Download model 28 slim gem glass front merchandiser illustrated parts manual

MODEL 28 SLIM GEM
GLASS FRONT MERCHANDISER
ILLUSTRATED PARTS MANUAL
LO125, REV. A
AUTOMATED MERCHANDISING SYSTEMS INC
255 WEST BURR BLVD.
KEARNEYSVILLE, WV 25430
304-725-6921 - Fax 304-725-6983
[email protected]
www.amsvendors.com
INTERNATIONAL A.M.S. S DE RL DE CV
KM. 9 CARR. AL CASTILLO NO. 8200
MPIO. DE EL SALTO, JAL. MEXICO 45680
5233-3-6-88-07-17 - Fax 5233-3-6-88-13-14
www.amsint.com.mx
[email protected]
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
2
AMS Glass Front Merchandiser
Model 28-SLIM GEM
Illustrated Parts Manual
Table of Contents
SECTION
PAGE
INTRODUCTION
Table of Contents
General Introduction
Manual Organization
Merchandiser Identification
Patent Disclosure
Publication Notice
3
5
5
6
7
7
CABINET DOOR
8
HOPPER
12
CABINET
Base Plate
14
16
CONTROL BAY DOOR
18
RIGHT RAIL MOUNT
20
LEFT RAIL MOUNT/ LIGHTING
24
TRAYS AND PARTS
26
ELECTRICAL HARNESSES
28
HELIXES
40
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
3
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
4
GENERAL INTRODUCTION
The purpose of this manual is to give our customers a way of identifying major service parts for repair and replacement. The illustrations and parts list in
this manual are for identification only. Some optional parts are also shown.
Illustrations of these major parts are keyed with our part numbers. The illustrations help identify the general design, position and orientation of these
parts. The note section may also give important information.
Please refer to the section on merchandiser identification on the following pages. Without the model style and serial number it may be difficult to identify
the required part.
Parts should be ordered from your distributor.
It is our intent to assist our customers with up-to-date documentation. However, this manual may not show all parts, variations or changes. Some parts
may be shown out of scale. This manual is itself subject to change without notice. If any errors are found, please notify AMS so the correction can be
included in later revisions. Engineering data and third party information are generally not included. The graphical data, group assembly data, parts, part
assembly, parts breakout information and tabular data conveyed by this manual is proprietary and belongs to AMS, and holders without prior consent of
or without knowledge of and by AMS must surrender this data immediately.
All measurements are in inches except where specified as Metric.
MANUAL ORGANIZATION
This manual is divided into general sections. Each section is further divided into the various subsections or subassemblies. These lead off with one or
more illustrations showing the parts and each part is identified with a number. Note that some part numbers are for assemblies fabricated as a unit at
AMS and are replaceable only as a unit. Also, other part numbers identify optional parts which may or may not have been contracted for and factory
installed by AMS.
The part number in the illustration is listed with the description or title for that part. In some instances there may be multiple parts to choose from. The
correct service or repair part for the style of merchandiser must be selected. A quantities column in the list indicates quantities required.
There is a note section where additional information may be found.
This manual contains additional and new information for a vendor as currently manufactured. Older revisions of this manual should be kept with older
vendors.
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
5
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
6
MERCHANDISER IDENTIFICATION
When requesting service, replacement parts or technical assistance, please use the Model Number and the Serial Number with Date
Code, found on the Serial Plate (Refer to Figure 1) affixed to the merchandiser. The plate is usually located inside the window. The
information contained on this plate is necessary to determine what parts, kits, or maintenance apply to your vendor.
Figure 1. Example of Typical Serial Plate
Example of Model Number Breakdown
Example of Serial Number and Date Code Breakdown
AMS 28 – 6 24
1 - 0902 - 0275
Manufacturer
Cabinet Width
No. of Trays
No. of Selections
Example: AMS28-6-24 means this vendor is an Automated
Merchandising Systems merchandiser, 28” wide, with six (6) trays
making available four hundred eighteen (24) positions for different
products.
Built
Year
Month
Sequence
Example: 1-0902-0275 is translated as U.S. built (1),
manufactured in 2009, month of February, and was the 275th
manufactured that year.
