETWORK 150X4 1/16W 645 072 9119 R-NETWORK 150X4 1/16W (RESISTORS) 301 226 1506 MT-GLAZE 0.000 ZA 1/16W 301 228 4505 MT-GLAZE 2.2 JA 1/16W 301 224 8903 MT-GLAZE 100K JA 1/16W (CONNECTORS) 645 093 9228 SOCKET,FPC 39P (N.S.P.) 645 093 7033 SOCKET,PWB-WIRE 3(N.S.P.) COMPL PWB,ST-1 COMPL PWB,TB-2 S6501 DESCRIPTION CN541 (SWITCHES) 645 054 8857 SWITCH,PUSH 1P-2TX1 645 079 1499 SWITCH,PUSH(4DIR+CENTER) 645 098 9094 SWITCH,PUSH 1P-1T 645 057 0773 SWITCH,PUSH 1P-1T 645 057 0773 SWITCH,PUSH 1P-1T (CONNECTORS) 645 097 6155 SOCKET,FPC 17P (N.S.P.) 645 073 7060 SOCKET,FPC 6P (N.S.P.) 35 (SEMICONDUCTOR) 406 021 5107 TR TIG032TS-S-TL-E (INTEGRATEDCIRCUIT) 409 684 3800 IC BD4218NUV (DIODES) 307 245 6805 DIODE FPSN4 407 265 1900 DIODE RE0208DA-TR-E 307 221 4108 DIODE MA2SD19 (TRANSFORMERS) 645 097 3864 TRANS,STEP UP 645 084 1835 TRANS,STEP UP (CAPACITORS) 303 392 5005 CERAMIC 22U M 6.3V 303 428 3302 CERAMIC 0.022U K 350V 303 428 3609 CERAMIC 0.01U K 350V 303 391 3804 CERAMIC 1U K 6.3V 303 391 3804 CERAMIC 1U K 6.3V 303 311 3501 CERAMIC 1000P K 50V 303 311 3501 CERAMIC 1000P K 50V 303 311 5000 CERAMIC 33P J 50V (RESISTOR PACK) 645 029 5997 R-NETWORK 1KX4 1/32W (RESISTORS) 302 106 1609 MT-GLAZE 100K JD 1/8W 302 106 1708 MT-GLAZE 220K JD 1/8W 301 224 9009 MT-GLAZE 10K JA 1/16W 301 225 1804 MT-GLAZE 47 JA 1/16W 301 224 8804 MT-GLAZE 100 JA 1/16W 301 224 9009 MT-GLAZE 10K JA 1/16W 301 225 0609 MT-GLAZE 5.6K JA 1/16W 301 225 0203 MT-GLAZE 3.3K JA 1/16W 301 224 8804 MT-GLAZE 100 JA 1/16W (CONNECTOR) 645 092 3906 SOCKET,PWB-PWB 20 (N.S.P.) CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS TABLE OF CONTENTS OVERALL WIRING & BLOCK DIAGRAMS Page OVERALL WIRING..............................................................................................................................................C3 OVERALL CIRCUIT.............................................................................................................................................C4 POWER CIRCUIT...............................................................................................................................................C4 IMAGE SENSOR CIRCUIT.................................................................................................................................C5 LENS CIRCUIT . ................................................................................................................................................ C5 MAIN CIRCUIT....................................................................................................................................................C6 SYSTEM CONTROL CIRCUIT . ........................................................................................................................ C7 STROBE CIRCUIT..............................................................................................................................................C7 CP1 BOARD (PWA) POWER.............................................................................................................................c8 CA1 BOARD IMAGE SENSOR ........................................................................................................................ C9 CP1 BOARD (CAA) LEVEL SHIFT . ............................................................................................................... C10 MAIN CIRCUIT WAVEFORMS ........................................................................................................................ C10 CP1 BOARD (DMA) MAIN ............................................................................................................................. C11 CP1 BOARD (DMB) HDMI ............................................................................................................................. C16 CP1 BOARD (TCA) LENS............................................................................................................................... C17 CP1 BOARD (SYA) SYSTEM CONTROL....................................................................................................... c18 LCD CIRCUIT WAVEFORMS . ........................................................................................................................ C19 ST1 BOARD STROBE ................................................................................................................................... C19 TB1 BOARD SD CARD SOCKET................................................................................................................... C19 TB2 BOARD HINGE SWITCH......................................................................................................................... C19 TB3 BOARD MR SENSOR............................................................................................................................. C20 TB4 BOARD KEY SWITCHES........................................................................................................................ C20 VF1 BOARD LCD CONNECTOR ................................................................................................................... C20 CIRCUIT DIAGRAMS PRINTED WIRING BOARDS (P.W.B.) CP1 P.W.B. (SIDE A) ....................................................................................................................................... CP1 P.W.B. (SIDE B) ....................................................................................................................................... CA1 P.W.B. (SIDE A & B) ................................................................................................................................ TB3 P.W.B. (SIDE A & B) ................................................................................................................................. TB1 P.W.B. (SIDE A & B) ................................................................................................................................. TB2 P.W.B. (SIDE A & B) ................................................................................................................................. VF1 P.W.B. (SIDE A & B) ................................................................................................................................. ST1 P.W.B. (SIDE A & B) ................................................................................................................................. TB4 P.W.B. (SIDE A & B) ................................................................................................................................. C1 C21 C22 C23 C23 C24 C24 C25 C25 C26 NOTES: 1. All resistance values in "OHMS" unless otherwise noted. (K=1,000 ; M=1,000,000) 2. All capacitance values in "µF" unless otherwise noted. p=pico farad ; n=nano farad ; µ ,u or U=micro farad 3. All inductance values in "µH" unless otherwise noted. µ ,u or U=micro henry ; m=milli henry Figure of printed wiring boards Multilayer board: "Side A" means the view from A side of the board. "Side B" means the view from B side of the board. Singlelayer board: View from the copper-foil side of the board, otherwise noted. PRODUCT SAFETY NOTICE THE COMPONENTS DESIGNATED BY A SYMBOL ( ) IN THIS SCHEMATIC DIAGRAM DESIGNATES COMPONENTS WHOSE VALUE ARE OF SPECIAL SIGNIFICANCE TO PRODUCT SAFETY. SHOULD ANY COMPONENT DESIGNATED BY A SYMBOL NEED TO BE REPLACED, USE ONLY THE PART DESIGNATED IN THE PARTS LIST. DO NOT DEVIATE FROM THE RESISTANCE, WATTAGE AND VOLTAGE RATINGS SHOWN. EXPLANATORY NOTES (EXAMPLES) Resistor 10K:1/16J means 10kilo ohm ±5%, 1/16watt max. 1M:1/10D means 1mega ohm ±0.5%, 1/10watt max. (Tolerance K:±10%, J:±5%, G:±2%, F:±1%, D:±0.5%) Capacitor 0.047:F means 0.047micro farad, Ftype. Electrolytic capacitor 10:16 means 10micro farad, 16volt max. Inductor 330:J means 330micro henry ±5% 470:K means 470micro henry ±10% No description J or K means ±5% The number of "H=##" written in slant character, shows the voltage. The number of "H=##" written in upright character, shows the height of the parts. PAL-H-EX C2 1 2 3 9 A 4 5 6 7 LCD 8 9 10 ZOOM SW UNIT C3 11 12 13 Z1 6 5 4 3 14 15 5 6 6 7 8 9 7 9 10 10 W1-17300/SG314-J HDMI 16 8 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 Z1 20 Z1 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 Z2 17 Z3 CN541 AL3.2V AL3.2V FLCTL ZCHGDONE CHG BOOST5V N.C. N.C. N.C. GND GND GND GND GND GND UNREGST UNREGST UNREGST UNREGST UNREGST TRANS 2 TRIGGER 1 3 18 JW542 4 5 XKT 4 BLACK CN142 GND SDCLK GND SDCMD SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDWP GND GND ZCARD SDDET VDD3 VDD3 GND GND GND BACKUP_BAT GND XKT 3 1 2 3 TRG DC JACK 2 JW541 JK501 1 XAN BROWN DMA CN105 AL3.2V AL3.2V FLCTL ZCHGDONE CHG BOOST5V NC NC NC GND GND GND GND GND GND UNREGST UNREGST UNREGST UNREGST UNREGST 1 XAN PWA CN101 GND SDCLK GND SDCMD SDDAT3 SDDAT2 SDDAT1 SDDAT0 SDWP GND GND ZCARD SDDET VDD3 VDD3 GND GND GND BACKUP_BAT GND 1 Z2 1 PWA 2 Z4 3 DMA 4 Z4 Z3 Z2 Z1 DATA3 COMMAND VSS VDD CLOCK VSS DATA0 DATA1 DATA2 CARD COMMON WP CN141 12 11 10 9 8 7 6 5 4 3 2 1 1 5 JW185 SP- 6 Z1 1 7 Z2 JW186 SP+ 8 CP1 (PWA) (CAA) (DMA) (DMB) (TCA) (SYA) 