Download Maintenance

Pre-Ride Inspections
Item
General
Engine Oil
Fuel
Fluid Leaks
Tires
Brake Operation
Brake Fluid Levels
Brake Components
Throttle
Clutch
Front Suspension
Steering
Rear Suspension
Ride Height
Rear Drive Belt
Sidestand
Fasteners
Mirrors
Trunk/Saddlebags
Inspection Procedure
Check the oil level. See page 68.
Check the fuel level. See page 75.
Check the vehicle and the ground/floor for any fuel, oil or hydraulic fluid leaks.
Inspect condition, pressure and tread depth. See page 70.
Inspect pedal and lever movement.
Check front and rear brake fluid levels.
Inspect hoses and connections.
Inspect hand grip and throttle movement.
Check lever operation and freeplay.
Check for leaks, debris and damage.
Check for smooth operation by turning handlebars full left and full right.
Check mounting and inspect for leaks. CHIEFTAIN/ROADMASTER: Check shock movement and air pressure,
verify ground clearance.
Make sure preload is adjusted properly for load. See pages 99-101.
Check for wear or damage. Check drive belt tension. See pages 96-97.
Verify smooth operation, inspect pivot bolt and spring.
Inspect for loose, damaged or missing fasteners.
Adjust for proper rear view.
If equipped, make sure the trunk and saddlebags are properly installed and that lids are securely closed.
67