Note: Manufactured in Mexico, Built = (2)
PATENT DISCLOSURE
This merchandiser and/or certain of its components are covered by one or more of the following U.S. and
international patents;
U.S. PATENTS: 6,041,962; 6,145,699; 6,202,888; 6,384,402; 6,520,373; 6,708,079; 6,794,634; 7,191,915;
7,246,719; 7,343,220 B2; 7,446,302.
CANADIAN PATENT 2,329,314.
MEXICO PATENT 230714.
PUBLICATION NOTICE
L0125, Revision A, ECN 2047, 03/2/09
It is our intent to assist our customers with up-to-date documentation: however, this manual may not contain all updates and is subject to
revision without notice. Please contact our Service Department with your requests or comments.
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
7
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
CABINET DOOR ILLUSTRATION
41
11
29
33
21
15
8
3
2
9
18
17
16
35
31
39
1
32
40
37
27
4
19
25
23
10
7
12
13
6
24 38 14
5 28 36
30
26 34
20
8
CABINET DOOR PARTS LIST
ITEM
1
PART NO.
20131
PART DESCRIPTION
LOCK, T-HANDLE CYLINDER
2
21318
DECAL, WIRNING, NO TIP OR ROCK
3
21325
4
23372
DECAL, WARNING, TRAY EXTENSION
TRIM, PLASTIC COIN CUP
5
6
23373
23688
7
23802
T HANDLE, CAM
DECAL, COMBINED WIRING DIAGRAM
8
23860
DOOR SKIN
9
10
23865
GLASS, SINGLE PANE
23867
ASSEMBLY, VERTICAL KICKER, RIGHT
11
23871
ASSEMBLY, DOOR FRAME
12
23873
ASSEMBLY, HOPPER
13
23875
BRACE, DOOR KICKER
14
23881
PANEL, COIN CUP MOUNTING
15
23946
ASSEMBLY, TOP HINGE
16
23963
STIFFENER, ESCUTCHEON
17
23979
RETAINER, GLASS, RIGHT SIDE
18
23980
RETAINER, GLASS, TOP
19
23981
RETAINER, GLASS, BOTTOM
20
23982
KICKER, RIGHT SIDE
21
24000
BRACKET, VERTICAL WINDOW STIFFENER
22
24001
BRACKET, TOP WINDOW STIFFENER
23
24004
BRACKET, BOTTOM WINDOW STIFFENER
24
24005
FALSE LEG
25
24028
ASSEMBLY, TRIM, HOPPER
26
24047
ASSEMBLY, DOOR HINGE, BOTTOM
NOTES
ASSEMBLY, PLASTIC COIN CUP
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
9
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
27
3000
SCREW, SHEET METAL TEK – 8-18
28
3001-03
SCREW, SHEET METAL, TYPE B, #8-18
29
3004-10
CARRIAGE BOLT, ¼ - 20 X 1 ¼ LG
30
3004-12
CARRIAGE BOLT, ¼ - 20 X 1 ½ LG
31
3005-04
CARRIAGE BOLT, #10-24
32
3006-10
#8-32 HEX NUT
33
3009-02
RIVET, STEEL, 1/8, BLACK
34
3023-15
WASHER, FLAT NYLON (1/2”)
35
REMOVED
36
3062
EDGE TRIM, SELF-LOCKING
37
3153-11
NUT, HEX W/ LOCK WASHER
38
3156-10
RIVET, ALIMINUM, 1/8”
39
3408
NUT, HEX JAM, ½-13 X 5/16 THK
40
3594
ASSEMBLY, T-HANDLE
41
3670-03
HOOK AND LOOP CLOSERS
42
3684
EDGE TRIM, SELF-LOCKING
General Note: Door skin decal (if equipped) is not shown in parts list.
10
THIS PAGE INTENTIONALLY LEFT BLANK
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
11
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
12
HOPPER PARTS ILLUSTRATION
3
1
4
8
16
10
17
9
2
7
6
13
11
14
15
12
5
HOPPER PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PART NO.