9 10 11 WHITE 12 CL511 CL510 CL509 CN951 FOCUS_BFOCUS_A+ FOCUS_B+ FOCUS_AGND HALL_OUTHALL_INHALL_OUT+ HALL_IN+ GND DRIVE+ DRIVEZOOM_PI_AC ZOOM_PI_E ZOOM_PI_K N.C ZOOM_BZOOM_A+ ZOOM_B+ ZOOM_AGND FOCUS_PI_E N.C FOCUS_PI_K FOCUS_PI_AC THERMISTOR+ THERMISTOR- JW181 MIC(L) JW182 A_GND JW184 A_GND JW183 MIC(R) DMA 13 Z4 HOTPLUG DET DDC+5V RESERVED DDC SDA DDC SCL CEC DDC/CEC GND TMDS CLKTMDS CLK+ TMDS CLK SHD TMDS DATA0TMDS DATA0+ TMDS SHLD0 TMDS DATA1TMDS DATA1+ TMDS SHLD1 TMDS DATA2TMDS DATA2+ TMDS SHLD2 CN191 Z3 DMB Z2 SYA Z1 BAT+ BAT_T BAT- Z1 RED 14 15 16 17 18 19 1 2 3 4 BATTERY AL3.2V GND PANEL_OPEN COM1 POWER GND CN302 1 SYA 5 6 Z2 17 DMA 2 1 Z1 Z1 2 3 4 5 6 Z2 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 1 1 1 1 2 3 4 5 6 7 8 9 10 MIC(L) Z2 CN611 AL3.2V GND PANEL_OPEN COM1 POWER GND Z2 16 15 14 13 12 7 CAA 1 2 3 11 8 9 DMA 4 TB4 10 10 11 GND 2ND 1ST GND SCAN IN0 SCAN IN1 SCAN IN2 SCAN IN3 SCAN IN4 SCAN OUT0 SCAN OUT1 SW3.2V ZOOM_AD BOOST5V GREEN_LED RED_LED GND CN301 Z2 Z2 DMA 9 8 12 13 14 15 16 17 Z1 Z1 Z3 LINE_R GND LINE_L Pr_OUT Y_OUT Pb_OUT USB_D+ USB_DUSB_VBUS AV_JACK CN110 MIC(R) ZOOM_AD SW3.2V GND GREEN_LED RED_LED BOOST5V CN622 Z2 7 6 5 4 3 2 1 30 29 DMA CN621 GND KEY_2nd KEY_1st GND SCANIN0 SCANIN1 SCANIN2 SCANIN3 SCANIN4 SCANOUT0 SCANOUT1 SW3.2V ZOOM_AD BOOST5V GREEN_LED RED_LED GND 1 2 Z4 USB & AV 5 6 Z1 Z2 Z3 Z1 Z2 28 Z1 3 44 39 43 44 27 43 4 42 38 41 42 26 41 5 40 37 40 25 39 6 39 36 38 24 38 7 37 23 37 8 36 35 36 34 35 22 35 9 34 21 33 34 10 32 33 33 32 32 31 20 30 31 19 30 11 29 12 29 31 28 18 28 17 27 30 27 16 26 13 K 29 26 15 25 14 CA1 28 25 14 24 15 24 27 23 13 22 23 16 21 22 26 21 12 20 17 19 20 18 19 19 18 25 CN901 VDDIO VDDIO GND GND SLVS0N SLVS0P GND SLVS1N SLVS1P GND SLVSCN SLVSCP GND SLVS2N SLVS2P GND SLVS3N SLVS3P GND AGND VAA VAA VAAPIX VAAPIX AGND GND FLASH SHUTTER GPI3 GPI2 GPI1 GPI0 GND RESET_N SCL SDA GND EXTCLK GND 0.8V VDD VDD VDDPLL VDDPLL 24 17 18 23 16 17 9 15 16 11 15 20 14 8 13 14 10 12 13 21 11 12 22 10 11 21 10 7 9 22 8 9 23 7 8 20 6 7 6 5 6 19 4 5 5 3 4 24 3 18 4 2 25 3 CN103 GND GND GND GND GND GND GND HINGE VDD3 LCD_AN LCD_CA LCDSD LCDCK LCDEN LCDRESET VD HD GND LMCLK GND LCDD7 LCDD6 LCDD5 LCDD4 LCDD3 LCDD2 LCDD1 LCDD0 VDD3 GND 2 26 2 1 Z1 27 28 29 30 1 17 GND GND GND GND GND GND GND HINGE VDD3 LCD_AN LCD_CA LCDSD LCDCK LCDEN LCDRESET VD HD GND LMCLK GND LCDD7 LCDD6 LCDD5 LCDD4 LCDD3 LCDD2 LCDD1 LCDD0 VDD3 GND CN172 1 16 15 14 13 VF1 Z6 Z5 Z4 Z3 Z2 Z1 TB2 12 Z2 11 Z3 8 Z4 10 CN911 VDDIO VDDIO GND GND SLVS0N SLVS0P GND SLVS1N SLVS1P GND SLVSCN SLVSCP GND SLVS2N SLVS2P GND SLVS3N SLVS3P GND AGND VAA VAA VAAPIX VAAPIX AGND GND FLASH SHUTTER GPI3 GPI2 GPI1 GPI0 GND RESET_N SCL SDA GND EXTCLK GND 0.8V VDD VDD VDDPLL VDDPLL 7 F 6 JW654 1 HINGE_SW2 BLACK G 5 1 H 4 JW172 HINGE_SW2 RED JW653 HINGE_SW1 D 1 E BLACK 1 I 3 B CN171 GREST SHDB SCEN SCL SDA DIN7 DIN6 DIN5 DIN4 DIN3 DIN2 DIN1 DIN0 DCLK HD VD VCC GND DUMMY LED+ LEDFB PWM CP2 CP1 AVDD DUMMY AGND VCOMH VCOML PCD VCC1.8 DUMMY CP8 CP7 CP6 CP5 CP4 CP3 JW171 HINGE_SW1 J 2 1 C RED OVERALL WIRING & BLOCK DIAGRAMS OVERALL WIRING LENS K SPEAKER SD J TCA I H TB1 G Z4 F ST1 E D C FLASH REFLECTOR B TB3 A 19 POWER CIRCUIT OVERALL CIRCUIT TB1 BOARD CN141 SD CARD SOCKET K BACKUP BATTERY LENS UNIT x30 F=1.8 POWER_IN TO DC JACK STROBE UNIT LEVEL SHIFT LCD 3inch 230Kpix WIDE POWER MAIN CAPACITOR ARM CPU BATTERY TERMINAL PVDD2 TEMP SENSOR LOUTA21,22 CTL1 LITIUM ION BATTERY 1900mAh LOUTB21,22 SHDNB23 LOUT31,32 32.768KHz IC503,L5005 REGULATOR IC301 IC155 HDMI USB2.0 High Speed CN110 8bit MICRO-PROCESSOR HDMI IC302 BATTERY BACKUP POWER SW J TO DMA TO SYA BLON CURRENT DETECTOR CIRCUIT Q5008 SWITCH I LCDAN TO DMA LCDCA VDD3 TO DMA H VDD1.2 Q5003,Q5004 CMOS1.8V PAON1 VDD1.8 REGULATOR TB3 BOARD CN302 VIDEO OUT (composite) (component) IC153 VIDEO DRIVER TO SYA VAA2.8 L5002 STEP UP & DOWN CIRCUIT L5003 STEP DOWN CIRCUIT TO DMA PAON2 IC504, L5006 SERIAL SPEAKER VDD5 PON BOOST5.0V TO DMA L5301 STEP UP CIRCUIT II71 TO SYA USB_VBUS TO DMA USB_ON TO SYA Q5013,Q5014 L5007, Q5007 STEP UP CIRCUIT OUT7 PON TO SYA CN611 MIC L IC182 AUDIO CODEC 16bit/48k Q5203,Q5204 PVDD1 X3002 AUDIO OUT TB2 BOARD BAT_T CN103 DATA,CLK I2S MIC R 9 USB AVDD SHDNB1 LOUT11,12 JK501 IC121 PROGRAM FLASH 512Mb DDR SDRAM 512Mb 12MHz HINGE SW IC521 BATTERY CHARGE DOUT11,12 DC JACK IC101 SYSTEM ASIC I2C CN172 H 1,7 ERR TIMEOUT CHG_CNT SHDNB7 5ch LVDS VF1 BOARD G IC521 BATTERY CHARGE IC541 STROBE CHARGE SWITCHING CONTROL 10MHz CN171 FPC IC501 SWITCHING CONTROL CN541 PWA 24MHz IC501 ST1 BOARD CN105 CN911 X1102 48.000MHz CP1 BOARD IC951 LENS DRIVER, IRIS CONTROLLER CONTROL I CN901 TCA 10Mpix BAT K 14 FLT 11 CHG 8 EN CN951 CN101 CA1 BOARD IC911 CMOS IMAGE SONSOR DC 12,13 BAT+ TO BATTERY CN142 PON2 MR SENSOR TO DMA TO SYA SG314_POWER_BLOCK G SYA CN301 CN191 HDMI F F CN621 TB4 BOARD KEY SWITCHES CN622 J DC_IN TO SYA ZOOMSW UNIT RED/GREEN LED SG314_ALL_BLOCK E E D D C C B B A A 1 2 3 4 5 6 7 8 9 10 C4 11 12 13 14 15 16 17 18 19 IMAGE SENSOR CIRCUIT K VDD_1.8 VDDIO J VDDPLL 7, 8, 14, 21 10, 12, 19 VDD VAA_2.8 32, 38, 41 29 VDDPLL VDDIO VAAPIX VAA VDD_SLVS_TX CAA DMA IC101 35, 36 VAAPIX VDD_SLVS_TX SHUTTER IC911 IC951 LENS DRIVER IRIS CONTROLLER FLASH GPI[3:0] SHUTTER 26 27 4 PON TO SYA FLASH RESET_N 18 11 SCL SDA 15, 16 ZOOM_PI 15 DVDD25 I 14 Z_SENSE 25 VDD3 FOCUS_PI PI1 ZPIOUT Q9001 Q9002 13 OPVDD,ADVDD,DAVDD, DVD33,ADVRH OUT5B LEVEL SHIFT G 1 J THERMISTOR VDD3 SDIN[3:0] SDIP[3:0] SCKIP,SCKIN 1:5, 44:48 27 PI2 VDD1.8 SLV[0:3]P SLV[0:3]N SLVSCP,SLVSCN EXTCLK 3 IC952 3.3V REG CN951 LENS_BLOCK 26 VM1,VM2,VM3, VM4,VCC BOOST5V CMOS IMAGE SENSOR H VDD3 FPI_AD 6 22:25 K ZPI_AD SYSTEM ASIC TO IC101 GPI[3:0] I CA1 LENS CIRCUIT LENS_TEMP A_I2CSCLK A_I2CSDATA RESET_N 20 ZOOM_B+ 19 OUT4B ZOOM_B- 17 OUT1A FOCUS A+ 2 FOCUS A- 4 OUT2A FOCUS B+ 3 OUT2B FOCUS B- 1 OUT1B ADCK F SG314_SENSOR_BLOCK STATE1 ST1 STATE2 ST2 LENS_RESETN E 22 18 OUT3B COMPD1 F_SENSE ZOOM_A+ OUT4A FPIOUT 24 ZOOM_A- OUT3A COMPD2 PILED H ZOOM MOTOR G FOCUS MOTOR F ZRESET CLK24M CLK LENS_SDI MDI LENS_SCLK MCLK LENS_EN MCSB E IRIS SHUTTER SPRING MDO LENS_SDO PS DRIVE+ OUT6A PS D N 12 DRIVE- OUT6B 11 S HALL_ELEMENT - D + SHUTTER+ C HB1 SHUTTER HGND1 TO IC101 VINM2 HALL IN+ 9 HALL IN- 7 HALL OUT- 6 C VOUT2 B HIN B HALL OUT+ VINP2 8 VOUT1 SG314_LENS_BLOCK A A 1 2 3 4 5 6 7 8 9 10 C5 11 12 13 14 15 16 17 18 19 MAIN CIRCUIT K LEVEL SHIFT SDA Q9001 SCL CN901 BtoB CA1 BOARD J Q9002 ADCK K A_I2CSDATA A_I2CSCLK SLVD[0:3][N,P] SLVSC[N,P] FLASH/RESET GPI[0:3] XO J X1102 48.000MHz XI PWA BLOCK POWER SUPPLY I IC951 LENS DRIVER CN951 FPC LENS UNIT PAON1/PAON2 SHUTTER+/LENS_RESET LENS_SCLK/LENS_EN/LENS_SD PS STATE1/STATE2 FPIOUT/ZPIOUT CLK24 USB_VBUS TO CN110 PON/PON2 POWER/PANELOPEN _ H CN302 FPC TB3 BOARD CN301 FPC TB4 BOARD CN105 BtoB ST1 BOARD I H FPI_AD/ZP_AD/LENS_TEMP G SDCLK SDDAT[0:3] SDCMD SDDET SDWP CN101 BtoB TB1 BOARD MRST PLLEN SREQ ASIC_SCK ASIC_SDI ASIC_SDO COMREQ IC301 8bit MICRO-PROCESSOR KEY[1st,2nd] STBY_RED/GREEN G IC101 LMCLK LCDD[0:7] LCDHD/LCDVD FLCTL F A_I2CSDATA/A_I2CSCLK VPIXCLK/Y[0:7]/UV[0:7] E IC121 PROGRAM FLASH 512Mb DDR_SDRAM 512Mb D DQ[0:31]/DQS[0:3]/DQM[0:3] DSA[0:12] DSCK[N,P] ZRAS/ZCAS IC191 HDMI TRANSMITTER TMDS_DATA[0:3][N,P] DDC/CEC CN191 HDMI YOUT UOUT VOUT E ZCS0 ZFRD/ZFWR A[1:16] D[0:15] IC153 VIDEO DRIVER D DACDAT/BCLK/LRCLK Y_OUT Pb_OUT Pr_OUT C IC182 AUDIO CODEC ADCDAT AMCLK AUDEN/AUDSD/AUDCK B AUDIO L OUT AUDIO R OUT C CN110 AV & USB CN103 BtoW VF1 BOARD F ST_CHG SYSTEM ASIC B MICL/MICR USB D+ USB DUSB_VBUS TO PWA A A SG314_MAIN_BLOCK 1 2 3 4 5 6 7 8 9 10 C6 11 12 13 14 15 16 17 18 19 SYSTEM CONTROL CIRCUIT K AL3.2V BOOST5V UNREG BACK UP 6 1 2 9 5 3 IC301 53 ZRESET 49 BAT_OFF 60 BATTERY Q3003 Z6301 (TB1) SW3.2V 3 I XCIN 54 8bit MICROPROCESSOR XCOUT 55 FLCTL CHG AL3.2V TH301 THERMISTOR ZCHG_DONE LEFT RIGHT SET 44 SCAN OUT0 PON2 29 -- VREC PLAY MENU POWER 43 SCAN OUT1 USB_ON 24 PW_TEST -- TEST -- -- 42 SCAN OUT2 PON 31 Q3003 SHUTTER SW F ASIC_SCK Q3005 STBY_RED 7 Q3005 STBY_GREEN PON 6 ZOOMSW UNIT CHARGE MONITOR CIRCUIT OSCILLATION CIRCUIT LIGHT EMITTING ELEMENT (XENON TUBE) T5402 2 IGBT DRIVER TRIGGER CIRCUIT H SG314_ST_BLOCK TO PWA TO PWA,TCA G PLLEN ASIC_SCK 1 ASIC_SDO ASIC_SDI ZSREQ F MRST MRST 27 GREEN.LED ADJ I EMISSION CONTROL CIRCUIT NAND_RESET ZSREQ 50 HOTLINE 8 LIGHT EMISSION CIRCUIT USB_ON ASIC_SI 63 ASIC_SO 64 RED LED 10 Q5402 3 DC_IN 9 STROBE CHARGE 4 PON2 PLLEN 33 23 KEY_2ND 6 TIME_OUT NAND_RESET 32 51 KEY_1ST IC541 5 TO DMA ERR DC_IN 40 DOWN 1,2 CHG_CNT ERR 34 UP TB4 5 BAT_T BAT_TMP 48 TIME OUT 18 G C5412 J ST_CHG_ON CHG_CNT 4 11 SCAN IN4 RECTIFIER CIRCUIT 3 3 TO CP1 (DMA) CN105 21 SCAN IN0 12 SCAN IN3 OSCILLATION TRANSFORMER ZCHGDONE 4 ZCHG_DONE 17 13 SCAN IN2 4 D5402 UNREGST 16:20 ST_CHG_ON 8 14 SCAN IN1 BLOCK CN541 X3002 32.768KHz INT_TEMP 62 ZBACKUP CTL 28 SW3.2 ON H 2 1 POWER FILTER 59 VDD1 4 T5401 C5401 VDD2 36 VDD3 LI ALWAYS BAT REST OFF J 7 ALWAYS 8 IC302 BATTERY BACKUP K CHARGING CIRCUIT UNREGSY BACKUP3.2V Q3001 STROBE CIRCUIT HOTLINE 5 ZBOOT_COMREQ ZBOOT_COMREQ 52 45 ZOOM_AD TO DMA IC611 (TB3) AL3.2V E 1 VCC OUT 2 3 22 PANEL OPEN MR SENSOR IC305 BAT+SY TO PWA D 2 CELL TB2 ZAVJACK ZAV_JACK 47 20 BAT_RTX BATTERY REMAINING GAUGE ZUSB_DET ZUSB_DET 15 19 BAT_UTX TXRX 5 ZCARD E HDMI_HPD HDMI_HPD 16 ZCARD 2 TO DMA -DMB D 41 HINGE SG314_SYSTEM_BLOCK C C B B A A 1 2 3 4 5 6 7 8 9 10 C7 11 12 13 14 15 16 17 18 19 CIRCUIT DIAGRAMS CP1 BOARD (PWA) POWER K D5007 RB060M-30 UNREG 1 2 EDZ7.5B D5203 TO SYA 1M;1/16J USB_VBUS R5056 TO DMA 1K;1/16J R5059 100K;1/16J Q5014 2SK3541 I R5057 27K;1/16J R5210 1K;1/16J R5206 H USB_ON TO SYA ! ! 