Download 9 - Panasonic

3. Error Code List
The error code consists of 8 bits data and it shows the following information.
Attribute
LENS
Main item
Sub item
Lens drive OIS
Error code
High 4bits Low 4 bits
18*0
1000
2000
3000
4000
5000
6000
7000
Zoom
(C.B.)
0?10
0?20
0?30
0?40
0?50
0?60
Focus
0?01
0?02
Lens
18*1
0000
18*2
0000
Contents (Upper)
Check point (Lower)
PSD (X) error. Hall element (X axis) position detect
error in OIS unit.
OIS Unit
PSD (Y) error. Hall element (Y axis) position detect
error in OIS unit.
OIS Unit
GYRO (X) error. Gyro (IC7101) detect error on Main
P.C.B.
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
GYRO (Y) error. Gyro (IC7101) detect error on Main
P.C.B.
IC7101 (Gyro element) or IC6001 (VENUS ENGINE)
MREF error (Reference voltage error).
IC9101 (LENS drive) or IC6001 (VENUS ENGINE)
Drive voltage (X) error.
LENS Unit, LENS flex breaks, IC6001(VENUS
ENGINE) AD value error, etc.
Drive voltage (Y) error.
LENS Unit, LENS flex breaks, IC6001(VENUS
ENGINE) AD value error, etc.
Collapsible barrel Low detect error
(Collapsible barrel encoder always detects High.)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
Collapsible barrel High detect error
(Collapsible barrel encoder always detects Low.)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
Zoom motor sensor error.
Mechanical lock, FP9005-(6), (9) signal line or
IC6001 (VENUS ENGINE)
Zoom motor sensor error. (During monitor mode.)
Mechanical lock, FP9005-(6), (9) signal line or
IC6001 (VENUS ENGINE)
Zoom motor sensor error. (During monitor mode with
slow speed.)
Mechanical lock, FP9005-(6), (9) signal line or
IC6001 (VENUS ENGINE)
Phase error or operation failure of zoom Lens/motor/
encoder. (IMPACT)
Mechanical lock, zoom encoder.
HP High detect error
(Focus encoder always detects High, and not
becomes Low)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
HP Low detect error
(Focus encoder always detects Low, and not
becomes High)
Mechanical lock, FP9005-(11) signal line or IC6001
(VENUS ENGINE)
Power ON time out error.
Lens drive system
Power OFF time out error.
Lens drive system
21
Error Indication
Detecting
Part/Circuit
device
OIS X
LENSu NG
OIS Y
GYRO X
GYRO NG
GYRO Y
OIS REF
LENSSd/DSP
NG
OISX REF
LENSu/LENS
FPC
OISY REF
ZOOM L
ZOOMm/
LENSu
ZOOM H
ZOOM ENC
FOCUS L
LENS FPC/
DSP
FOCUS H
LENS DRV
LENSu