22120
22121
23486
23874
23877
23877-01
23878
23878-01
23913
23932
23933
23956
23956-01
3006-08
3009-02
3015
3113
PART DESCRIPTION
SENSOR BOARD, PRIMARY, SENSIT II
SENSOR BOARD, SECONDARY, SENSIT II
HOPPER FRAME
DEFLECTOR, HOPPER
ASSEMBLY, HOPPER RIGHT SIDE
ASSEMBLY, HOPPER LEFT SIDE
BRACKET, SENSOR COVER, RIGHT
BRACKET, SENSOR COVER, LEFT
VEND DOOR SHAFT
ASSEMBLY, HOPPER DOOR
ASSEMBLY, HOPPER BODY
HOPPER, BACK SIDE, LEFT
HOPPER, BACK SIDE, RIGHT
#8-32 HEX NUT
RIVET, STEEL, 1/8” BLACK
BEARING, NYLINER
TINNERMAN FASTENER, 3/16
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
NOTES
13
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
14
CABINET PARTS ILLUSTRATION
17
10
8
16
7
6
10
9
4
16
3
15
2
13
19
1
18
14
8
11
20
5
12
CABINET PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PART NO.
20608
3017-06
20321
23456
23853
23920
23926
23928
23944
23971
24021
24037
24045
24053
3000
3009-02
3009-04
3057
3080
3241-10
3270
PART DESCRIPTION
COVER, POWER CORD
WASHER, FLAT STEEL, SAE STD.
COVER, IEC INLET
RAIL MOUNT BACK, LARGE SUPPORT
ASSEMBLY, BASE
DOUBLER, TOP
WRAPPER, CABINET
WRAPPER BACK
SPACER, RAIL MOUNT
RAIL MOUNT, BACK
BRACKET BALLAST RESTAINT
PALLET, SHIPPING
SUPPORT, SMALL RAIL MOUNT, BACK
ASSEMBLY, STABILITY WEIGHT WELDMENT
SCREW, SHEET METAL TEK – 8-18
RIVET, STEEL, 1/8”, BLACK
RIVET, POP, STEEL, 1/8, BLACK
INLET, PANEL MOUNT, IEC
STRAIN RELIEF, BUTTON LOCK
SCREW, #6 DRYWALL
DECAL – MADE IN THE USA
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
NOTES
CANADIAN MODELS ONLY
CANADIAN MODELS ONLY
NOT SHOWN
AMS MODEL 28-SLIM MERCHANDISERS
15
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
BASE PLATE PARTS ILLUSTRATION
8
2
3
4
6
7
5
1
16
BASE PLATE PARTS LIST
ITEM
1
2
3
4
5
6
7
8
PART NO.
20121
23701
23855
23857
24009
24010
3007-06
3009-04
PART DESCRIPTION
LEG, LEVELING
BASE, COIN BOX, RESTRICTION
ASSEMBLY, BASE WELDMENT
ASSEMBLY, LEG WELDMENT
ASSEMBLY, LEG, EXTENDED FRONT
ASSEMBLY, DOOR HINGE W/FOOT
SCREW, 5/16 – 18, TYPE F
RIVET, POP, STEEL 1/8
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
NOTES
17
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
18
DOOR, CONTROL BAY ILLUSTRATION
20
3
21
4
16
5
2
18
14
22
1
13
6
15
7
12
19
10
17
11
8
9
DOOR, COIN BAY PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PART NO.