1 F5002 2A32V F5003 1.6A32V 2 UNREGSY 2 1 F88K1R6D3MFFD 1608 F88K2R0D3MFFD 1608 TO SYA 1608 16 3 2 1 2.2;B C5071 4 5 Q5007 MCH5835-E L5007 6.8;N H=1.5 3.0X3.0 R5001 910;1/16D 10 0.1;B 10 C5006 C5005 50 R5301 C5303 100P;CH R5303 Z1 1AV4L2KN4R7NG LQH3NPN4R7NM0L L5005 VAA2.8 4.7;N E R5070 100K;1/16J 2125 1 VSS 2 VSS VOUT 3 CE/MODE LX VIN C5112 10;B 6.3 1608 33;6.3-V C5302 C5304 1;B 16 3.5X2.8 H=1.2 6 5 4 PAON2 TO DMA D R5304 22K;1/16D 5.0 3.2 6.3 R5111 100K;1/16J H5 G7 3.4 F6 1.0 0.0 C7 SHDNB1 CTL1 F5 4.7;B C5111 PW_CH1_SW 3.7 B4 SHDNB23 CTL2 SHDNB4 D6 1608 5.0 B3 SHDNB5 F4 SHDNB8 E4 G4 SHDNB9 E6 SHDNB6 OUT8 H3 C6 II8 G3 SHDNB7 VPIN8 H4 E5 3.1 OUT9 H2 5.0 II9 G2 A1 G1 IS1 CTL3 2125 II1 C5301 10;B 6.3 PGND4 D5301 MA21D38 180K;1/16D R5302 43K;1/16D PGND11 4.7;M NR4018T4R7M 1AV4L2FY4R7MG 4.0X4.0 H=1.8 2K;1/16D PGND12 VPIN32 DOUT11 IC503 XC9235C28CER QXC9235C28CEP PW_CH7_SW L5301 5.0 1;B 16 H6 VPIN31 QXXAGD168805G UPD168805FC-AN2-E1 REG 1.9 C5007 1608 G6 LOUT11 H7 D8 LOUT12 LOUT32 B7 G5 D1 D2 D3 E1 LOUT31 E2 DOUT12 PGND32 F1 PVDD1 IC501 PGND31 F2 SWITCHING CONTROL PGND2 G8 C2 F7 PVDD2 5.0 F A8 PGNDC F8 E8 E7 A4 E3 IS2 LOUTB22 D7 C5 II4 PGNDD H8 D5 II5 AVDD PGNDA LCDCA 3.4 B6 II6 3.4 LOUTB21 PGNDB R5075 15K;1/16D 1;B 1.0 B8 VREF 3.4 C8 VREG 0.4 C4 II71 0.7 D4 II72 0.8 C3 1.0 F3 II3 A7 CT II2 B5 C5004 A6 RT A2 A3 B1 B2 OUT7 C1 OUT6 LOUTA22 1.3 1;B 10 1608 MA21D38 OUT5 LOUTA21 H1 PW_CH3_SW 3.7 D5003 2125 C5031 22;B 6.3 7.5K;1/16D 3.0X3.0 H=1.5 OUT4 VPIN22 VPIN21 VPIN9 4.7;M 3.5 1AV4L2YH4R7MG NR3015T4R7M 3.0X3.0 3.7 CH2LOUT H=1.5 15K;1/16D R5031 R5032 D PW_CH2_SW C5033 2125 C5021 22;B 6.3 2125 RB496EA-TR D5002 3.7 L5002 NR3015T2R2M 1AV4L2YH2R2MG L5003 2.2;M C5032 470P;B 50 R5021 5 68K;1/16D R5022 R5023 12K;1/16D C5024 22P;CH 50 E 3 2 1 180K;1/16D C5022 22;B 6.3 4 SCP 0.2 0.1;B 10 C5001 0.0 220P;CH 0.4 2125 AGND A5 F G LCDAN 5 1608 CH7DRAIN 25 C5003 4.7;B 6.3 4 UP03397 Q5008 C5072 1;B 16 1 2 3 C5074 1;B 6.3 1608 1AV4L2KN6R8NG LQH3NPN6R8NM0L G R5076 33;1/16D UNREG_A C5073 0.01;B 16 27K;1/16J R5074 68K;1/16J Q5204 2SK3541 R5071 680K;1/16J D0.5 CL511 R5072 47K;1/16J BAT_TEMP R5205 D0.5 CL510 Z1 CHG_CNT R5204 Q5203 UPA650TT-A BATTERY CHARGE 9 8 R5058 EN TO DMB 680K;1/16J USB BAT 6.3 1;B 1608 USEL C5055 10 UPA650TT-A Q5013 POK 4 5 6 CT VDD5 TIMEOUT 3 2 1 11 10 R5055 100K;1/16J CHG 1;B 10K;1/16J R5010 12 GND ERR C5206 100K;1/16J R5202 2K;1/16D C5204 0.068;B 10 13 DC R5203 1M;1/16J 6 5 4 1 2 3 EDZ7.5B Q5201 UPA650TT-A D5201 14 DC THM C5208 1;B 10 H BAT- FLT SETI J Q5009 DTC144EM 1 2 3 BAT_T D0.5 CL509 BAT C5207 1;B 10 BAT+ 1 2 3 4 5 6 7 TO DMA DC_A IC521 MAX8601ETD+T QMAX8601ETD+P 16 1608 R5201 100K;1/16J TO BATTERY D5202 1608 C5201 2.2;B 16 EDZ7.5B I C5202 2.2;B UNREGST 2 1 F88K2R0D3MFFD 1608 TO SYA 6 5 4 1 DC_IN TO SYA 3 2 1 BAT+SY 1 J F5005 ! 2A32V 1608 F88K2R0D3MFFD F5001 2A32V DC JACK ! 4 5 6 S_GND F5004 2A32V ! R5208 1K;1/16J K R5209 100K;1/16J MA21D38 D5204 2 Z1 1608 F30K2R0D3SGFD Z2 Q5202 SI3473DV 3 2 1M;1/16J R5207 1608 L5001 FBMH1608HL300 1AV4J11B8060N MJC-040-D1-2 JK501 PON BLON C TO SYA TO DMA C BOOST5V VDD1.8 4.7;M Q5004 2SK3541 PWA 1608 R5044 4.7K;1/16J R5042 100K;1/16J TO DMA R5045 27K;1/16J P1-17300/SG314-J 1 2 3 TO DMA PON2 TO SYA B VDD1.2 R5024 VOLTEGE: VIEW MODE, LCD ON USE BATTERY A PAON1 R5046 100K;1/16J 6.3 Z1 CMOS1.8V Q5003 SSM3J120TU C5036 1;B 6.3 1 2 3 1608 VOUT CE/MODE R5043 100;1/16J VSS VSS 2125 R5063 100K;1/16J LX VIN 1AV4L2YH4R7MG NR3015T4R7M L5006 C5037 1;B 6.3 B 6 5 4 1608 C5061 4.7;B 82K;1/16D R5061 R5062 47K;1/16D XC9235C18CER QXC9235C18CEP C5062 10;B 6.3 REG IC504 VDD3 2.2K;1/16J 4 5 6 7 8 9 10 C8 11 12 13 14 15 16 17 18 19 TO DMA A CA1 BOARD IMAGE SENSOR K Z4 Z3 Z2 A_GND A_GND SDIP1 9 10 SCKIN 11 SCKIP 12 13 SDIN3 SCKIP SCKIN 6 5 4 3 2 1 SDIP1 SDIN1 E SDIP0 SDIN0 10;B C9128 C9127 VDD_SLVS 0.8 0.1;B AGND 48 47 46 45 44 43 SDIN2 7 VDDIO 8 C9126 0.1;B 1.8 R9107 C9125 F SDIP2 1.8 GND 0.1;B 0.1;B C9123 C9122 0;1/16Z 1608 44 0.1;B VDDPLL 2.8 C9120 FBMH1608HL601 1608 R9102 SDIN3 D 0;1/16Z MT9J001I12STCV(LCC) QXXAGB067---M 1.8 L9103 CMOS1.8 41 0;1/16Z 40 42 2.8 41 VAA 40 ATEST1_TOP ATEST2_TOP 39 2.8 38 VAA 2.8 37 36 VAAPIX PIXGND 2.8 35 VAAPIX 34 ATEST2_BTM 33 0.0 VDDSLVS_TX SDIP3 0.1;B 39 1.8 ADCK 38 SLVS0N VDD_SLVS_TX VDD VDD 18 37 32 VAA GND 9 SDA 36 1.8 SLVS0P 10 SCL 35 CMOS IMAGE SENSOR 34 VDDIO SLVS1N EXTCLK RESET_N SLVS1P 11 33 GPI0 1.8 1.8 GPI1 SLVSCN VDD GPI0 32 SLVSCP GND 31 GPI2 SLVS2N 12 GPI1 SHUTTER GPI3 1.8 30 SLVS2P 13 GPI2 FLASH IC911 0.0 SLVS3N VDDIO 0;1/16Z GND 14 R9105 0.0 GPI3 29 43 0;1/16Z SDA SHUTTER 28 R9104 GND SLVS3P 15 27 42 2.8 FLASH VDDPLL 16 26 2.8 ATEST1_BTM 25 VPP SCL 24 TEST A_GND A_GND 0;1/16Z 1608 G 17 VAAPIX 31 2.8 AGND 23 FBMH1608HL601 1608 R9101 RESET_N 22 L9102 VAA2.8 2.8 10;B C9106 19 C9119 0.1;B A_GND SDIP3 18 19 20 21 22 23 24 25 26 27 28 29 30 17 21 C9124 0.1;B C9118 0.1;B 16 C9121 0.1;B SDIP2 15 20 H SDIN2 14 R9106 C I SDIN1 8 0.1;B D 7 0.1;B C9116 E SDIP0 6 C9117 F SDIN0 5 10;B C9107 G 4 VOLTAGE: VIEW MODE, LCD ON FBMH1608HL601 1608 3 J C2-17300/SG314-J L9101 VDDIO 10;B C9109 H 1.8 10;B C9103 I 2 CA1 C9101 10;B J 1 0.1;B C9112 CN911 VDDIO VDDIO GND GND SLVS0N SLVS0P GND SLVS1N SLVS1P GND SLVSCN SLVSCP GND SLVS2N SLVS2P GND SLVS3N SLVS3P GND AGND VAA VAA VAAPIX VAAPIX AGND GND FLASH SHUTTER GPI3 GPI2 GPI1 GPI0 GND RESET_N SCL SDA GND EXTCLK GND 0.8V VDD VDD VDDPLL VDDPLL K C R9103 0;1/16Z Z1 A_GND TO CP1(CAA)CN901 B B L9104 FBMH1608HL601 1608 A A 1 2 3 4 5 6 7 8 9 10 C9 11 12 13 14 15 16 17 18 19 CP1 BOARD (CAA) LEVEL SHIFT MAIN CIRCUIT WAVEFORMS K TEST POINT LOCATION CAA J 1 VDDIO 2 C1-17300/SG314-J 3 4 SLVSD0N 5 SLVSD0P 6 7 0.8V REG GND NP 6 5 VOUT 4 VDD3 VIN GND C9009 0.22;B Z1 1 2 3 VCONT H SLVSCN 11 SLVSCP 12 13 VDDPLL 1608 1 2 PAON2 10 R9008 10K;1/16J VSS CE VDDSLVS_TX R9005 2.2K;1/16J VIN C9001 1;B PAON1 VOUT TK70628HCL-G C9003 4.7;B 4 3 CMOS1.8V 9 SLVSD1P C9013 1;B XC6221B082G QXC6221B082GP C9011 1;B I IC901 8 SLVSD1N 2.8V REG IC903 SLVSD2N 14 SLVSD2P 15 16 SLVSD3N 17 SLVSD3P 18 19 TO DMA 20 TK70628HCL-G QTK70628HC-GG VAAPIX VAAPIX 22 1005 R9003 0;1/16Z 23 24 25 CMOS1.8V 26 VDDIO R9006 4.3K;1/16J GND VOUT 6 5 4 1608 NP VIN C9006 10;B C9002 0.22;B G GND 1005 R9004 0;1/16Z VDD3 C9004 1;B 1 2 3 PAON2 VCONT 21 VAA2.8 2.8V REG IC902 FLASH 27 SHUTTER 28 GPI3 29 GPI2 30 GPI1 31 GPI0 32 33 F 34 RESET_N SCL 35 SDA 36 37 38 ADCK TO DMA PAON2 PAON2 39 40 VDDSLVS_TX 41 A_I2CSCLK TO DMA TO DMA 42 CMOS1.8V SCL Q9001 RUM003N02 43 44 VDDPLL R9015 1.5K;1/16J PAON1 R9013 22;1/16J E PAON1 Z1 CMOS1.8V VDD3 VAA2.8 CMOS1.8V TO DMA IC101 PIN AE12 XOUT 1V/div 10ns/div IC101 IC101 PIN P3 ADCK 500mV/div 40ns/div IC101 PIN AB25 IC101 PIN AD22 LMCLK 1V/div 20ns/div IC101 IC101 PIN W17 LCDVD IC101 PIN W20 CLK24M 1V/div 10ns/div IC101 PIN AD20 LCDHD IC101 PIN AD13 VPIXCLK 1V/div 4ns/div WAVEFORM PIN AB23 A_D4CKOUT 1V/div 10ns/div K J D4CKIN 1V/div 4ns/div I PIN Y2 AMCLK 1V/div 20ns/div 1V/div 2ms/div 1V/div 10µs/div H G WF-SG314_MAIN F E Z4 D Q9002 RUM003N02 A_I2CSDATA Z3 LOCATION R9016 1.5K;1/16J R9014 22;1/16J VDD3 VAA2.8 Z2 TEST POINT TO CA1 CN911 VDDIO D CN901 VDDIO VDDIO GND GND SLVS0N SLVS0P GND SLVS1N SLVS1P GND SLVSCN SLVSCP GND SLVS2N SLVS2P GND SLVS3N SLVS3P GND AGND VAA VAA VAAPIX VAAPIX AGND GND FLASH SHUTTER GPI3 GPI2 GPI1 GPI0 GND RESET_N SCL SDA GND EXTCLK GND 0.8V VDD VDD VDDPLL VDDPLL WAVEFORM SDA TO DMA C C B B A A 1 2 3 4 5 6 7 8 9 10 C10 11 12 13 14 15 16 17 18 19 CP1 BOARD (DMA) MAIN ZFWR DMA K C1205 0.1;B ZFRD K L2 L1 VSSQ DSCKP L3 BA1 DSCKN DQ6 DSBA0 L4 BA0 DQ7 DSBA1 L9 VDDQ DQ4 DQ5 DQM2 DQS2 DQ18 DQ3 DQ19 DQ22 DQ23 DQS0 DQM0 DQ16 DQ17 D2 DQ20 D3 DQ21 D11 DSA10 DQ1 DQ2 D9 DSA3 DSA1 D10 ONENAND_RDY DSA0 D1-17300/SG314-J VOLTAGE: VIEW MODE, LCD ON SDDAT0 C1201 1;B BLON AC15 VSS_USB DQS2 H23 AC16 VSS_USB DQ19 H25 AC17 VSS_USB DQ18 H24 A1 VSS DQ17 J20 B1 VSS DQ16 H21 C1 VSS DCKP J23 L1 VSS DCKN J24 AC1 VSS DA9 K21 IC101 E SYSTEM ASIC Y7 VSS DQS1 P25 Y8 VSS DQ11 R20 W9 VSS DQ10 R21 L10 VSS DQ9 T20 M10 VSS DQ8 R23 HOTLINE T11 VSS DQM0 T24 ZBOOT_COMREQ Y11 VSS DQS0 T25 ASIC_SDO G12 VSS DQ3 U23 ASIC_SDI K12 VSS DQ2 U24 ASIC_SCK T12 VSS DQ1 U21 MRST W12 VSS DQ0 V23 NAND_RESET G13 VSS SDO U25 ZUSBDET G14 VSS SDI V24 ZAVJACK K14 VSS SCK V25 ZCARD T14 VSS ZSREQ W24 PLLEN G15 VSS TEST1 U20 K15 VSS TEST0 V21 T15 VSS TCLKI1 W25 TCLKI0 Y24 G16 VSS P16 VSS PSELTST V20 PSELCLK AA24 A_I2CSCLK N20 VSS CLKSEL1 W21 A23 VSS CLKSEL0 AA25 AA3 AB2 AB3 AC4 Y6 GPIOE19 Y5 GPIOE18 Y3 GPIOE17 W5 GPIOE16 AA2 AB1 GPIOE15 Y2 GPIOE14 AA1 GPIOE13 Y1 GPIOE12 W1 GPIOE11 V1 GPIOE10 U1 GPIOE9 T1 GPIOE8 R1 GPIOE7 P1 GPIOE6 N1 GPIOE5 M1 GPIOE4 P2 GPIOE3 P3 GPIOE2 GPIOD0 R6 GPIOE1 SDIN0 N3 GPIOE0 SDIP0 P6 LCDCK SDIN1 N2 DP SDIP1 N5 REXT SCKIN N6 DM SCKIP N7 VBUS SDIN2 