Download MAC 5000 Resting ECG Analysis System

Transcript
System Setup: Define the Exercise Test Setup (Option)
Define the Exercise Test Setup (Option)
Miscellaneous Setup
1. Within the system setup function, select Exercise Test.
2. Select Miscellaneous Setup to define your system’s basic exercise test
set up items. Miscellaneous Setup items for exercise testing are
defined in the table below.
Micellaneous Setup -- Exercise Testing
Item
Description
Timeout
Interval
The time it takes for a menu or prompt to “disappear” from the screen when it is not being
used. You may type in a value between 15 and 600 seconds.
Cubic Spline
Select Yes to turn on the baseline control option.
Event names:
This allows you to create a list of event names, any of which may be selected to label a
patient episode during an exercise test.
Reason for
Termination:
This allows you to create a list of reasons for terminating the exercise test. Select the
appropriate reason at the end of the test.
Patient Data/Questions
1. Within the system setup function, select Exercise Test.
2. Select Patient Questions to configure the system to require entry of
the patient’s maximum predicted heart rate, the patient’s target
heart rate, and to define two Yes/No and alpha-numeric patient data
prompts.
Patient Questions -- Exercise Testing
Item
Max Pred HR
Revision A
Description
Select Yes to require the patient’s maximum predicted heart rate to be entered.
MAC 5000 System
2020300-016
14-23