20081
20181
20344
22176
22305
22335
22367
23526
23707
23948
23950
23951
23953
24030
3000
3001-03
3002-04
3006-08
3009-02
3011
3036
3226-01
20526
PART DESCRIPTION
SCAVENGER BUTTON
DBV COVER PLATE
DVB MOUNTING BEZEL ASSEMBLY
ASSEMBLY, PLASTIC ESCUTCHEON, V2
ASSEMBLY, DISPLAY, VER. 2
BRACKET, PUSH BUTTON ALIGNMENT
SCAVENGER STOP BRACKET, VER. 2
ASSEMBLY, COIN CUP ADAPTOR CONE
ASSEMBLY, COIN CHUTE, M. PANEL
DOOR PANEL, CONTROL BAY
PANEL, CHANGER MOUNTING
ASSEMBLY, COIN CHUTE
ASSEMBLY, SCAVENGER SYSTEM
BRACKET, LATCH MOUNTING
SCREW, SHEET METAL TEK – 8-18
SCREW, SHEET METAL, TYPE B, #8-18
SCREW, MACHINE, TYPE F, #8-32
#8-32 HEX NUT
RIVET, STEEL, 1/8”, BLACK
SELF THREADING NUT, ¼” STUD
SWITCH, PANEL MOUNT ROCKER
KEEPER, SLAM ACTION LATCH
COIN BOX
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
NOTE
NOT SHOWN
AMS MODEL 28-SLIM MERCHANDISERS
19
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
RIGHT RAIL MOUNT PARTS ILLUSTRATION
8
14
25
4
28
34
24
5
30
27
33
20
3
15
16
32
31
26
6
2
12
22
10
20 9
11 17 23
1
7
18 19 29
13
20
RIGHT RAIL MOUNT PARTS LIST
ITEM
PART NO.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
23898
23898-01
23899
23908
23938
23939
23940
23957
23964
BALLAST, 115V
BALLAST, 220V
DECAL, WARNING
DEDAL, 24V FUSE
DECAL, TRAY POSITION, 1-7
CONTROL BOARD, SENSIT III
HINGE, UPPER, BASE
KICKER, RAIL MOUNT RIGHT
PANEL, RAIL MOUNT RIGHT
COIN CHUTE
COIN CHUTE, LH
BULKHEAD, COIN BOX
CONTROL BAY, WIRE COVER
RAIL MOUNT, VERTICAL SUPPORT
INSERT, RAIL MOUNT
SUPPORT, RAIL MOUNT
BRACKET, LOCK HOLDER
PLATE, COIN BOX RESTRICTOR
18
3000
SCREW, SHEET METAL TEK – 8-18
19
20
21
22
3001-03
3009-02
3009-04
3020
3030
3191
3037-01
SCREW, SHEET METAL, TYPE B, #8-18
RIVET, STEEL, 1/8” BLACK
RIVET, POP, STEEL 1/8
WIRE TIE, STANDOFF
RFI FILTER, 115V
RFI FILTER, 220V
PC BOARD SUPPORT
1
23
24
20730
24025
PART DESCRIPTION
21324
21509
22041
23021
23680
23887
23888
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
NOTES
CHECK UNIT VOLTAGE
CHECK UNIT VOLTAGE
AMS MODEL 28-SLIM MERCHANDISERS
21
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
25
26
27
28
29
30
31
32
33
34
3081
3084-03
3133-30
3172-02
3205-24
3205-34
3226-02
3257
3258
3284
3602
WIRE TIE, .25 PANEL MOUNT
SCREW, SEM, 8-32
ASSEMBLY, FUSE HOLDER AND FUSES
RIVET, ALUMINUM, ¼” NATURAL
GROMIT
GROMIT
CATCH, SLAM ACTION LATCH
TRANSFORMER, 115V
TRANSFORMER, 220V
SWITCH, ROCKER, ON/OFF
HINGE, 2” X 3”
CHECK UNIT VOLTAGE
22
THIS PAGE INTENTIONALLY LEFT BLANK
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
23
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
LEFT RAIL MOUNT ILLUSTRATION
3
8
5
11
12
9
4
1
7
2
10
24
DOOR HINGES AND GLASS PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
PART NO.
23446
23892
23893
23894
23896
3001-03
3009-02
3038
3202
3205-24
3342-04
23901
24023
PART DESCRIPTION
PRODUCT KICKER, LEFT, SLIM
RAIL MOUNT, FORWARD, LEFT
BOX, 35” LAMP MOUNTING
COVER, 35” LAMP
BRACKET, LAMP HOLDER
SCREW, SHEET METAL, TYPE B, #8-18
RIVET, STEEL, 1/8”, BLACK
RIVET, NYLON
FLUORESCENT LAMP, 25W
GROMIT
SCREW, SHEET METAL TEK – 8-18
HARNESS, SINGLE LAMP, 115V
HARNESS, SINGLE LANP, 220V
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
NOTE
CHECK UNIT VOLTAGE
25
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
26
STANDARD TRAY ILLUSTRATION
24
18
6
4
15
7
5
25
20
28
22
17
23
2
13
21
10
1
16
8
14
19
9
11
12
27
3
26
STANDARD TRAY PARTS LIST
ITEM
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
PART NO.