M2 XI SDIP2 M5 XO SDIN3 M3 COMPV SDIP3 L3 VREFV CKIN M6 IREFV ADCK L2 YOUT GPIOF46 L6 UOUT GPIOF45 K2 VOUT GPIOF44 L5 COMPAO GPIOF43 K1 VREFAO GPIOF42 K3 AOUT GPIOF41 K6 VREFAI GPIOF40 J1 AIN0 GPIOF39 J6 AIN1 GPIOF38 J2 AIN2 GPIOF37 J3 AIN3 GPIOF36 H1 AIN4 GPIOF35 J5 AIN5 GPIOF34 H2 AIN6 GPIOF33 H6 AIN7 GPIOF32 G2 GPIOD11 GPIOF31 H5 GPIOD10 GPIOF30 G1 GPIOD9 GPIOF29 H3 GPIOD8 GPIOF28 F2 GPIOD7 GPIOF27 F1 GPIOD6 GPIOF26 E2 GPIOD5 GPIOF25 G3 GPIOD4 GPIOF24 E1 GPIOD3 GPIOF23 D2 GPIOD2 GPIOF22 G6 GPIOD1 GPIOF21 GPIOE22 Y18 GPIOE21 AE21 GPIOF20 GPIOE23 AE22 GPIOF19 GPIOE24 AA19 D1 AC5 AE4 AD4 AE5 AD5 AD6 AE8 AE6 AD7 AC6 AE7 AD8 AD9 AE9 AE10 AE11 AD10 W10 AD11 AE12 AE13 AD12 AE15 AE14 AE16 AD13 Y14 AD14 W14 AD15 Y15 AE17 W15 AD16 Y16 AE18 AA17 AD17 W16 AE19 AD18 AD19 Y17 AE20 AA18 AD20 W17 ZSREQ CLOCK GEN D4_FSEL R1019 0;1/16Z VDD3 PLLEN R1021 10K;1/16J QAK8113L----G AK8113 IC111 4 5 6 R1256 100;1/16J R1023 220;1/16J C1001 1000P;B 4 3 2 1 6 5 8 7 RB104 150 VSS CLKIN VDD 3 2 1 TO MIC(R) LCDD7 8 7 LCDD6 4 3 LCDD5 6 5 LCDD4 2 1 RB103 LCDD1 LCDD0 1 JW183 AWG32/AWG30 MIC(R) 1 JW182 AWG32/AWG30 A_GND 1 JW181 AWG32/AWG30 MIC(L) 1 MICR C3 3 AUDIO_LOUT TO MIC(L) 1 1 4 200 RB183 CB182 1;B 3 2 2 4 2 C2 4 2 2.2K RB182 D6 R1801 10;1/16J BICK C5 LRCK B6 1 RB184 100K 3 SDTO D5 SDTI B2 B1 A2 B3 C4 VDD3 BCLK LRCLK ADCDAT SA8 SA7 SA11 A4 DSA8 DSA7 ! L1301 EXC24CF900 C6 AUDSD AUDCK USBD+ Y_OUT Pr_OUT AUDIO_LOUT AUDIO_ROUT 2 L1006 FBMH1608HL300 1 2 3 4 5 6 7 8 9 L1304 BK1005HM102 10 AUDPDN TO USB & AV CN110 AV_JACK USB_VBUS USB_DUSB_D+ Pb_OUT Y_OUT Pr_OUT LINE_L GND LINE_R Z1 Z3 Z4 C1804 0.1;B C1805 0.1;B C1802 4.7;B C1811 4700P;B Z2 4 3 SDDAT1 1 2 3 4 5 6 7 Pr-in C1506 1;B VOUT UOUT C1507 1;B C1509 1;B standby SW 17 Pb-in 19 Py-in 20 VDD 11 12 75;1/16D R1537 13 VDD3 14 15 16 17 VCC_C IC153 AN13208A QAN13208A---P Pb-out VCC_Y Z1 Z2 Z3 Z4 VIDEO DRIVER 1608 C1511 4.7;B L1502 10;M A_GND 16 18 1608 Filter SW2 YOUT TO IC101 9 10 SDDET 15 14 13 12 11 Filter SW1 C1510 10;B VDD3 1608 TO PWA 1608 L1501 10;M R1534 75;1/16D VMUTE BOOST5V 8 SDWP ZCARD R1529 75;1/16D FILTERSEL Y_OUT Pr_OUT Pb_OUT SDDAT0 VAA2.8 Py-out 10 9 8 7 6 D C SDDAT2 R1122 1M;1/16J 1608 R1301 0;1/16Z L1303 BK1005HM102 SDDAT3 Pr-out 7P;CH 1 F5007 1A32V R1302 0;1/16Z R1303 0;1/16Z R1304 0;1/16Z Pb_OUT 7P;CH C1122 VDD1.8 18 C1514 4.7;B 1608 BACKUP_BAT TO SYA 19 20 TO TB1 CN142 CN101 GND SDCLK GND SDCMD SDDAT3 SDDAT2 SDDAT1 SDDAT0 SDWP GND GND ZCARD SDDET VDD3 VDD3 GND GND GND BACKUP_BAT GND C1515 4.7;B 1608 Z1 B Z2 R1516 75;1/16D R1517 91;1/16D R1519 91;1/16D D_GND C1513 4.7;B 1608 1 2 3 4 5 I/F_GND C1512 2.2;B BOOST5V A5 USBD- C1121 GND_C 3 4 R1121 VDD3 VAA2.8 DSA11 USB_VBUS TO PWA ZAVJACK SDCMD 1K;1/16D XIN XOUT VDD3 B 48.000MHz 2 1 VDD1.2 VDD1.8 CK DQ6 NC SA4 DSA4 DQ15 A15 A11 A6 Q1301 DTC144EM DACDAT CDTIO/CAD0 A4 CC LK /SCL B4 A1 2 4 AUDEN HiON 3.0V REG NP VSS2 A6 DVDD A5 C1810 2.2;B 6 GND 5 VOUT 4 VIN VCOUNT GND 1 2 3 B5 E4 AUDIO CODEC C1 RIN1/DMCLK AT MD D1 LIN1/D P M R/D MPW 4 1 D4 IC182 AK4649ECB QAK4649ECB-LJ E1 RIN2 D2 LIN2 3 E5 E3 LOUT E2 MIN CB183 1;B 3 IC181 TK70630HCL-G QTK70630HC-GG E6 C1812 4.7;B 1608 0.1;B C1818 3 VDD3 VBDET D3 ROUT MICL RB102 0 1 LCDVD 7 LCDHD Y7 7 Y5 Y6 1 Y4 8 Y3 2 3 5 Y2 Y1 JW185 AWG32/AWG30 SP- ZUSBDET AUDIO_ROUT 4 2 8 4 6 2 1 PSELCON UV7 UV5 UV6 D4_FSEL VMUTE UV4 UV3 5 UV2 UV1 Y0 RB110 47 5 6 5 8 7 7 4 3 6 3 RB109 47 6 8 4 RB106 47 1 2 1 WHITE 1 LCDD3 LCDD2 150 SP- VDD3 JW184 AWG32/AWG30 A_GND LMCLK L1007 BK1005LL241 JW186 AWG32/AWG30 SP+ VDD3 A_D4CKOUT MRST TXD1 100;1/16D FSEL 1 RED CLK24M HOTLINE W_SD_RESET R1053 OE CLKOUT SP+ R1024 220;1/16J 1AV4V10B8820G X1102 CMOS1.8V VDD1.2 /CK DQ7 A10 DQ15 NC NC NC A14 NC A8 A5 NC A2 VCCo SA5 NC SA9 A6 VDD A3 NC A1 NC NC A12 VSSd NC ASIC_SCK SDCLK CMOS1.8V VSSd VSSQ VSSQ VDDQ VDDQ DQ4 DQS2 DQ5 VSSQ DQM2 DQ18 VDDQ DQ23 DQ19 DQ22 DQ3 DQ16 OEBo DQS0 DQM0 SA10 DQ17 WEBo DQ21 IO2 DQ20 IO3 ASIC_SDI VDD3 R1802 0;1/16Z RB107 47 UV0 1 XIN USBD- USBD+ VBDET VPIXCLK XOUT YOUT TO IC153 UOUT VOUT ZPI_AD FPI_AD LENS_TEMP HALL_OUT FPIOUT AUDPDN ZPIOUT AUDSD AUDCK DACDAT AUDEN ZBOOT_COMREQ ADCDAT AMCLK BCLK LRCLK SLVSD0N SLVSD0P SLVSD1P SLVSD1N SLVSCN SLVSCP SLVSD2N SLVSD3N SLVSD2P IO11 ASIC_SDO VDD3 2 L1003 BLM15BB100SN1 0.1;B C1006 R1008 10K;1/16J R1025 0;1/16Z L1005 BLM15BA330SN1 SLVSD3P ADCK WLANON E DQ0 R1014 100;1/16J R1090 44.2;1/16D 0.1;B C1010 R1041 2.4K;1/16J R1027 100;1/16J VDD3 R1028 4.7K;1/16J VDD3 SHUTTER GPI3 GPI2 GPI1 GPI0 TO CAA A_I2CSDATA C BLON A_I2CSCLK PAON1 FLASH R1032 10K;1/16J PAON2 R1020 100;1/16J VDD1.8 WLANON2 BOOST5V R1015 4.7K;1/16J TO TCA R1056 BOOST5V TO CAA VDD1.8 0;1/16Z VDD1.8 GPI3 VDD3 RESET_N VDD3 GPI2 NC DQ1 HALL_OUT GPI1 SA3 DQ2 GPIOE25 AD21 C25 VSS AD25 VSS F3 DQ1 DQ3 B25 VSS AC25 VSS F5 DQ2 DQ4 GPIOE26 AC20 E5 INTo DQ5 DQS0 GPIOE27 AC21 E3 SA1 DQ6 DQM0 GPIOE28 Y19 D3 IO9 DQ8 DQ7 GPIOE29 AD22 VSS SA0 DQ9 A25 VSS GPIOF18 GPI0 DQ10 AE24 VSS GPIOF17 STATE1 DQ11 AD24 VSS AE25 STATE2 DQS1 AC24 VSS GPIOF16 FLASH DQM1 RXD1 GPIOF15 ZPIOUT DQ12 A_HDMI_INT GPIOF14 FPIOUT DQ13 GPIOB0 AA20 GPIOF13 SHUTTER+ DQ14 GPIOB1 AC22 GPIOF12 LENS_TEMP CMOS1.8V DQ15 GPIOB2 AA21 GPIOF11 LENS_EN VAA2.8 RESET_N DSA3 C24 VSS GPIOF10 VAA2.8 CMOS1.8V SHUTTER F DSA2 A24 VSS GPIOF9 LENS_SCLK DSA1 B24 VSS GPIOF8 LENS_RESETN VDD3 GPIOB3 Y20 GPIOF7 FPI_AD ZPI_AD ADCK AE23 VSS GPIOF6 SLVSD0P SLVSD0N ZRST AB24 GPIOB4 Y21 GPIOF5 PS D4CKO AB23 D4CKIN AB25 AD23 VSS GPIOF4 LENS_SDI C23 VSS N23 VSS AC23 VSS GPIOF3 SLVSD1P SLVSD1N DSA0 MCLK W20 B23 VSS LENS_SDO DSA10 PLLEN AA23 M16 VSS R16 VSS SLVSCN ZRAS ZDSCS TSCKIN Y25 L16 VSS PAON2 A_I2CSDATA CLK24M ZCAS DSBA1 DQM1 P24 DQ4 T23 SLVSCP DSBA0 DQ12 P23 K11 VSS SLVSD2P DSCKE DSA12 ZDSWE DQ13 P21 HINGE SLVSD3P DGATE0 DQ14 R19 DQ5 R25 SLVSD2N DSA6 DQ15 N25 G11 VSS SLVSD3N DSA8 DSA7 DA0 M20 ZSREQ TO CAA DSA4 DA10 P19 DQ6 T21 PAON1 G DSA5 DSA11 DBA1 M24 DQ7 R24 TO SYA H NAND_RESET A8 DSA9 ZRAS M23 P10 VSS BOOST5V E5 DQ16 ZCAS M21 R10 VSS BOOST5V E4 C1304 1;B VDD3 VDD1.8 E3 6 5 4 VDD3 VDD1.8 E2 Q1302 UP0431300 T7 VSS A16 A7 E6 E1 DQ17 ZDCS M25 DA3 N24 A_I2CSCLK D10 D11 D12 DQ18 DBA0 L21 DA2 P20 R7 VSS D9 DSCKP ZDWE M19 DA1 N21 A_I2CSDATA D8 DSCKN DA12 L19 K7 VSS M7 VSS D7 DQ19 DCKE L24 U6 VSS P7 VSS DQ20 DSRON L23 T6 VSS DACDAT D6 DGATEO L25 Y7 A_HDMI_INT DQ21 DA7 K23 BCLK VSS D5 DQS2 DA11 K24 LRCLK L7 D4 1 2 3 AE3 VSS D3 R1352 10K;1/16J Y6 D2 4 AD3 VSS D1 C10 C11 C12 3 19 20 Y5 C9 2 18 AC3 VSS C8 1 17 C3 VSS Y4 C7 TO SPEAKER UNREGST B3 VSS Y3 C6 AMCLK 14 15 DQ23 DA8 K20 EV3XA QEV3XA------N A3 VSS Y2 13 C5 DQ22 SPN Y1 12 C4 DQM2 MCKI AE2 VSS C3 DQ24 MCKO AD2 VSS Y0 C2 DQ25 DA UV7 C1 B10 B11 B12 DQ26 DA4 J21 DGATEI K25 B9 CSN/S AC2 VSS B8 PDN 11 W2 VSS UV6 B7 VCOC 9 10 V2 VSS UV5 B6 R1815 10K;1/16J U2 VSS UV4 B5 DQ14 DQ27 SPP T2 VSS UV3 8 B4 AVDD TO SYA UV2 BOOST5V 7 B3 DQ13 DQS3 DA5 J25 DA6 L20 B2 R1814 10K;1/16J R2 VSS B1 A10 A11 A12 C1801 0.1;B UV1 FLCTL A3 I2C C2 VSS A2 VSS3 B2 VSS UV0 A1 SVDD VPIXCLK W12 DNU VSS1 2 DQ29 VCOM A2 VSS A15 E8 RPBo E7 4 AE1 VSS AL3.2V W10 DNU W11 DNU 3 Z1 DQM2 G23 DQ31 DQ30 2 30 AC14 VSS_USB NC E9 RB181 20K VDD3 DQ20 G24 NC E10 W3 DNU 1 29 AC13 VSS_USB DQ14 E11 W2 DNU A3 LCDD1 DQ21 G25 NC F1 DQ13 E12 W1 DNU DSA5 DQ22 H20 V11 VCCo V12 VSSo ZFRD A13 DQ23 G21 R5 VSS_LVDS T5 VSS_LVDS A1 DSA6 ZFWR DSA9 DQ24 F21 AA9 AVSS33D_VDAC LCDD2 CKE F2 DQ29 DSCKE C1206 0.1;B DQ25 G20 Y10 AVSS33AR_VDAC LCDD3 V10 VSSQo A9 Y9 AVSS33A1_VDAC LCDD4 D13 C1208 0.1;B LCDD5 SA6 F3 A7 LCDD6 DQ26 F24 A0 F5 V9 VSSQo A4 DQ27 F25 A12 NC F6 D12 A2 DQS3 F23 AC7 AVSS33A_ADAC AA7 AVSS33A1_ADC DQ12 NC F9 NC F8 DQM3 DQM1 DQS1 DQ12 F10 DQ29 F4 NC DQM3 E23 DQ30 DQS1 F11 V8 NC A9 AA11 AVSS12_S1PLL DQ31 DQM1 F12 A11 F7 DQ28 DQ28 DQ30 G1 D11 D14 I DQ27 DQ31 G2 V6 NC D15 DQ11 DQ11 G9 V7 NC ZCS0 DQ10 DQ10 G10 V5 NC NC DQ28 E24 VSSQ G11 V4 IO0 A10 DQ29 E25 VSSQ H1 PROGRAM FLASH V3 NC DQ26 VDDQ G12 D9 VSSo DQ30 F20 Y12 AVSS12_S2PLL LCDD0 28 N16 VDD12 G17 VDD12 AA12 AVSS12_CPLL D5 DQ9 DQ25 VDDQ H2 D10 NC D15 D23 V1 VSSo NC D14 C22 L15 VDD12 DQ8 DQ9 H9 DQ26 H3 DDR SDRAM NC AA14 VDD12 ZCAS DQ25 H4 DQ28 G3 V2 VCCo J ZRAS ZDSWE DQ24 DQ27 G4 U11 IO15 D0 DQS3 ZDSCS DQM3 U8 NC U10 IO7 D8 DSA12 SA12 K4 U9 VCCQo C1017 1;B 27 U5 IO8 D4 C1018 0.01;B 26 U4 NC NC D13 E20 K9 DQ8 H10 NC R14 VDD12 K12 K11 K10 IC121 K5W1213LCA-AK60 QXXAGB050---N NC D12 E19 L10 DQ24 J3 DNU D11 B22 L14 VDD12 L11 VSSQ H12 DNU AA13 VDD12 M1 L12 VSSQ J2 DNU D10 C21 M2 VDDQ H11 DNU W13 VDD12 M3 VDDQ J1 U12 VSSd D7 M4 T9 VCCQo U2 CEBo D15 D6 M9 T8 IO12 DNU D9 F18 M12 M11 M10 T7 VCCQo DNU D0 D8 A22 8 24 25 VDD3 D1 GPIOA27 GPIOA26 GPIOA25 D7 B21 T13 VDD12 LCDD7 TO DMB D C1204 0.1;B D1 D0 ONENAND_CLK ONENAND_AVD GPIOA23 GPIOA24 GPIOA22 GPIOA21 GPIOA20 GPIOA18 GPIOA19 GPIOA17 GPIOA16 GPIOA14 GPIOA15 GPIOA13 GPIOA12 GPIOA11 GPIOA9 GPIOA10 GPIOA8 GPIOA7 GPIOA6 GPIOA4 GPIOA5 GPIOA3 D6 C20 R13 VDD12 N1 T6 VCCQo A13 PAON1 PAON2 LCDEN LCDRESET FILTERSEL LCDSD LCDCK R1001 10K;1/16J A16 A15 A14 A9 A12 A13 A8 A7 A11 A6 A10 A5 A4 A2 A1 A3 GPIOA2 GPIOA1 GPIOC0 GPIOA0 GPIOC1 GPIOC2 GPIOC3 D5 A21 K13 VDD12 L13 VDD12 N2 /WE J9 U1 VDD 51;1/16J GPIOC5 GPIOC4 GPIOC6 GPIOC7 GPIOC8 GPIOC9 GPIOC21 GPIOC10 GPIOC22 R12 VDD12 N3 T10 IO6 D3 D4 B20 N4 /CAS J10 U3 NC D2 N9 