1
Download Programmer Manual TDS 200-Series Digital Real
Transcript
3–22 TDS 200-Series Digital Oscilloscope Programmer Manual Status and Events Data stop > record length, Curve truncated Data start > stop, Values swapped internally 530 Parameter out of range 528 Parameter rounded 527 Parameter overrange 526 Parameter underrange 525 String data too long, truncated 510 Execution warning 500 Message Code Table 3–8 lists warning messages that do not interrupt the flow of command execution. These notify you that you may get unexpected results. 531 Query UNTERMINATED after indefinite response (QYE bit 2 set), normally caused by using a query that returns arbitrary data in a concatenated command Curve data too long, Curve truncated 440 532 Query DEADLOCKED (QYE bit 2 set) Measurement warning 430 540 Query UNTERMINATED (QYE bit 2 set) Measurement warning, Low signal amplitude 420 541 Query INTERRUPTED (QYE bit 2 set) Measurement warning, Unstable histogram 410 542 Message Measurement warning, Low resolution Code 543 Table 3–7: System Event Messages (Cont.) Table 3–8: Execution Warning Messages - EXE Bit 4 Table 3–8: Execution Warning Messages - EXE Bit 4 528 Parameter out of range 530 Data start > stop, Values swapped internally 531 Data stop > record length, Curve truncated 532 Curve data too long, Curve truncated 540 Measurement warning 541 Measurement warning, Low signal amplitude 542 Measurement warning, Unstable histogram 543 Measurement warning, Low resolution Table 3–7: System Event Messages (Cont.) Parameter rounded Message 527 Code Parameter overrange Query INTERRUPTED (QYE bit 2 set) 526 410 Parameter underrange Query UNTERMINATED (QYE bit 2 set) 525 420 String data too long, truncated Query DEADLOCKED (QYE bit 2 set) 510 430 Execution warning 440 500 Query UNTERMINATED after indefinite response (QYE bit 2 set), normally caused by using a query that returns arbitrary data in a concatenated command Message Table 3–8 lists warning messages that do not interrupt the flow of command execution. These notify you that you may get unexpected results. Code Status and Events 3–22 TDS 200-Series Digital Oscilloscope Programmer Manual