20421
20527
20073
20073-01
23007
23007-01
20133
20220
20465-06
20796-01
20966
23447
23448
23471
23492
23502
23549
23976
24031
23553
23969
24050
24050-01
3001-03
3009-02
3019
3020
3042-01
3295-03
23545
23546
20613
20614
20528
PART DESCRIPTION
HELIX SPLITTER BRACKET
BRACKET, CUP RAIL, SMALL HELIX
TRAY STOP
TRAY STOP, LH
MOTOR W/HOME CIRCUIT, CCW
MOTOR W/HOME CIRCUIT, CW
TRAY DIVIDER SPRING
EXTRUSION, CANDY PUSHER
EXTRUSION, PRICE MARKER
EDGE TRIM, TRAY CORNER
HELIX ADAPTOR
TRAY DIVIDER
TRAY BODY, REDUCED DEPTH
TRAY STOP
TRAY DOUBLER
BAR, CANDY PUSHER
HELIX, SMALL CCW, PAINTED
HELIX, 3-3/4”, CCW, PAINTED
HELIX, SMALL, CW, PAINTED
HELIX SPLITTER
HELIX ALIGNMENT DEVICE
TRAY CORNER, NARROW
TRAY CORNER, NARROW, LH
SCREW, SHEET METAL, TYPE B, #8-18
RIVET, STEEL, 1/8”, BLACK
CANOE CLIP
WIRE TIE, STANDOFF
WIRE TIE, PANEL MOUNT
RIVET, STEEL, 1/8”, PLATED
RIGHT TRAY RAIL
LEFT TRAY RAIL
LABEL SHEET, LOCATION
LABEL SHEET, PRICE
BRACKET, CUP RAIL LARGE HELIX
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
NOTE
OPTIONAL ITEM
OPTIONAL ITEM
OPTIONAL ITEM
OPTIONAL ITEM
OPTIONAL ITEM
SEE HELIX DESCRIPTION SECTION FOR
OPTIONS
OPTIONAL ITEM
OPTIONAL ITEM
NOT SHOWN
NOT SHOWN
NOT SHOWN REF ITEM 2 FROM ILLUSTRATION
AMS MODEL 28-SLIM MERCHANDISERS
27
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
ELECTRICAL HARNESS ILLUSTRATIONS
28
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
29
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
30
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
31
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
TRAY 7
RECEPTICAL
TRAY 7
RECEPTICAL
TRAY 6
RECEPTICAL
TRAY 6
RECEPTICAL
TRAY 5
RECEPTICAL
TRAY 5
RECEPTICAL
TRAY 4
RECEPTICAL
TRAY 4
RECEPTICAL
TRAY 3
RECEPTICAL
TRAY 3
RECEPTICAL
TRAY 2
RECEPTICAL
TRAY 2
RECEPTICAL
TRAY 1
RECEPTICAL
32
TRAY 1
RECEPTICAL
1
RED
3 BLUE
4 GREY
5 PURPLE
6 BROWN
7 YELLOW
8
9
10
11
1
2
3
4
5
WHITE/RED
WHITE/BLUE
WHITE/GREY
WHITE/PURPLE
WHITE/BROWN
MOTOR
COLUMN
MOTOR
7 WHITE/YELLOW ROW
8 WHITE/GREEN
9
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
33
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
WHITE
BLACK
GREEN W/YELLOW STRIPE
34
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
35
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
36
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
37
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
PART NO.