DQM3 J4 T11 IO14 D7 D2 F17 N12 N11 N10 T5 IO1 ZCS0 E10 C10 F11 A10 B10 E11 C11 A11 B11 F12 B12 A12 F13 C12 E13 B13 A13 C13 E14 F14 A14 B14 C14 F15 A15 B15 C15 E16 A16 B16 C16 F16 A17 B17 C17 B18 A18 E17 A19 C18 B19 A20 GPIOC11 GPIOC23 GPIOC12 TDO GPIOC13 RTCK A9 GPIOC15 TDI TCK B9 GPIOC14 TMS GPIOC16 TRST GPIOC17 TSEL0 C9 P1 A14 SDDAT1 SDWP SDCMD SDDET ONENAND_RDY L1002 BLM15BA330SN1 PS LENS_SDO LENS_SDI SHUTTER+ STATE1 STATE2 LENS_EN LENS_SCLK LENS_RESETN TSEL1 GPIOC18 TGVD TGHD TSEL2 GPIOC20 GPIOF0 GPIOC19 GPIOF1 F10 D3 C19 AD1 VSS F B8 4 23 16 F9 6 22 ST_CHG A8 DQ31 D25 21 ZCHGDONE C8 R15 VDD12 LMCLK ST_CHG E8 LCDRESET LCDHD 6 TDI A7 ZCS D24 19 4 FLCTL B7 ZRE F19 20 5 TMS C7 ZWE E21 LCDVD ZCHGDONE TCK C6 P15 VDD12 18 3 TDO A6 M15 VDD12 17 1 RTCK TRST B6 N15 VDD12 16 CN105 AL3.2V AL3.2V FLCTL ZCHGDONE CHG BOOST5V NC NC NC GND GND GND GND GND GND UNREGST UNREGST UNREGST UNREGST UNREGST TO ST1 CN541 VDD3 G9 P2 T4 AVDBo D12 3 A5 GPIOF2 AVDD33A1_ADC AVDD33A_ADAC B5 LCDEN 13 14 TO PWA F8 LCDCK LCDSD 12 15 LCDCA C5 R1029 LCDAN 11 A4 0;1/16Z 9 10 B4 P3 /CS J12 U7 VSSQo 2 8 F7 P4 DQS3 K3 U6 VSSQo 7 HINGE E6 P5 /RAS J11 D8 RB111 10K 6 F6 P6 T12 VDD 3 4 5 C4 P7 T3 CLKo D14 5 3 SDDAT2 SDCLK 2 7 4 VDD3 6 R1002 1 AVDD33A1_VDAC L12 VDD12 AVDD33A2_VDAC VDD33 AVDD33D_VDAC VDD33 AC9 AC10 AA10 AA6 AA8 VDD_USB33 AA5 AA16 AA15 P5 VDD_LVDS33 VDD33 VDD33C2 VDD33 VDD33F E7 VDD_USB33 VDD33F VDD33 VDD33G E12 E18 E15 Y23 W23 AC19 AC18 AC8 VDD33 E9 VDD33 G5 VDD33A K5 VDD33A V5 VDD33C1 Y13 VDD33OSC VDD18DDR VDD12 VDD18DDR VDD12 VDD18DDR VDD12 VDD_LVDS12 R11 VDD12 W11 AC11 AC12 U19 T19 N19 K19 J19 VDD18DDR U5 VDD18DDR R3 AVDD12_CPLL T3 AVDD12_S1PLL U3 AVDD12_S2PLL VDD12 V3 VDD12 VDD12 W3 VDD12 V6 VDD12 VDD12 W6 P8 T2 SA2 D6 1 G J7 P9 T1 NC VDD3 GPIOE20 Z2 U7 VDD12 VDD12 H N10 G10 VDD12 N11 M11 L11 VDD12 C1047 4.7;B 1608 1.8 P11 VDD12 TO VF1 CN172 CN103 GND GND GND GND GND GND GND HINGE VDD3 LCD_AN LCD_CA LCDSD LCDCK LCDEN LCDRESET VD HD GND LMCLK GND LCDD7 LCDD6 LCDD5 LCDD4 LCDD3 LCDD2 LCDD1 LCDD0 VDD3 GND RB101 10K 5 1.2 VDD12 I VDD1.8 C1048 4.7;B 1608 VDD1.2 8 C1005 4.7;B 1.2 C1012 0.1;B VDD1.2 R1010 1K;1/16J 3.3 VDD3 2 0.1;B C1054 0.1;B 7 0.1;B C1053 1 C1052 C1013 0.1;B 0.1;B 0.1;B 1608 C1064 C1065 C1066 0.1;B SDDAT3 VDD3 VDD1.2 VDD1.8 C1058 0.1;B P12 P11 P10 R12 NC D1 3.3 VDD3 R1 VDD K2 ONENAND_AVD 0.1;B R2 VSSd K1 ONENAND_CLK C1051 R3 R11 DQ0 DSA2 0.1;B R4 R10 IO13 C1207 0.1;B DQ0 C1063 R5 R9 IO5 D13 C1057 0.1;B R6 R8 IO4 D5 J R7 IO10 D4 RDYo 1608 C1209 4.7;B VDD1.8 A A 1 2 3 4 5 6 7 8 9 10 C11 11 12 13 14 15 16 17 18 19 CP1 BOARD (DMA) MAIN [UPPER-LEFT] K K DMA D1-17300/SG314-J J J VOLTAGE: VIEW MODE, LCD ON I E D Z2 SDDAT0 SDDAT1 SDDAT2 SDDAT3 SDWP SDCMD GPIOC17 GPIOC16 GPIOC15 GPIOC14 GPIOC13 GPIOC12 GPIOC7 GPIOC8 GPIOC9 GPIOC10 GPIOC11 7 L14 VDD12 HINGE 8 9 LCDAN 11 LCDCA LCDSD 12 15 L15 VDD12 M15 VDD12 LCDCK N15 VDD12 LCDEN P15 VDD12 LCDRESET R15 VDD12 13 14 AA14 VDD12 TO PWA N16 VDD12 LCDVD 16 E G17 VDD12 LCDHD 17 AA12 AVSS12_CPLL 18 AA11 AVSS12_S1PLL LMCLK 19 Y12 AVSS12_S2PLL 20 21 22 23 24 25 LCDD7 AC7 AVSS33A_ADAC LCDD6 AA7 AVSS33A1_ADC LCDD5 Y9 AVSS33A1_VDAC LCDD4 Y10 AVSS33AR_VDAC LCDD3 AA9 AVSS33D_VDAC R5 VSS_LVDS LCDD2 26 T5 VSS_LVDS LCDD1 27 29 D AC13 VSS_USB LCDD0 28 AC14 VSS_USB VDD3 AC15 VSS_USB 30 AC16 VSS_USB Z1 AC17 VSS_USB A1 VSS B1 VSS C1 VSS L1 VSS AC1 VSS IC101 AD1 VSS CN105 AL3.2V AL3.2V FLCTL ZCHGDONE CHG BOOST5V NC NC NC GND GND GND GND GND GND UNREGST UNREGST UNREGST UNREGST UNREGST TO ST1 CN541 B A 1 AE1 VSS 1 A2 VSS AL3.2V 2 VPIXCLK B2 VSS UV0 C2 VSS UV1 R2 VSS UV2 T2 VSS UV3 U2 VSS UV4 V2 VSS FLCTL 3 ZCHGDONE 4 ST_CHG 5 6 ZCHGDONE ST_CHG TO SYA C BOOST5V 7 8 9 10 11 12 13 14 15 16 UNREGST 17 18 19 20 UV5 W2 VSS UV6 AC2 VSS UV7 AD2 VSS Y0 AE2 VSS Y1 A3 VSS Y2 B3 VSS Y3 C3 VSS Y4 AC3 VSS Y5 AD3 VSS Y6 AE3 VSS Y7 T6 VSS BCLK U6 VSS LRCLK K7 VSS L7 2 3 M7 VSS DACDAT P7 VSS A_I2CSDATA R7 VSS 4 A_I2CSCLK VDD3 VDD1.8 TO DMB VDD3 5 VDD1.8 6 7 8 T7 VSS Y7 VSS Y8 VSS W9 VSS L10 VSS M10 VSS C EV3XA QEV3XA------N VSS A_HDMI_INT 9 10 C12 11 12 13 SYSTEM ASIC 14 BLON LCDRESET ONENAND_AVD PAON1 PAON2 R14 VDD12 10 FILTERSEL LCDEN R1001 10K;1/16J A16 A15 A14 A13 A12 A9 A11 A8 A10 A7 A6 A5 A4 A3 A2 A1 AA13 VDD12 15 16 B A 17 18 19 GPIOA26 GPIOC18 F W13 VDD12 6 GPIOA25 GPIOC19 T13 VDD12 5 GPIOA24 GPIOC20 R13 VDD12 4 GPIOA23 GPIOC21 L13 VDD12 3 GPIOA22 GPIOC22 K13 VDD12 2 GPIOA21 TDO GPIOC23 R12 VDD12 1 GPIOA20 TCK RTCK GPIOA19 TDI LCDSD LCDCK TMS GPIOA18 TRST GPIOA17 TSEL0 GPIOA16 TSEL1 GPIOA15 TGVD TGHD TSEL2 GPIOA14 GPIOF0 G E10 C10 F11 A10 B10 E11 C11 A11 B11 F12 B12 A12 F13 C12 E13 B13 A13 C13 E14 F14 A14 B14 C14 F15 A15 B15 C15 E16 A16 B16 C16 F16 A17 B17 C17 B18 A18 E17 A19 GPIOA13 A9 GPIOA12 B9 GPIOA11 C9 GPIOA10 F10 GPIOA9 B8 GPIOA8 F9 GPIOA7 A8 GPIOA6 C8 GPIOA5 E8 GPIOA4 A7 GPIOA3 B7 GPIOA2 C7 GPIOA1 C6 GPIOA0 A6 GPIOC0 B6 GPIOC1 G9 GPIOC2 A5 GPIOC3 B5 GPIOC4 F8 GPIOC5 C5 ONENAND_RDY L1002 A4 R1002 7 B4 H 51;1/16J 1 F7 BLM15BA330SN1 PS SHUTTER+ LENS_SDO LENS_SDI LENS_SCLK STATE2 LENS_EN LENS_RESETN TDO FLCTL STATE1 TDI RTCK TMS TCK RB101 10K 5 E6 GPIOF1 AVDD33A_ADAC AVDD33A1_ADC AVDD33A1_VDAC AVDD33A2_VDAC AVDD33D_VDAC L12 VDD12 VDD_USB33 AC9 AC10 AA10 AA6 AA8 VDD_LVDS33 AA5 AA16 AA15 P5 VDD33 VDD33 E7 VDD_USB33 VDD33 VDD33 VDD33 VDD33 VDD12 VDD33 VDD12 VDD_LVDS12 E12 E18 E15 Y23 W23 AC19 AC18 AC8 VDD33A VDD12 E9 VDD33A VDD12 G5 VDD33F VDD12 K5 VDD33C1 VDD12 V5 VDD33F VDD12 Y13 VDD33C2 VDD12 R11 VDD12 W11 AC11 AC12 U19 T19 N19 K19 J19 VDD33G U5 VDD18DDR R3 VDD33OSC T3 VDD18DDR U3 VDD18DDR V3 VDD18DDR W3 VDD18DDR V6 AVDD12_CPLL W6 AVDD12_S1PLL J7 AVDD12_S2PLL U7 VDD12 VDD12 N10 G10 VDD12 P11 VDD12 VDD12 N11 M11 L11 VDD12 C1047 4.7;B 1608 F F6 1.8 G TO VF1 CN172 CN103 GND GND GND GND GND GND GND HINGE VDD3 LCD_AN LCD_CA LCDSD LCDCK LCDEN LCDRESET VD HD GND LMCLK GND LCDD7 LCDD6 LCDD5 LCDD4 LCDD3 LCDD2 LCDD1 LCDD0 VDD3 GND C4 GPIOF2 1.2 VDD12 VDD1.8 C1048 4.7;B 1608 VDD1.2 GPIOC6 1.2 C1012 0.1;B VDD1.2 6 C1066 0.1;B VDD3 3.3 VDD3 4 0.1;B C1054 0.1;B 3 0.1;B C1053 VDD3 C1052 0.1;B R1010 1K;1/16J 0.1;B C1065 8 C1064 2 0.1;B C1013 0.1;B C1051 1608 C1058 0.1;B 0.1;B C1005 4.7;B H C1063 TRST 3.3 VDD3 C1057 0.1;B SDDET SDCLK VDD3 VDD1.2 VDD1.8 I CP1 BOARD (DMA) MAIN [UPPER-RIGHT] K L9 L4 L3 L2 L1 DQ7 DQ6 BA1 BA0 VDDQ VSSQ J DSCKP L10 VSSQ DSCKN DQ6 DSBA0 L11 DQ7 DSBA1 M1 L12 VDDQ DQM2 DQS2 DQ4 DQ5 DQ18 DQ19 DQ23 DQ3 DQ22 DQS0 DQM0 DQ16 DQ17 DQ20 DQ21 D2 DSA10 D3 D11 DQ1 DQ2 DSA3 DSA1 D9 DSA0 D10 J ONENAND_RDY C1205 0.1;B ZFRD ZFWR K DQ0 DSA2 ONENAND_CLK SDDAT0 C1201 1;B BLON D14 C1204 0.1;B D1 CK VSSd NC /CK VDDQ DQM1 F12 PROGRAM FLASH DQS1 F11 DQ12 F10 V4 IO0 NC F8 V5 NC A11 F7 V6 NC NC F6 D10 V7 NC A0 F5 D11 V8 NC DQ29 F4 D12 V9 VSSQo SA6 F3 D13 V10 VSSQo CKE F2 NC F1 W2 DNU NC E10 NC E9 W3 DNU D8 D9 D10 D11 D12 A4 D7 SA11 D6 SA7 D5 SA8 D4 SA4 D3 DQ15 D2 NC A10 D1 C10 C11 C12 A14 NC C9 NC C8 NC C7 A5 C6 A2 C5 SA5 C4 SA9 C3 NC C2 NC C1 VDD B10 B11 B12 A12 B9 A8 B8 NC B7 VCCo B6 NC B5 A6 B4 A3 A7 E6 A1 W12 DNU NC DQ29 VSSd RPBo E7 NC A15 E8 W11 DNU NC W10 DNU DQ30 A9 DQ31 B3 DQM1 DQS1 DQ12 E1 E2 E3 E4 E5 F DSCKE DQ14 E11 B2 DQ30 A1 DQ13 E12 B1 DQ31 DSA6 W1 DNU A10 A11 A12 G DQ28 DQ29 V12 VSSo A3 DQ27 A12 V11 VCCo A2 DQ11 NC F9 DQ13 DQ14 A16 NAND_RESET A8 E A5 DSA11 DSA7 DSA8 DSA4 DQ15 A15 A11 A6 A3 DSA5 DSA9 A13 A9 A7 A4 A10 DQ23 DQ23 G21 A2 DQ24 DQ24 F21 C1208 0.1;B DQ21 DQ21 G25 DQ20 DQ20 G24 C1206 0.1;B DQ22 DQ22 H20 D DQM2 DQM2 G23 DQS2 DQS2 H23 DQ19 DQ19 H25 DQ18 DQ18 H24 DQ17 DQ17 J20 DQ16 DQ16 H21 DSCKP DCKP J23 DSCKN DCKN J24 DSA9 DA9 K21 C101 DQ31 G2 DQ30 G1 DQ10 DQ25 DQ25 G20 DSA5 DA5 J25 C DSA4 DA4 J21 DSA8 DA8 K20 DSA7 DA7 K23 DSA11 DA11 K24 DA6 L20 DQ11 G9 DQ26 DQ26 F24 DGATEI K25 DQ10 G10 DDR SDRAM A1 DQ26 DQ27 DQ27 F25 C VSSQ G11 D9 ZFRD DQ9 DQ25 VDDQ G12 D8 ZFWR H DQ8 DQS3 DQS3 F23 D DQ26 H3 DQ28 G3 D6 ZDSWE VSSQ H1 U9 VCCQo V3 NC ZCAS VDDQ H2 DQ27 G4 V2 VCCo DQM3 DQM3 E23 DQ25 H4 U8 NC V1 VSSo DQ28 DQ28 E24 VSSQ DQ9 H9 NC DQ29 E25 DQ4 DQ8 H10 T11 IO14 VSSo E DQS2 VDDQ H11 NC DQ30 F20 DQM2 VSSQ H12 T9 VCCQo U12 VSSd ZRAS DQ24 T8 IO12 IC121 K5W1213LCA-AK60 QXXAGB050---N I ZDSCS DQM3 T10 IO6 D5 ZCS0 ZCS D24 DQ31 D25 DQ5 DQ17 VDDQ J1 D4 ZWE E21 ZRE F19 VSSQ DQ20 VSSQ J2 T7 VCCQo U11 IO15 D15 D15 D23 VDDQ SA10 DQ21 T6 VCCQo U10 IO7 D14 D14 C22 DQ18 WEBo DQ24 J3 NC D13 E20 DQ19 IO2 /WE J9 T5 IO1 NC D12 E19 DQS3 /CAS J10 NC D11 B22 DSA12 SA12 K4 DQM3 J4 NC D10 C21 K9 T4 AVDBo NC F K12 K11 K10 T3 CLKo DNU D9 F18 M2 T2 SA2 DNU D8 A22 M3 /CS J12 D3 D7 D7 B21 M4 /RAS J11 U5 IO8 D0 M9 VSSd K1 DNU D6 C20 M12 M11 M10 T1 NC DNU D5 A21 N1 R12 NC DNU D4 B20 N2 R11 DQ0 DNU D1 D0 GPIOA27 D3 C19 N3 VDD K2 A13 D0 ONENAND_AVD ONENAND_CLK GPIOA26 GPIOA25 GPIOA24 GPIOA23 GPIOA22 GPIOA21 GPIOA20 GPIOA19 GPIOA18 GPIOA17 GPIOA16 GPIOA15 GPIOA14 GPIOA13 GPIOA12 GPIOA11 GPIOA9 GPIOA10 GPIOA8 GPIOA7 GPIOA6 GPIOA5 D2 F17 N4 DQS3 K3 U4 NC D15 D2 N9 R9 IO5 U3 NC D7 N12 N11 N10 R10 IO13 U2 CEBo D8 P1 DQ23 P2 DQ22 P3 DQ3 P4 OEBo P5 DQS0 P6 DQ16 P7 DQM0 P8 IO3 NC INTo SA3 P9 IO11 SA1 DQ1 SA0 DQ2 RDYo P12 P11 P10 U1 VDD ZCS0 51;1/16J GPIOA4 GPIOC12 GPIOA3 GPIOC13 GPIOA2 GPIOC14 GPIOA1 GPIOC15 GPIOA0 GPIOC16 GPIOC0 GPIOC17 GPIOC1 GPIOC18 D12 D6 E10 C10 F11 A10 B10 E11 C11 A11 B11 F12 B12 A12 F13 C12 E13 B13 A13 C13 E14 F14 A14 B14 C14 F15 A15 B15 C15 E16 A16 B16 C16 F16 A17 B17 C17 B18 A18 E17 A19 C18 B19 A20 GPIOC2 A9 GPIOC3 B9 R1 U7 VSSQo GPIOC4 C9 R2 U6 VSSQo GPIOC5 F10 GPIOC19 R1002 B8 GPIOC6 F9 GPIOC7 A8 GPIOC8 C8 GPIOC9 E8 GPIOC10 A7 GPIOC11 B7 GPIOC20 TDI TCK C7 GPIOC21 TMS C6 GPIOC22 TRST A6 TDO B6 RTCK G9 GPIOC23 A5 R3 A14 PAON1 LCDRESET FILTERSEL PAON2 LCDEN R1001 10K;1/16J A16 A15 A14 A13 A12 A9 A11 A8 A10 A7 A6 A5 A4 A3 A2 A1 ONENAND_RDY L1002 4 LCDSD LCDCK SDDAT1 SDDAT2 SDDAT3 SDWP SDCMD SDDET VDD3 3 B5 R4 T12 VDD BLM15BA330SN1 PS D1 SHUTTER+ LENS_SDO LENS_SDI LENS_SCLK STATE2 LENS_EN LENS_RESETN TDO FLCTL STATE1 TDI RTCK TMS TCK VDD3 TRST SDCLK ONENAND_AVD G R5 C1207 0.1;B D13 H R6 R8 IO4 D5 I R7 IO9 D4 IO10 1608 C1209 4.7;B VDD1.8 DSA6 DGATE0 DGATEO L25 DSRON L23 V3XAB XA------N DSCKE DCKE L24 DSA12 DA12 L19 DSBA0 DBA0 L21 ZCAS ZCAS M21 ZRAS ZRAS M23 DSBA1 DBA1 M24 ZDSCS ZDCS M25 DSA10 DA10 P19 DSA0 DA0 M20 DSA1 DA1 N21 DSA2 DA2 P20 TEM ASIC 1 DSA3 DA3 N24 A DQ15 DQ15 N25 DQ13 DQ13 P21 2 3 4 5 6 DQM1 P24 DQS1 P25 DQ11 R20 DQ10 R21 DQ9 T20 DQ8 R23 A DQ14 DQ14 R19 DQ12 P23 B ZDSWE ZDWE M19 DQ12 7 DQM1 DQS1 DQ11 DQ10 DQ9 DQ8 DQ7 8 9 10 C13 11 12 13 14 15 16 17 18 19 NC NC GND GND GND GND GND GND UNREGST UNREGST UNREGST UNREGST UNREGST TO ST1 CN541 K 8 9 10 11 12 13 UV6 AC2 VSS UV7 AD2 VSS Y0 AE2 VSS Y1 A3 VSS Y2 B3 VSS Y3 14 C3 VSS CP1 BOARD (DMA) MAIN [LOWER-LEFT] Y4 15 16 AC3 VSS Y5 UNREGST AD3 VSS Y6 17 18 19 20 AE3 VSS Y7 T6 VSS BCLK U6 VSS LRCLK K7 VSS L7 M7 VSS DACDAT P7 VSS A_I2CSDATA R7 VSS A_I2CSCLK T7 VSS VDD3 K SYSTEM ASIC VSS A_HDMI_INT Y7 VSS VDD3 VDD1.8 J EV3XA QEV3XA------N Y8 VSS VDD1.8 J W9 VSS TO DMB L10 VSS M10 VSS P10 VSS R10 VSS I ZSREQ G11 VSS HINGE K11 VSS HOTLINE T11 VSS ZBOOT_COMREQ Y11 VSS ASIC_SDO G12 VSS ASIC_SDI K12 VSS ASIC_SCK T12 VSS MRST W12 VSS NAND_RESET G13 VSS ZUSBDET G14 VSS ZAVJACK K14 VSS ZCARD T14 VSS PLLEN BOOST5V I G15 VSS K15 VSS BOOST5V T15 VSS TO SYA G16 VSS L16 VSS H PAON1 M16 VSS PAON2 P16 VSS A_I2CSDATA R16 VSS A_I2CSCLK N20 VSS TO CAA A23 VSS B23 VSS SLVSD3P C23 VSS SLVSD3N N23 VSS SLVSD2P AC23 VSS SLVSD2N A25 VSS B25 VSS LENS_TEMP C25 VSS SHUTTER+ W1 Y1 AA1 Y2 AA2 AB1 W5 Y3 AA3 AB2 AB3 Y5 AC4 Y6 AC5 AE4 AD4 AE5 AD5 AD6 AE8 AE6 AD7 AC6 AE7 AD8 AD9 AE9 AE10 AE11 AD10 W10 AD11 AE12 AE13 AD12 AE15 AE14 AE16 AD13 Y14 AD14 W14 AD15 Y15 AE17 W15 AD16 Y16 AE18 AA17 AD17 W16 AE19 AD18 AD19 Y17 AE20 A VDD1.8 VAA2.8 VAA2.8 BOOST5V B I/F_GND D_GND A A 2 3 4 5 6 7 8 9 10 C14 11 12 13 14 15 16 17 18 8 6 4 2 19 7 7 Y5 Y6 1 Y4 8 5 Y3 2 3 Y2 Y1 PSELCON VMUTE D4_FSEL UV7 Y0 RB110 47 5 6 5 8 7 UV6 UV5 C BOOST5V A_GND 1 1 RB109 47 6 8 7 4 3 UV4 UV3 5 UV2 UV1 UV0 1 R1122 1M;1/16J TO PWA B 3 6 1 2 XIN C1122 7P;CH 4 2 RB106 47 R1014 100;1/16J L1003 BLM15BB100SN1 RB107 47 VPIXCLK USBD+ VBDET USBD7P;CH 1K;1/16D VDD3 3 4 R1121 VDD3 XIN XOUT TO IC153 YOUT UOUT VOUT XOUT VDD1.2 VDD1.8 C1121 48.000MHz 2 1 E D 1AV4V10B8820G X1102 CMOS1.8V VDD1.2 R1090 0.1;B C1006 ZPI_AD FPI_AD LENS_TEMP HALL_OUT FPIOUT AUDPDN ZPIOUT AUDSD AUDCK DACDAT AUDEN ZBOOT_COMREQ ADCDAT LRCLK D CMOS1.8V 0.1;B C1010 R1041 2.4K;1/16J VDD3 R1008 10K;1/16J R1025 0;1/16Z BCLK AMCLK SLVSD0N SLVSD0P SLVSD1N SLVSD1P SLVSCN SLVSCP SLVSD2N SLVSD2P SLVSD3N SLVSD3P ADCK L1005 BLM15BA330SN1 WLANON RESET_N GPI3 GPI2 GPI1 GPI0 VDD3 SHUTTER BLON TO CAA FLASH R1032 10K;1/16J PAON1 E R1020 100;1/16J VDD1.8 PAON2 WLANON2 BOOST5V R1027 100;1/16J VDD1.8 R1028 4.7K;1/16J TO TCA A_I2CSCLK TO CAA VDD3 A_I2CSDATA BOOST5V R1015 4.7K;1/16J VDD1.8 GPI3 R1056 VDD3 GPI2 44.2;1/16D HALL_OUT GPI1 C F GPIOE17 V1 GPIOE16 U1 GPIOE15 T1 GPIOE14 R1 GPIOE13 P1 GPIOE12 N1 GPIOE11 M1 GPIOE10 P2 GPIOE9 P3 GPIOE8 R6 GPIOE7 N3 GPIOE6 P6 GPIOE5 N2 GPIOE4 N5 GPIOE3 N6 GPIOE2 N7 GPIOE1 M2 GPIOE0 M5 LCDCK M3 DP L3 REXT GPIOD0 M6 DM SDIN0 L2 VBUS SDIP0 L6 XI SDIN1 K2 XO SDIP1 L5 COMPV SCKIN K1 VREFV SCKIP K3 IREFV SDIN2 K6 YOUT SDIP2 J1 UOUT SDIN3 J6 VOUT SDIP3 J2 COMPAO CKIN J3 VREFAO ADCK H1 AOUT GPIOF46 J5 VREFAI GPIOF45 H2 AIN0 GPIOF44 H6 AIN1 GPIOF43 G2 AIN2 GPIOF42 H5 AIN3 GPIOF41 G1 AIN4 GPIOF40 H3 AIN5 GPIOF39 F2 AIN6 GPIOF38 F1 AIN7 GPIOF37 E2 GPIOD11 GPIOF36 G3 GPIOD10 GPIOF35 E1 GPIOD9 GPIOF34 D2 GPIOD8 GPIOF33 G6 GPIOD7 GPIOF32 D1 GPIOD6 GPIOF31 F3 GPIOD5 GPIOF30 F5 GPIOD4 GPIOF29 E5 GPIOD3 GPIOF28 E3 GPIOD2 GPIOF27 D3 GPIOD1 GPIOF26 VSS GPIOF25 GPI0 GPIOF24 AE25 STATE1 STATE2 GPIOF23 ZPIOUT FLASH GPIOF22 RESET_N AD25 VSS 0;1/16Z F AC25 VSS FPIOUT GPIOF21 SHUTTER GPIOF20 CMOS1.8V GPIOF19 CMOS1.8V AE24 VSS LENS_EN VAA2.8 GPIOF18 VAA2.8 AD24 VSS GPIOF17 VDD3 GPIOF16 VDD3 LENS_SCLK GPIOF15 LENS_RESETN GPIOF14 ZPI_AD ADCK GPIOF13 SLVSD0N G AC24 VSS GPIOF12 FPI_AD C24 VSS GPIOF11 SLVSD0P A24 VSS B24 VSS GPIOF10 PS GPIOF9 SLVSD1N AE23 VSS GPIOF8 LENS_SDI GPIOF7 LENS_SDO GPIOF6 SLVSCN SLVSD1P AD23 VSS GPIOF5 CLK24M GPIOF4 SLVSCP GPIOF3 G H DSA12 DA12 L19 DSBA0 DBA0 L21 ZDSWE ZDWE M19 ZCAS ZCAS M21 ZRAS ZRAS M23 DSBA1 DBA1 M24 ZDSCS ZDCS M25 DSA0 DA0 M20 DSA2 DA2 P20 DSA3 DA3 N24 DQ15 DQ15 N25 DQ14 DQ14 R19 DQ13 DQ13 P21 DQ12 DQ12 P23 DQM1 DQM1 P24 DQS1 DQS1 P25 DQ11 DQ11 R20 DQ10 R21 DQ8 DQ8 R23 DQ7 DQ7 R24 DQ6 DQ6 T21 DQ5 DQ5 R25 DQ4 DQ4 T23 DQM0 DQM0 T24 DQS0 DQS0 T25 DQ3 DQ3 U23 DQ2 DQ2 U24 DQ0 DQ0 V23 ASIC_SDO SDO U25 ASIC_SDI SDI V24 ZSREQ FSEL VSS GPIOE25 AD21 GPIOE24 AA19 GPIOE19 GPIOE20 GPIOE18 GPIOE17 GPIOE16 GPIOE15 GPIOE14 GPIOE13 GPIOE12 GPIOE11 GPIOE10 GPIOE9 GPIOE8 GPIOE7 GPIOE6 GPIOE5 GPIOE4 GPIOE3 GPIOE2 GPIOE1 GPIOE0 3 LCDD5 6 5 LCDD4 2 1 LCDD3 6 5 LCDD2 8 7 RB104 150 2 1 RB103 150 LCDD0 CB183 1;B E4 D6 B5 SPN MCKI D4 C1 RIN1/DMCLK AT MD D1 LIN1/D P /DM WR MP C2 A1 4 BICK AUDIO CODEC IC182 AK4649ECB QAK4649ECB-LJ D2 LIN2 2 VSS2 A6 R1801 10;1/16J DVDD A5 E1 RIN2 AA_GND 6 5 VOUT 4 NP GND VIN GND VCOUNT 1 2 3 IC181 TK70630HCL-G QTK70630HC-GG 3 4 1 2 2.2K RB182 C5 LRCK B6 1 RB184 100K 3 SDTO D5 SDTI B1 A2 B3 C4 R1352 10K;1/16J G 4 BCLK LRCLK ADCDAT USB_VBUS TO PWA ZAVJACK USBD- ! L1301 EXC24CF900 DACDAT C6 AUDSD CDTIO/CAD0 A4 CC LK /SC L B4 B2 2 VDD3 AUDCK USBD+ 1 F5007 1A32V 1608 R1301 0;1/16Z 2 Y_OUT Pr_OUT AUDIO_LOUT 2 3 4 5 6 7 L1303 BK1005HM102 AUDIO_ROUT 1 L1006 FBMH1608HL300 R1302 0;1/16Z R1303 0;1/16Z R1304 0;1/16Z Pb_OUT AUDEN 8 9 L1304 BK1005HM102 10 AUDPDN TO USB & AV CN110 AV_JACK USB_VBUS USB_DUSB_D+ Pb_OUT Y_OUT Pr_OUT LINE_L GND LINE_R Z1 Z2 Z3 F Z4 AA_GND E 0.1;B C1818 3 RB102 0 4 3 1 8 7 7 2 1 5 3 E5 E3 LOUT MICL 4 2 8 6 4 2 1 RB110 47 5 6 8 7 5 4 3 7 RB109 47 6 8 4 3 4 3 1 E6 E2 MIN 1 AA_GND 6 2 AA_GND R1802 0;1/16Z 5 1 200 RB183 C3 D3 ROUT AA_GND RB106 47 2 2 1 L1003 BLM15BB100SN1 1 2 3 AMCLK TO MIC(L) LCDD1 JW181 AWG32/AWG30 MIC(L) 1 1 VDD3 RB107 47 XIN XOUT 4 R1014 100;1/16J 44.2;1/16D R1090 0.1;B C1010 R1041 2.4K;1/16J 0.1;B C1006 E R1008 10K;1/16J 0;1/16Z GPIOE22 Y18 GPIOE21 AE21 AC5 AE4 AD4 AE5 AD5 AD6 AE8 AE6 AD7 AC6 AE7 AD8 AD9 AE9 AE10 AE11 AD10 W10 AD11 AE12 AE13 AD12 AE15 AE14 AE16 AD13 Y14 AD14 W14 AD15 Y15 AE17 W15 AD16 Y16 AE18 AA17 AD17 W16 AE19 AD18 AD19 Y17 AE20 AA18 AD20 W17 VDD3 R1025 LCDCK DP REXT DM VBUS XI XO COMPV VREFV IREFV YOUT UOUT VOUT COMPAO VREFAO AOUT VREFAI AIN0 AIN1 AIN2 AIN3 AIN4 AIN5 Y6 AIN6 AC4 AIN7 GPIOD10 Y5 GPIOD11 GPIOD9 AA3 AB2 AB3 GPIOD8 GPIOD7 GPIOD4 Y3 GPIOD6 GPIOD3 W5 GPIOD5 GPIOD2 AA2 AB1 F VDD3 Y2 GPIOD1 GPIOD0 AA1 R1027 100;1/16J SDIN0 GPIOE23 AE22 LCDD6 3 2 C1304 1;B GPIOE26 AC20 JW182 AWG32/AWG30 A_GND LCDD7 7 CB182 1;B 2 8 AUDIO_LOUT 1 4 4 3 3 1 4 AUDIO_ROUT 3 100;1/16D GPIOE27 AC21 LMCLK L1007 BK1005LL241 MICR 1 /S GPIOE28 Y19 R1053 JW183 AWG32/AWG30 MIC(R) CSN GPIOE29 AD22 TO MIC(R) C1812 4.7;B 1608 R1815 10K;1/16J A_HDMI_INT SPP RXD1 GPIOB0 AA20 Q1301 DTC144EM ZUSBDET MCKO GPIOB1 AC22 AA_GND DA GPIOB2 AA21 AA_GND PDN G W_SD_RESET VBDET VCOC TXD1 GPIOB3 Y20 1 AVDD GPIOB4 Y21 MRST HOTLINE R1814 10K;1/16J C1001 1000P;B JW184 AWG32/AWG30 A_GND C1801 0.1;B ZRST AB24 H VDD3 VDD3 A_D4CKOUT I2C D4CKIN AB25 CLK24M SVDD R1256 100;1/16J R1023 220;1/16J MCLK W20 D4CKO AB23 1 WHITE VSS3 CLKSEL0 AA25 SP- VSS1 CLKSEL1 W21 0;1/16Z R1029 PSELCLK AA24 JW185 AWG32/AWG30 SP- RED VDD3 C1018 0.01;B CLKIN VDD R1024 220;1/16J 3 2 1 JW186 AWG32/AWG30 SP+ 6 5 4 PLLEN PSELTST V20 OE CLKOUT 1 Q1302 UP0431300 4 5 6 VCOM 8 R1021 10K;1/16J C1810 2.2;B 4 PLLEN AA23 VDD3 SP+ C1804 0.1;B C1805 0.1;B C1802 4.7;B C1811 4700P;B H D4_FSEL R1019 0;1/16Z TSCKIN Y25 QAK8113L----G AK8113 IC111 HiON 3.0V REG 6 7 2 3 RB111 10K 5 1 TCLKI0 Y24 CLOCK GEN VDD3 TEST0 V21 4 TEST1 U20 TO SPEAKER ASIC_SCK SCK V25 ZSREQ W24 TCLKI1 W25 I DQ1 DQ1 U21 2 I J DQ9 DQ9 T20 RB181 20K J DQ10 3 TEM ASIC K DSA1 DA1 N21 1 K CP1 BOARD (DMA) MAIN [LOWER-RIGHT] DSA10 DA10 P19 C1017 1;B V3XA A------N LCDVD LCDHD Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 PSELCON VMUTE D4_FSEL UV7 UV6 UV5 UV4 UV3 UV2 UV1 UV0 VPIXCLK USBD+ USBD- VBDET TO IC153 YOUT UOUT VOUT ZPI_AD FPI_AD LENS_TEMP HALL_OUT FPIOUT AUDPDN 1 SDCLK C1121 SDDAT2 7P;CH SDDAT1 5 6 7 VOUT UOUT C1507 1;B TO IC101 C1509 1;B 17 Pb-in 19 Py-in 20 VDD 11 12 75;1/16D R1537 13 VDD3 14 15 16 17 VCC_C IC153 AN13208A QAN13208A---P Pb-out VCC_Y Z1 Z2 Z3 Z4 VIDEO DRIVER 1608 C1511 4.7;B L1502 10;M standby SW 18 1608 B 16 Filter SW2 C1506 