22402
3173
3194
3208
20149
23503
21590
20154
20158
22179
23918
23901
24023
23501
23357
20701
20730
24025
21426
21432
21485
PART DESCRIPTION
POWER CORD ASSEMBLY, 115V U.S. AND CANADA
POWER CORD, AUSTRALIA
POWER CORD, U.K. AND IRELAND
POWER CORD, INDIA AND SOUTH AFRICA
HARNESS, BALLAST/ TRANSFORMER
HARNESS, DELIVERY SENSOR DETECTOR/CONTROL
HARNESS, CONTROL POWER AND REFRIGERATION RELAY
HARNESS, R.F.I. FILTER GROUND
HARNESS, MULTI-DROP BUS
KEYPAD, MEMBRANE, 3X4, GFM
HARNESS, MOTOR DISTRIBUTION
HARNESS, SINGLE LAMP 110V
HARNESS, SINGLE LAMP 220V
HARNESS, TRAY, 6 COLUMN
HARNESS, POWER INPUT
HARNESS, TRANSFORMERAND FUSE
HARNESS, BALLAST, DUAL LAMP 110V
HARNESS, BALLAST, DUAL LAMP 220V
HARNESS, DELIVERY SENSOR DETECTOR,
HARNESS, DISPLAY, SENSIT II
HARNESS, ON/OFF SWITCH
NOTES
110V UNITS
220V UNITS
110V UNITS
220V UNITS
38
THIS PAGE INTENTIONALLY LEFT BLANK
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
39
AMS Glass Front Merchandiser, Model 28 SLIM GEM Illustrated Parts Manual, L0125, REV. A
HELIX ILLUSTRATIONS
6/27
> ,'7+
6/27
> ,'7+
6/27
> ,'7+
40
HELIX PARTS LIST
PART
NO.
HELIX DESCRIPTION *
SLOT
(VEND)
WIDTH
2
1 1/8
5/8
NUMBER
OF SLOTS
(PITCH)
7
14
23
HELIX
OUTSIDE
DIAMETER
1.5
1.5
1.5
TURNS
QTY PER
COLUMN
NOTE
CCW
CCW
CCW
1
1
1
Use With Mini-Dispenser Kit 24026-01
Use With Mini-Dispenser Kit 24026-01
Use With Mini-Dispenser Kit 24026-01
Use With 23549-03 To Couple Motors
Use With 23549-04 To Couple Motors
Use With 23549-07 To Couple Motors
Use With 23549-08 To Couple Motors
24061-07
24061-14
24061-23
Helix, 1.5”, CCW, Black
Helix, 1.5”, CCW, Black
Helix, 1.5”, CCW, Black
24031-03
24031-04
24031-07
24031-08
24031-10
Helix, 2.6”, CW, Black
Helix, 2.6”, CW, Black
Helix, 2.6”, CW, Black
Helix, 2.6”, CW, Black
Helix, 2.6”, CW, Black
3 5/8
2 3/4
2
1 3/4
1 3/8
3
4
7
8
10
2.6
2.6
2.6
2.6
2.6
CW
CW
CW
CW
CW
1 Set
1 Set
1 Set
1 Set
1
23549-03
23549-04
23549-05
23549-06
23549-07
23549-08
23549-11
23549-13
23549-17
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
Helix, 2.6”, CCW, Black
3 5/8
3 1/8
2 3/4
2 1/4
2
1 3/4
1 .5
1 3/16
1
3
4
5
6
7
8
11
13
17
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
2.6
CCW
CCW
CCW
CCW
CCW
CCW
CCW
CCW
CCW
1
1
1
1
1
1
1
1
1
23976-03
23976-04
23976-05
23976-06
23976-07
23976-09
23976-11
23976-17
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
Helix, 3.75”, CCW, Black
4 1/4
3 5/8
2 3/4
2 1/4
2
1 3/4
1 3/8
1
3
4
5
6
7
9
11
17
3.75
3.75
3.75
3.75
3.75
3.75
3.75
3.75
CCW
CCW
CCW
CCW
CCW
CCW
CCW
CCW
1
1
1
1
1
1
1
1
Automated Merchandising Systems Inc
(304) 725-6921 / FAX 304-725-6983
www.amsvendors.com
AMS MODEL 28-SLIM MERCHANDISERS
41