1;B 9 10 SDDET 15 14 13 12 11 Filter SW1 YOUT Pr-in C1510 10;B VDD3 1608 C 1608 L1501 10;M Y_OUT Pb_OUT Pr_OUT VMUTE 8 SDWP ZCARD R1529 75;1/16D FILTERSEL R1534 75;1/16D R1122 1M;1/16J Pr-out C1122 7P;CH 4 SDDAT0 GND_C 3 4 3 SDDAT3 1K;1/16D 48.000MHz 2 1 2 SDCMD 1AV4V10B8820G X1102 R1121 XOUT D XIN Py-out 10 18 C1514 4.7;B 1608 9 8 7 6 BACKUP_BAT TO SYA C1515 4.7;B 1608 19 20 TO TB1 CN142 CN101 GND SDCLK GND SDCMD SDDAT3 SDDAT2 SDDAT1 SDDAT0 SDWP GND GND ZCARD SDDET VDD3 VDD3 GND GND GND BACKUP_BAT GND Z1 D C Z2 B C1512 2.2;B R1516 75;1/16D R1517 91;1/16D R1519 91;1/16D 1 2 3 4 5 C1513 4.7;B 1608 ZPIOUT AUDSD AUDCK DACDAT AUDEN ZBOOT_COMREQ ADCDAT LRCLK BCLK SLVSD0N AMCLK AA_GND A A 1 2 3 4 5 6 7 8 9 10 C15 11 12 13 14 15 16 17 18 19 CP1 BOARD (DMB) HDMI DMB IC191 TDA9989BET QXXAGB057---P UV4 UV3 UV2 UV1 UV0 Y0 Y1 D Y2 Y3 Y4 Y5 Y6 Y7 AP1 VDDD(OSC_CEC) OSC_OUT OSC_IN INT_HDMI HPD CEC DSDA DSCL VDDA(PLL_SRL) G6 H6 B6 E6 H7 F6 F7 C6 R1925 0;1/16Z 0;1/16Z 4 8 7 3 NC H1 2 11 13 15 D6 ! VDD5 R1922 10K;1/16D TO PWA A_HDMI_INT R1911 4.7K;1/16J VDD3 F5006 1A32V 16 17 2 R1937 3.3K;1/16J D1901 RB520S-30FJ 1 18 1608 R1935 1.8K;1/16J R1936 1.8K;1/16J DACDAT R1934 27K;1/16J 19 Z1 Z3 Z4 HDMI CONNECTOR TO DMA G VDD3 F HDMI_HPD C1905 12P;CH 2 UV6 UV5 E Q1902 UP0431300 UV4 UV3 UV2 UV1 VDD3 UV0 6 5 4 1 2 3 Y0 Y1 Y2 D Y3 Y4 Y5 Y6 Y7 C C BCLK BCLK LRCLK LRCLK B Z2 H 3 X1901 14 JTAG B7 EXT_SWING E7 12 C1906 0.1;B R1917 0;1/16Z R1916 R1914 100;1/16J LRCLK 9 10 I R1920 22K;1/16J UV5 8 C1911 0.1;B AP0 E5 G8 VPIXCLK UV7 7 L1902 DLP2ADN900HL4 C1910 0.01;B ACLK F5 100;1/16J VSYNC/VREF G5 HSYNC/HREF H5 1 E C7 F4 R1915 UV6 E8 TxC- C1904 12P;CH UV7 Tx0VDDA(TMDS)(1V8) G1 BCLK 1;B C1903 F D8 TxC+ F8 G VPIXCLK Tx0+ G2 G4 6 NC A1 HDMI TRANSMITTER H4 5 C8 1 B8 Tx1- F 4 4 Tx1+ C3 RE 3 8 C2 /F DE 2 5 3 A8 CN191 TMDS SHLD2 TMDS DATA2+ TMDS DATA2TMDS SHLD1 TMDS DATA1+ TMDS DATA1TMDS SHLD0 TMDS DATA0+ TMDS DATA0TMDS CLK SHD TMDS CLK+ TMDS CLKDDC/CEC GND CEC DDC SCL DDC SDA RESERVED DDC+5V HOTPLUG DET 1 L1901 DLP2ADN900HL4 7 VDDA(TMDS)(1V8) F2 TO SYA R1924 D3 G3 HDMI_HPD VSSD A7 F3 C1908 0.1;B H8 TX2- F1 HDMI_HPD G7 D2 H2 C1902 1;B H B5 TX2+ A6 H3 TO DMA A5 VSSA D7 D5 VDDDC0(1V2) A_HDMI_INT C5 2 UV7 D4 6 UV6 C1 1 A_I2CSCLK B1 R1921 0;1/16Z A_HDMI_INT UV5 B2 12.000MHz A_I2CSCLK A_I2CSDATA A2 C1909 1;B UV4 B3 5 D1 A3 VSSA UV3 B4 6 R1918 100;1/16J R1919 I E1 A4 VCLK E2 UV2 E4 J C1907 1;B 100;1/16J UV1 C4 VSSD E3 VDDD0(IO)(1V8) C1901 1;B R1904 0;1/16Z 100;1/16J Y0 VPIXCLK Y1 Y3 Y2 Y4 Y5 Y6 Y7 UV0 J A_I2CSCLK A_I2CSDATA TO DMA D2-17300/SG314-J A_I2CSDATA K VDD1.8 CSDA VD DA (SH CSCL R)( VD 1V DA (SH 8) R)( 1V8 ) K DACDAT DACDAT B TO DMA A A 1 2 3 4 5 6 7 8 9 10 C16 11 12 13 14 15 16 17 18 19 CP1 BOARD (TCA) LENS K F_SENSE ZPIOUT TCA J C9517 1000P;B R9515 F1-17300/SG314-J 220K;1/16D K J 0.1;B C9505 0.1;B G8 F8 MONB DVDD25 TEST1 TEST2 TEST3 ADVRL ADVDD PI1 VOUT1 DAVSS DAVDD OPVSS VINM2 E8 D8 C8 B8 G4 SAD R9520 0;1/16Z R9517 1K;1/16D G3 PI2 F3 TEST0 R9529 0;1/16Z VM3 J5 OUT5A J6 NC PS VM4 OUT7A RNF OUT7B SENS OUT1A NC OUT1B PGND1 VM1 OUT2A VINP2 PGND2 OUT2B NC OUT6A OUT6B R9519 0;1/16Z A1 A2 A3 A4 A5 A6 A7 A8 A9 B9 C9 D9 E9 F9 G9 H9 J9 J8 J7 0;1/16Z 14 13 12 R9501 11 10 ZOOM_B+ HALL_IN- 9 8 7 HALL_OUT- PILED OUT5B J4 F4 SHUTTER 15 R9502 22;1/6F 6 5 FOCUS_A- ADVRH J3 E4 MONA 4 FOCUS_B+ 3 FOCUS_A+ 2 FOCUS_B- C9504 0.1;B 1 F 4.7K;1/16D DRIVE- FOCUS_B- DRIVE+ HALL_OUT+ R9510 0.1;B FOCUS_B+ FOCUS_A- R9514 0;1/16Z PS CLK24M CLK24M LENS_RESETN LENS_RESETN LENS_SCLK LENS_SCLK LENS_EN LENS_EN C LENS_SDO LENS_SDO LENS_SDI LENS_SDI STATE1 STATE1 STATE2 STATE2 SHUTTER+ SHUTTER+ FPIOUT FPIOUT ZPIOUT ZPIOUT LENS_TEMP LENS_TEMP B G D HALL_OUT PS H E PS FOCUS_A+ C9502 C9523 0.22;B D I R9526 470;1/16D E C HALL_OUT+ NC J1 D6 ZRESET SHUTTER+ ZOOM_B- ADVSS J2 D5 VREF LENS_RESETN F OUT4A H1 D4 MDI 4 220 HALL_IN+ OUT4B G1 D3 COMPD1 LENS_SDI 16 27;1/6F ZOOM_A+ PGND4 F1 E3 DVSS FPIOUT DRIVE+ OUT3A E1 LENS DRIVER IRIS CONTROL DRIVE- ZOOM_A- 17 RB951 2 3 R9505 2125 C9508 2.2;B R9513 0;1/16Z Z_SENSE ZPI_AD VM2 D1 IC951 LC898200A-H QXXGA0500131P G5 HIN 18 PILED Z_SENSE OUT3B C1 19 1 LENS_SDO PGND3 B1 G6 HGND1 20 LENS_EN MDO B3 G7 HB1 HALL_IN- R9516 220K;1/16D C9520 1000P;B HALL_IN+ 21 ZOOM_A+ DGND B2 F7 OPVDD 22 0;1/16Z ZOOM_B- 0.1;B MCSB B4 E7 VOUT2 C9519 680P;B STATE1 C9515 DVDD33 B5 D7 VINP3 23 R9506 ZOOM_B+ ST1 B6 C6 CLK C7 COMPA2 R9523 0;1/16Z FPI_AD DVSS B7 C5 ST2 CLK24M HALL_OUT- 24 F_SENSE 2 H8 Z2 THERMISTORTHERMISTOR+ FOCUS_PI_AC FOCUS_PI_K N.C FOCUS_PI_E GND ZOOM_AZOOM_B+ ZOOM_A+ ZOOM_BN.C ZOOM_PI_K ZOOM_PI_E ZOOM_PI_AC DRIVEDRIVE+ GND HALL_IN+ HALL_OUT+ HALL_INHALL_OUTGND FOCUS_AFOCUS_B+ FOCUS_A+ FOCUS_BTO LENS C9511 680P;B H7 4 H6 1 H5 RB952 39K H4 3 H3 C9512 680P;B H2 25 C9513 0.1;B G2 VCC F2 COMPA1 E2 VINM3 D2 VOUT3 C2 C4 MCLK STATE2 H C3 26 ZOOM_A- LENS_SCLK G Z1 27 LENS_TEMP TO SYA R9511 4.7K;1/16D CN951 R9504 47K;1/16D CE 1 2 VLIM PON VSS COMPD2 C9524 1;B TO DMA VOUT Z1 VDD1.8 VDD1.8 VIN VDD3 C9510 1000P;B 4 3 VDD3 1608 VDD3 1608 I XC6221S04XG QXC6221S04XGP C9516 1;B VDD3 C9518 0.1;B R9507 10;1/16J 3.3V REG IC952 C9506 BOOST5V B FPI_AD FPI_AD ZPI_AD ZPI_AD TO DMA A A 1 2 3 4 5 6 7 8 9 10 C17 11 12 13 14 15 16 17 18 19 CP1 BOARD (SYA) SYSTEM CONTROL K SYA K BOOST5V BOOST5V UNREGSY SW3.2V BOOST5V TO DMA UNREGSY TO PWA SW3.2V Y1-17300/SG314-J ZBOOT_COMREQ VOLTAGE: VIEW MODE, LCD ON ZSREQ R3005 J 10K;1/16D TO DMA TO PWA BAT_TEMP WIFI_TEMP SW3.2ON 4 5 6 3 2 1 3.2 TO PWA DC_IN UP0431300 Q3003 I I 6 5 6 8 7 R3019 10K;1/16J 4 5 RB304 47K 1 CLK SO2 4 RDSEL SO1 HINGE 6 DATA0 SO0 2 330 RB306 3 5 7 4 3 7 R3003 1K;1/16J 8 PON2 G6 B6 ZBOOT_COMREQ MRST H6 A6 XCIN G5 C5 XCOUT IC301 LC87F2924BUFL64TBM-E QXXGA0500081P 32 31 24 25 23 22 C4 BATTERY SCAN_IN0 G4 BAT_URX G3 A4 XIN B4 XOUT 8bit MICRO-PROCESSOR A3 VDD1 D2 5 C1 6 D3 7 10 F1 11 E3 12 F2 13 ZUSBDET SCAN_IN1 SCAN_IN2 SCAN_IN3 E2 9 SCAN_IN4 E1 D1 8 E4 14 H1 15 G1 HDMI_HPD C2 4 VSS2 C3 3 VDD2 B2 2 H2 MRST R3026 1K;1/16J RED_LED USB_ON KEY_2ND R3015 1K;1/16J TO PWA F SI0 TXRX R3004 330K;1/16J AL3.2V TIMEOUT ZCHGDONE TO PWA TO DMA HDMI_HPD TO DMB 16 E ZUSBDET ST_CHG ZCARD ZBACKUPCTL SI1 G TO DMA PANEL_OPEN 1K RB307 SI0 TO PWA 3.2 ASIC_SCK ST_CHG_ON A2 ASIC_SDO RED_LED TIMEOUT ZCHG_DONE G2 GREEN_LED BAT_UTX F3 A1 ASIC_SDI HOTLINE D4 INT_TEMP CHG_CNT B3 ZCARD ZBACKUPCTL NC SW3.2ON 19 PANEL_OPEN H3 21 H5 USB_ON H4 KEY_2ND F4 20 A5 VSS1 PON2 28 SW3.2ON F5 B5 ZRESET TO DMA TO PWA,TCA NAND_RESET PON 30 E5 29 ERR PLLEN H7 PON H8 27 G8 26 G7 NAND_RESET HINGE F6 VSS3 SCAN_OUT2 F7 GREEN_LED TO TB4 CN621 H 33 E7 VDD3 SCAN_OUT1 34 F8 RDSEL SCAN_OUT0 37 36 35 E6 CLK(SFW) ZOOM_AD 38 E8 DC_IN WIFI_TEMP BAT_TMP 40 39 D8 18 TH301 NCP15WF104F03-RC Z1 41 D7 B1 17 42 C8 C6 1 16 43 D6 DATA0(SFW)) 50 51 52 53 54 56 R3013 22K;1/16D 15 44 C7 61 14 3 2 13 4 12 CB303 0.1;B RB311 150K 1 11 45 D5 62 60 59 3.2 BAT_OFF B7 ZSREQ 46 A8 63 10 330K;1/16J R3011 4 9 C3012 22P;CH 8 58 57 X3002 7 B8 64 SW3.2V 55 C3006 1;B 1AV4V10B8550G 32.768KHz A7 47 ZAVJACK 49 2 CB303 0.1;B 1 4 5 6 R3012 220;1/16J 1 ZOOM_SW_AD KEY_1ST RB307 1K 2 H=0.95 RESET 2125 C3001 10;B 6.3 BATTERY BACKUP 8 7 6 5 BACKUP ALWAYS VIN NC GND IC302 NJU7286ARB1 QNJU7286ARB1G 1 2 3 4 48 RESET 5 6 4 3 BOOST5V 3 BAT_OFF TO DMA 3 2 1 4 2 17 Z2 3 TO PWA TO DMA ERR 3.2 1 R3009 1K;1/16J E 2 TO DMA ZAVJACK PLLEN RB312 100K 22P;CH C3015 F R3014 750;1/16J 1 3.3V DET Q3005 UP04213 CN301 GND RED_LED GREEN_LED BOOST5V ZOOM_AD SW3.2V SCAN OUT1 SCAN OUT0 SCAN IN4 SCAN IN3 SCAN IN2 SCAN IN1 SCAN IN0 GND 1ST 2ND GND 2.8V DET 2.4V DET R3001 330;1/16J BACKUP_BAT G 3.2V REG 1 2 4 3 CB302 1;B 5 1 3 2 1 R3002 1K;1/16J 4 Q3001 UP0KG8D00L H BACKUP3.2V RESET 3.2 8 2 AL3.2V 3.2 ZBACKUPCTL 3 AL3.2V AL3.2V J TO DMA 3 5 1 D 2 4 8 KEY_2ND 6 SI4 D 1K RB305 C3005 1;B SI3 7 SI2 SI1 SI2 SO1 SI3 ZOOM_SW_AD SI4 HINGE TO DMA GREEN_LED HINGE RED_LED KEY_1ST SO0 PANEL_OPEN CN302 ASIC_SDO 3 ASIC_SDI 1 SCAN IN SCAN OUT 1 0 3 2 4 0 UP DOWN LEFT RIGHT SET 1 -- VREC PLAY MENU POWER 2 PW_TEST -- TEST -- -- RB303 100K 2 3 4 5 6 7 8 BATTERY REMAINING GAUGE 4 1;B CB301 3 1 2 3 4 VIN VAA CELL BAUD1 BAUD0 GND GND TXRX 8 7 6 5 C AL3.2V IC305 MAX17022ETA+T QMAX17022ETAP 4.7K;1/16J R3010 B 2 AL3.2V TO DMA CB301 1;B 6 TXRX 5 RDSEL 4 Z1 TO TB3 CN611 B TO DMA TO PWA 1 Z2 2 CLK C CHG_CNT ASIC_SCK DATA0 GND POWER COM1 PANEL_OPEN GND AL3.2V HOTLINE 1 Z1 BAT+SY A TO PWA A 1 2 3 4 5 6 7 8 9 10 C18 11 12 13 14 15 16 17 18 19 LCD CIRCUIT WAVEFORMS STROBE UNIT WAVEFORM T5401 T5402 TS-F35A-3 1 CN171 PIN 24 CP2 2V/div 20µs/div STROBE CHARGE IC541 BD4218NUV QBD4218NUV--P 10 9 8 7 6 C5435 33P;CH C5432 1;B 2125 22;B 6.3 C5401 3216 0.01;350B C5411 2125 R5402 100K;1/8JB-X PVC PGND VDD IGBT_OUT VC IGBT_IN VCC FULL START ADJ R5431 100;1/16J 1 2 3 4 5 Z1 7 8 3 4 1 2 5 6 3 4 5 6 7 8 5.6K;1/16J R5433 9 10 3.3K;1/16J R5434 11 12 13 14 15 C5434 1000P;B R5432 10K;1/16J C5433 1000P;B 290 300FW60ASAVF9.5X24.5 CEXAG697600AN C5412 60;300-E 16 17 18 19 20 R5425 47;1/16J I H TO CP1(DMA)CN105 G MA2SD19 D5404 R5424 10K;1/16J CN171 PIN 36 CP6 2V/div 20µs/div 2 RB541 1KX4 1/16W D5401 FPSN4 CP8 2V/div 20µs/div CN541 AL3.2V AL3.2V FLCTL ZCHGDONE CHG BOOST5V N.C. N.C. N.C. GND GND GND GND GND GND UNREGST UNREGST UNREGST UNREGST UNREGST 1 2 JW542 AWG30 1 XKT 2.0X1.25 BLACK PIN 34 G 1 C5431 1;B CN171 H J R5435 100;1/16J 5 TIG032TS-S-E Q5402 I 4 C5410 0.022;350B 3216 S1-17300/SG314-J 2 F 3 3 D5402 RE0208DA 220K;1/8JB-X 2125 R5422 TRG 290 VOLTAGE: STROBE AFTER CHARGE P JW541 AWG30 1 XAN 2.0X1.25 BROWN XAN XKT TTRN-0530H-018-T S J ST1 FLASH REFLECTOR CN171 PIN 14 DCLK 2V/div 20ns/div K 4 3 2 1 TEST POINT LOCATION ST1 BOARD STROBE 5 6 7 8 K IGBT_GND IGBT_GND F F WF-SG314-LCD TB1 BOARD SD CARD SOCKET TB1 Z4 Z3 Z2 Z1 3 6 7 8 9 10 11 SDDAT2 1 RB141 100 8 6 4 2 7 5 R1402 10;1/16J SDDAT3 3 4 5 6 SDDAT1 7 8 7 8 9 10 11 SDWP 18 19 ! Z1 C1408 4700P;B C1410 3P;CJ C1409 4700P;B 17 10P;CH C1402 16 10P;CH C1403 12 15 10P;CH C1404 VDD3 10P;CH C1405 14 3 6 SDDET 13 2 5 2 SDDAT0 CN141 DATA3 COMMAND VSS VDD CLOCK VSS DATA0 DATA1 DATA2 CARD COMMON WP 1 4 ZCARD 12 20 3 1 7 RB142 10K 8 6 4 C1401 4700P;B 5 Z2 Z3 S6501 ESE18L11BXK Z1 1 Z2 E JW653 AWG32 HINGE_SW1 2.0X1.25 TO VF1 JW171 D JW654 AWG32 HINGE_SW2 BLACK 2.0X1.25 TO VF1 JW172 1AV4S10B5501G HINGE SWITCH C Z4 B TO SD Q1403 UP0431300 1 2 3 1 RED R1401 100;1/16J SDCMD 4 10P;CH C1406 B TB2 T2-17300/SG314-J SDCLK 2 Z6301 C 1 ML614-TZ14-U2-C1 CN142 GND SDCLK GND SDCMD SDDATA3 SDDATA2 SDDATA1 SDDATA0 SDWP GND GND ZCARD SDDET VDD3 VDD3 GND GND GND BACKUP_BAT GND 5 1 RB143 10K 2 T1-17300/SG314-J D TB2 BOARD HINGE SWITCH VDD3 3 E 6 5 4 TUP0431300--G TO CP1(DMA)CN101 A A 1 2 3 4 5 6 7 8 9 10 C19 11 12 13 14 15 16 17 18 19 TB3 BOARD MR SENSOR K VF1 BOARD LCD CONNECTOR TB3 IC611 MRX1518HTA QMRX1518HTA-P CN611 Z2 2 1 2 OUT 1 VDD VSS 3 3 4 0.1;B C6101 AL3.2V GND PANEL_OPEN COM1 POWER GND I H GND VDD3 LCDD0 LCDD1 LCDD2 LCDD3 LCDD4 LCDD5 LCDD6 LCDD7 GND LMCLK GND HD VD LCDRESET LCDEN LCDCK LCDSD LCD_CA LCD_AN VDD3 HINGE GND GND GND GND GND GND GND MR SENSOR J S6110 SKRMAAE010 1AV4S10B6030G 5 6 Z1 POWER TO CP1(SYA)CN302 G TB4 BOARD KEY SWITCHES F VF1 CN172 T3-17300/SG314-J K Z1-17300/SG314-J 1 VDD3 2 LCDRESET LCDD0 3 4 5 6 7 8 9 10 LCDEN LCDD2 LCDCK LCDD3 LCDSD LCDD4 LCDD7 1 LCDD5 LCDD6 3 4 LCDD6 LCDD5 5 6 LCDD7 LCDD4 7 8 LCDD2 3 4 LCDD1 5 6 LCDHD LCDD0 7 8 LCDVD LMCLK LCDRESET LCDHD LCDEN LCDVD LMCLK 13 14 15 16 RB172 150 1 12 17 LCDCK 18 4 5 2 6 7 8 9 10 11 12 13 14 15 16 R1702 17 C1701 LCD_CA 20 RB171 150 3 2 2.2;1/16J LCDSD 19 2 0;1/16Z LCDD1 LCDD3 11 1 R1701 18 1;B 19 LCD_AN 21 20 22 21 R1703 23 22 100K;1/16J 24 23 C1702 25 1;B 26 C1703 27 2.2;B 28 29 30 Z6 Z5 Z4 Z3 Z2 Z1 24 25 1608 26 10 27 C1704 2.2;B 10 1608 C1705 2.2;B 10 1608 C1706 2.2;B 10 1608 C1712 1;B 6.3 D C Z2 2 1st 3 1 6 3 4 5 4 5 6 1 1 2 2 3 SHUTTER 7 4 5 8 6 9 S6202 10 12 13 14 15 16 17 LEFT 1 4 SET 2 5 DOWN 3 Z1 Z2 6 31 34 TO ZOOM SW UNIT CN622 BOOST5V RED_LED GREEN_LED GND SW3.2V ZOOM_AD Z1 SKRHAAE010 11 30 33 S6201 SKRNPBE010 2nd CN621 GND KEY_2nd KEY_1st GND SCANIN0 SCANIN1 SCANIN2 SCANIN3 SCANIN4 SCANOUT0 SCANOUT1 SW3.2V ZOOM_AD BOOST5V GREEN_LED RED_LED GND 29 32 TO CP1(DMA)CN103 E 28 1 1 Z2 JW171 AWG32/AWG30 HINGE SW1 TO TB2 JW653 RED JW172 AWG32/AWG30 HINGE SW2 TO TB2 JW654 BLACK C1707 0.22;B 16 1608 C1708 0.22;B 16 1608 C1709 1;B 16 1608 C1710 1;B 16 1608 35 36 37 38 39 CN171 GREST SHDB SCEN SCL SDA DIN7 DIN6 DIN5 DIN4 DIN3 DIN2 DIN1 DIN0 DCLK HD VD VCC GND DUMMY LED+ LEDFB PWM CP2 CP1 AVDD DUMMY AGND VCOMH VCOML PCD VCC1.8 DUMMY CP8 CP7 CP6 CP5 CP4 CP3 Z1 B S6203 SKRMAGE010 VREC S6204 SKRMAAE010 PLAY S6205 SKRMAAE010 MENU I H G F E Z2 TO LCD D UP RIGHT C Z1 TO CP1(SYA)CN301 J TB4 B T4-17300/SG314-J A A 1 2 3 4 5 6 7 8 9 10 C20 11 12 13 14 15 16 17 18 19 CL509 C5007 C5303 C5006 C5005 R5302 R5303 R5201 C5004 R5023 R5022 R5021 C5024 C5001 R5024 L5002 2A C5206 C5207 R5202 R5203 D5202 D5201 C5201 R1090 C1003 CL175 CL178 L1007 RB111 C1001 R1027 R1025 L1001 R9003 R5204 R5207 Q5203 R5205 L5003 IC501 CL506 F5 F5005 IC101 CN901 Q5003 D5204 RB103 C1122 R1121 C1121 C1501 CL184 CL189 CL185 CL186 CL188 CL187 R1815 CL514 CL309 C9002 C9006 R5208 R5206 CL521 C5071 CL520 R5043 R5046 Q5004 C5208 C5033 L5007 R5058 R5057 BAT_T CL510 R3010 CB301 IC121 VA101 C9014 R9004 R9007 RB101 IC904 CL103 CL101 CL107 CL104 CL108 CL106 CL102 R1005 R1032 1A C9013 R1904 C1902 CN101 C5061 IC504 R5010 Q5009 CL518 L5006 CN116 CL517 R5072 CL515 R5071 Q5008 C5072 R5056 C1207 R1001 R1018 F6 C9011 C9009 R1922 X1901 C1904 C1905 R1911 CL308 C5112 R9501 19 18 17 C5031 C1906 R5061 CL519 C5054 CL511 CL314 L1303 L1304 R1303 CL503 R1936 R1935 F5006 R1304 R1302 L1301 L1002 R1002 C1205 CL507 CL310 CL105 CL505 E R5062 R5063 16 15 14 13 12 11 C21 10 9 8 7 6 5 4 3 2 1 RB110 RB109 C5062 C9508 E R5210 R5209 X1102 C5113 R5111 C5111 F R9506 R9505 L5005 F RB107 RB106 CB302 C9004 C3001 Q5011 Q5202 R1014 L1003 R1122 C1504 TH301 R3013 R9010 IC902 R9006 C9008 C5037 R5045 R5065 R5070 C5022 R1053 C1002 C1502 Q5204 IC503 D5002 C5021 G Q5201 R5301 R1022 G R1916 R5211 C5008 R5304 IC521 C5205 C5204 D5003 C5202 C1204 C1901 C1903 D5203 L1005 R1020 IC191 R1919 H R1915 R1914 H BAT+ R1056 R1918 C5036 R1917 Q5007 IC305 I I C9012 R1008 R9008 R5044 Q5014 R1301 VA133 C9010 IC903 C5074 C5055 L1902 J BATC1301 C1302 C1910 C1911 R1937 L1901 CN110 CN191 K CP1 P.W.B. (SIDE A) K CN302 SG314/SG319_CP1 J0300AB SIDE-A J R5042 PRINTED WIRING BOARDS (P.W.B.) D D C C B B A A 6 CL258 CL522 R9529 CN951 E 7 8 JW181 9 JW183 WT BK GR YL JW186 10 C22 11 JW185 RD WT 12 IC301 RB304 RB306 13 C1909 R3003 C3003 IC302 14 C3002 R3001 RB302 15 Q3005 C3013 C3006 CN301 VA301 CL183 CL182 R1017 CL191 C1513 L1502 C9001 R1921 IC901 R9005 C1511 C1512 IC153 CL255 CL151 R1537 R1534 R1529 C1303 CL254 CL176 CL252 + F5001 2A F1 CL251 R5055 Q5013 C5304 Q1301 F7 CL502 R1934 Q1302 1A J0300AB SG314/ SG319_CP1 SIDE-B RB301 CL303 CL302 R3012 RB312 Q9002 CL305 R1028 Q9001 Q1902 CB303 R3019 R3009 R1015 CL257 C1509 R1516 R1519 C1507 CL152 C5301 L5301 D5301 C5302 C1057 C1047 CL259 CL256 CL253 CL512 CL952 R9013 R9015 R9014 R9016 Q3001 RB303 C9003 X3002 Q3003 CL313 R3007 R3004 R3005 CL306 CL311 CL150 CL961 CL960 C1010 C1063 R9009 L9001 C3015 R3025 R3011 C3012 C9015 R3026 R3015 RB305 C3005 IC905 CL333 RB307 CL331 C1016 R1098 C1206 C1058 C1064 C1007 VA131 R3002 C1801 R1801 C3004 R1814 C1053 R1041 C1811 C1812 CL181 IC111 R1102 C1013 C1006 C1510 CL304 RB182 CB183 CL338 R1029 R1011 C1012 R1026 RB184 CL953 R1024 RB104 CL958 CL501 CL962 CL956 CL951 C9501 CL957 CL959 C5032 R5031 CL501 CN105 C1008 CL335 C1804 C1810 IC182 C1802 IC181 C1805 C1817 C9515 R9518 R1023 R1016 CB182 RB183 C1818 RB951 RB952 C9511 1.6A F3 F5003 C1051 R1517 C1506 L1501 CL301 R1802 C9524 IC952 RB181 C9516 R9503 R9507 R1256 C1004 R1010 C1515 CL332 C9510 C9551 C9504 C5003 R9513 C1017 C1018 R1012 R1021 C1054 C1514 CL334 C9521 R9511 R9510 R9504 C9502 C1005 CL336 C9514 R9514 C9522 C9523 R9524 R9526 R9521 R9525 C9520 R9519 R9516 R9515 R5001 VR501 2A CL508 R5075 F2 2A CL516 C1201 C1066 CL307 R9520 VR501 C9505 JW182 5 IC951 C9507 C9509 JW184 R9523 R9502 C9513 C1203 C1048 C1304 C1908 RB105 VA134 R1925 4 R9522 C9519 C9518 C9503 RB102 C1065 3 R9517 2 C5010 C9517 1 F5004 C9506 C9512 CL954 F F4 F5002 CL955 G C5009 C1209 C1208 R1019 R5049 C1775 C1774 C1052 H R5032 C5073 R5074 R5077 R5076 CN103 F5007 R1924 C1907 R5059 D1901 I L1004 J L1006 R1920 K CP1 P.W.B. (SIDE B) K R1352 JK501 L5001 J D5007 VA302 I H VA304 VA303 G R3014 F RB311 E D D C C B B A A 16 17 18 19 CA1 P.W.B. (SIDE A) K TB3 P.W.B. (SIDE A) CA1 P.W.B. (SIDE B) IC611 C9107 C9112 C9116 VA911 R9103 18 C9115 R9106 31 J C9119 C9118 C9120 IC911 C9121 C9122 C9123 C9126 C9125 R9107 L9104 C9105 C9102 H CN611 C9128 C9111 C9127 L9102 L9101 C9103 C9109 C9104 L9103 H C9108 C9106 6 1 C9114 43 R9101 7 C9113 42 I C9101 C9124 C9110 I R9104 J R9105 19 30 K C6101 R9102 C9117 TB3 P.W.B. (SIDE B) G SG314/SG319_TB3 J0400DA SIDE-A F CN911 E SIDE-B SG314/SG319_TB3 J0400DA G D F E D S6110 C C B B A A 1 2 3 4 5 6 7 8 9 10 C23 11 12 13 14 15 16 17 18 19 TB1 P.W.B. (SIDE A) TB2 P.W.B. (SIDE B) BK J C1404 H S6501 I H Z6301 CN141 C1408 C1406 C1405 SIDE A C1410 C1402 G C1401 F R1401 RB143 RB141 F R1402 Q1403 C1409 G K J SIDE-B I S-A C1403 SG314 SG319_TB1 J0400CA SIDE B SG314/SG319-TB2 J0300BB RD K TB2 P.W.B. (SIDE A) TB1 P.W.B. (SIDE B) CN142 RB142 SG314/SG319_TB1 E E D D C C B B A A 1 2 3 4 5 6 7 8 9 10 C24 11 12 13 14 15 16 17 18 19 IC541 T5401 CL552 C5410 CN172 D5402 CL545 JW541 J0400AA SG314/SG319_ST1 JW542 C1707 C1712 C1709 CN171 C1705 C1710 C1703 SG314/ SG319_VF1 G F RD SIDE-A JW171 CL548 C1706 + C1704 CL556 JW172 H C5412 R5422 - BK CL557 CL558 C1708 F SG314/SG319_VF1 SIDE-B J0400BA G CL554 C1702 H I BN R1702 D5401 CL551 C5401 R5402 CN541 C5411 CL553 Q5402 BK C1711 CL549 CL555 CL559 C1701 R1703 R1701 J SG314/SG319-ST1 J0400AA SIDE-B RB172 RB171 CL561 C5434 R5432 D5404 I K CL560 R5425 R5424 C5435 C5431 R5431 CL562 SIDE-A J0400BA R5433 ST1 P.W.B. (SIDE B) RB541 C5432 R5435 J C5433 R5434 K ST1 P.W.B. (SIDE A) VF1 P.W.B. (SIDE B) T5402 VF1 P.W.B. (SIDE A) E E D D C C B B A A 1 2 3 4 5 6 7 8 9 10 C25 11 12 13 14 15 16 17 18 19 TB4 P.W.B. (SIDE A) K S6201 J TB4 P.W.B. (SIDE B) K S6203 J CN622 I S6204 I J0400EA SIDE-A SG314_TB4 SG319_TB4 H S6202 H S6205 SIDE-B G G CN621 F F E E D D C C B B A A 1 2 3 4 5 6 7 8 9 10 C26 11 12 13 14 15 16 17 18 19 Jan./’09 SANYO Electric Co., Ltd. Osaka, Japan
